The end of the month has arrived, along with that same old utility bill. The cost of electricity can be a huge dollar amount, especially in larger homes with larger families. The utility bill has become just a part of life. Driven by the energy consumption of fridges, washing machines, lighting, and so much more, the electricity consumption of your home is dependent upon many things that often cannot be helped. However, there are a few household items that take up a surprising amount of electricity that you may not have thought about! Changing the way that you and your family uses these 5 common items could actually make a difference in that monthly bill in your mailbox! Here’s a list of these sneaky electricity users and some suggestions on how to decrease their energy use.

Personal electronics are a part of our everyday routine, whether it is our smartphones or our laptops. There’s no avoiding charging your device, but between 100% battery life and the idle time it spends charging afterwards, it becomes a major energy consumer. Leaving your cellphone or your laptop plugged in after it has reached a full charge still pulls in a decent amount of electricity. This does no good for your electricity bill, and it actually is worse for your device as well. Leaving your electronics plugged in past the full charge does damage to its long-term battery life.

The Solution: Immediately disconnect your electronic device from its charger when it gets to 100%. Unplug the actual charger, then do it all again when it’s time to charge again. Don’t plug in your devices at night when you go to sleep—that’s 8+ hours of idle charging time that racks up the dollar signs on your electric bill.

Xboxes, PlayStations, Wiis…the number of consoles that are available grow every day, providing entertainment and family fun. However, whenever those devices are on and not being used, it sucks up a lot of electricity to keep it powered.

The Solution: If you’re going to step away, turn the console off. Never let it linger and go idle, as this can use unnecessary energy. Unplug these devices when you travel, as well.

Surprisingly, your DVR or cable box can use as much energy as your refrigerator: one of the largest energy consumers in your home. These devices are always in standby, waiting to be used, which means that they constantly pull in energy just in case you press the On button on your remote. So not only do they use energy when they are on as you are enjoying television, but they are also using energy when they are off.

The Solution: Like the consoles, turn off the TV when you step away. Then unplug the actual DVR or Set-Top boxes when you know you aren’t using them or are traveling for a period of time. This could save you quite a few dollars on your next bill.

Summer time in Colorado means lots of dry heat. Especially if you do not have an AC system, like most older homes and apartments have, then ceiling fans are your only source of cool air. However, when they are big electricity users, so if you can help it, switch them off.

The Solution: Don’t keep the fans on for long periods of time, like when you are out of the house, or at night time when you’re sleeping. You could also upgrade to a more energy efficient model of ceiling fans, which could save you some money as well.

Just like DVRs, microwaves use energy both when they are on, and when they are off. When you’re not using your microwave, it sucks in constant amounts of energy to keep the buttons lit and the clock on. Then the energy levels jump to an all-time high when they are in use.

The Solution: Unplug your microwave when you’re not using it. Keep electricity levels low by only using the microwave when necessary. You could do this by doing things like avoiding defrosting meat in the microwave—letting it sit on the countertop for a few hours instead.

Though they seem small, these 5 household items are mighty when it comes to electricity use, even when they are not being used. If you’re trying to cut down your electricity bill, or want to be more energy efficient, these small changes in the way that you use these everyday items could make a huge difference in the long run.

Simply put, these are electrical protection gadgets that can be used with a wide range of voltages. MCCBs, as they are commonly known, have adjustable trip settings and can hold as much as 2,500 amps in current ratings. They are also used with frequencies that are 50 and 60 Hz and have the following 3 functions:

If you are like many homeowners, your home is a constant work in progress. Your desire to make your home uniquely yours is a constant endeavor. Unfortunately, there are many areas within your home you may overlook in an effort to make your home look appealing. In particular, some homeowners constantly overlook their old light fixtures.

Whether you live in an older home or a home you’ve recently purchased, new light fixtures can transform the look of your home and increase safety. Like other aspects of your home that you use on a regular basis, your light fixtures can easily become worn and dated. Unfortunately, as a component of a major system in your home, damaged light fixtures can be a hazard.

Your home is your oasis, so there is no reason for you to constantly endure poor lighting. With new fixtures, you can take advantage of some of the latest designs that improve your ability to see throughout your home. Additionally, changing your light fixtures will help you realize the following benefits:

These days, advances in technology are helping homeowners reduce the cost of their utility bills. From LED lighting technology to incandescent lights, new lights increase lighting in homes while decreasing homeowners’ costs. This is especially helpful for homeowners who are concerned about their impact on the environment; reduced energy consumption helps reduce the negative impact on the environment.

Most electrical problems in your house will more often than not require an electrician to fix them, but sometimes, if you have some time on your hands and the right tools, there are certain things you may want to tackle yourself. In this post, we will look at replacing a junction box and fixing backstabbed wires.

Replacing a Junction Box Cover

Your existing junction box should already meet the required National Electrical codes of standards, but if you happen to find one in your home that is missing a cover, it is best to have it replaced immediately. Because the splices where wires are connected together are housed in a junction box, they could end up being inadvertently damaged and become a fire or shock hazard. If this has already happened, you may want to ask a qualified electrician for help.

Fixing this is as simple as using the original cover and some screws, or if it is lost or damaged, buying a new one for a few cents at your local hardware store and installing it with the accompanying screws.

Backstabbed Wires

Backstabbed wires occur when wires in newer switches and receptacles are pushed into the back. These are more likely to come loose than those that are held in place by screws. A wire that comes loose will most likely cause the terminal to stop working, but in some cases, it may even cause an electrical fire.

Carry out a check to see whether there are any switches with backstabbed wires. If you find any, release the wires and then attach them to the appropriate screw terminals on the switch. If you do not feel comfortable doing this yourself, your electrician should be able fix this for you pretty quickly.