The most dangerous time of the year for electrical fires in Des Moines is undoubtedly during the holiday season. Christmas decorations, in particular, lead to a dizzying amount of house fires each year. On average, over 200 homes burn down each year directly because of Christmas Trees and other decorations, and this figure doesn’t include the small, contained fires and those caused by candles. Needless to say, safety should be a major priority when planning out and putting up your holiday decorations.

Many electrical problems are caused by outdated technology and old incandescent Christmas lights; when you start digging out your decorations, ask yourself if it is time for an upgrade. While more expensive, modern LED Christmas lights use far less power, generate less heat, almost never require bulb replacements, and last far longer than their incandescent ancestors and inexpensive alternatives. In terms of cost alone, the new lights will likely pay for themselves in energy savings after only one, maybe two, holiday season(s).

For instance, running 1,000 incandescent Christmas lights for a month in Iowa will likely cost about $122, whereas the same amount in LED bulbs (which shine brighter, by the way) will cost less than $1.50. That extra $120 can go a long way towards buying a few better presents or do some real good in the community. By upgrading your lights this holiday season, you’re ensuring that you don’t have to hike up your energy bill to decorate the house each year while keeping the family much safer than they would be with your old lights.

For any strand you choose to not upgrade this year, be sure to thoroughly check each strand for frayed wires or cracked bulbs. Incandescent bulbs can easily create a completed electrical circuit with a Christmas Tree, gutter, or just about anything else it may be hung upon, creating a very real fire hazard.

If you decide to get out the extra-tall ladder that you seem to only use to decorate and un-decorate the house each year, take special care to avoid power lines. One of the easiest ways to get injured when using a tall ladder isn’t actually from falling, but from electrocution while moving the ladder. Take the time to locate all power lines before beginning work and always get down and collapse the ladder before moving anywhere around power lines.

No carpeting, drapes, curtains, or other fabrics should ever come into contact with your lights. Furthermore, be sure to never wrap cloth-like decorations around your lights. The mesh commonly found at holiday stores is made for wreathing and often contains metallic elements for a shimmering effect, making it especially potent at conducting electricity and starting fires in the event of a short.

We hope you’re safe this holiday season, but if you happen to overload your circuit breakers or have a concern about the lighting of your holiday decorations, be sure to give us a call right away. The electricians at Electrical Gurus want to help to keep every Des Moines family happy and healthy throughout the holiday season.

Cordless tools have been around for decades, but the technology is constantly evolving. They offer portability, convenience, and access to a wide ranges of devices to make any project go smoothly.

Overall, Milwaukee stands out as having the highest quality tools, but at a much bigger cost. DeWalt offers reasonable quality at a good price, while Makita features truly unique options. If you already own a certain brand of tools, the best advice is to stick with that brand. DeWalt tools are generally the best value per dollar, while Milwaukee is best for heavy-duty or high-demand applications. Many professionals simply try these tools out till they find the brand they prefer, then stick with that brand for all their tool needs.

In just about any home you visit, the kitchen is often the focal point and the most frequented area. Think about the amount of work that gets done in such a small amount of square footage. With massive appliances like a fridge, stove, or dishwasher doing hours of work a day, it is important that your home electrical system has been planned and installed properly to support this work force.

In the kitchen you have some of the most energy hungry appliances you can find in a home. The energy to keep these running comes from the electrical outlet. If the outlet is not designed to give the amount of electricity that the appliance requires there can cause damage to the appliance and to your home’s electrical system. For some of the main appliances in the kitchen the electrical outlets should be:

Of course with the size of the appliance these requirements can vary. As fridges become larger and stoves get more features, the appliance may require much more. It is important to check the requirements of your new appliances prior to installation. Make sure that you have an expert electrician check your outlets and compare them to the requirements of your new appliances.

To make sure appliances are getting the right energy requirements, you can follow the outlet to the electrical panel. When there is a heavy load on a circuit, it is important to check that the appliances are given their own circuit and that the wires behind the wall are up to code to support the capacity. If too many appliances are on the same circuit you can continuously trip the circuit causing larger problems in the long run. Also, if the wiring does not comply to code there is a chance of an electrical fire. This is a scary problem because it can hide behind the walls for years before it can happen.

If you are planning on purchasing new kitchen appliances or remodeling your kitchen make sure that you have done your homework. Review what your kitchen and home’s electrical system are capable of and what your new appliances require. The best way to know for sure is have an expert electrician do a thorough review before installing the new appliances. This can not only put your mind at ease, but avoid expensive bills in the future.

A lot of serious contractor related problems can be averted by doing just a little research. After nineteen years in the trade, I have found that if both home and business owners follow these tips, they almost always have a pleasant experience:

1. Check the license. Never hire an unlicensed contractor or electrician in any capacity. It may look like a good deal, but it may end up costing you more than extra money in the end. Unlicensed contractors are not bonded and have not taken any kind of exam to be assured they have the knowledge to perform the type of work you may need done. Also, it is very unlikely they have liability insurance (more on that below).

2. Check for insurance coverage. By law, Hawaii licensed electrical contractors will have liability insurance coverage. The bond that is required for electrical contractors in Hawaii is generally $7000 – an extremely limited amount. Look for an insurance policy of at least $1 Million.

3. Ask for a Journeyman card for proof of license. All electricians are required by law to be a journeyman, having passed all Hawaii State requirements. Ask to see the card of anyone performing electrical work on your home or business. This is very important and makes sure you have qualified workers.  Your persons and property are at risk if they are unlicensed.

4. Ask what kind of work the electrician has done in the past. It is usually a pretty good indication of what you should expect in the future.

5. What is the electrician’s real concern as you speak with them about your project? Are they concerned about what you are trying to accomplish on your project? Are they up front and confident about pricing? Do they care about your needs and the needs of your property?

Following these tips will give you the ability to find the right electrician for you. Blue Sky Electric is happy to provide you with more information. Give us a call with any questions and we will be happy to assist you.