Add the perfect custom finish to the front of your home with outdoor hanging lanterns and wall lanterns.

When using two outdoor lanterns, they should measure about 1/4 the height of the front door(s). When you are using only one lanterns, 1/3 of your door height is appropriate.

Outdoor hanging lanterns should be centered over your front door(s), high enough so that the doors may open and close freely. If you have a picture window or archway above the front door, center the fixture so that it may be seen from inside your home.

Wall lanterns surrounding the front doors should be proportional to your home, when in doubt, size up! Remember, fixtures appear smaller from curbside viewing than most people would imagine.

Wall lanterns are also appropriate for rear and side entrances and by garage doors – same rule of thumb for sizing applies for these areas.

Path Lighting should be placed 6′ apart to ensure adequate beam spread.

Be sure to make your space functional! Task lighting is an important piece of the design; it will provide guidance and illumination in the necessary areas to ensure safety.

Focused illumination on key holes and security pads allows for easy access when you are entering and leaving your home at night. Outdoor LED wall lights or recessed spotlights work well in these areas.

Add path lighting to walkways every 6’ to provide adequate beam spread. This will create curb appeal ambiance and visibility when walking at night. Don’t forget to add light near the house numbers – this can help in emergency situations and for deliveries!

After the sun goes down be sure your home has the same curb appeal as it does during the daytime by adding outdoor and uplighting to the landscape.

Illuminating trees or other elements from below will create soft focal points in the landscaping after the sun goes down. Use a flashlight to test where you’d like the light to hit, then mount the fixtures accordingly. Be sure to mount fixtures out of grass for ease of mowing and other landscaping tasks.

Be sure to view your outdoor lighting after dark before signing off on a project; it’s easy to make necessary adjustments to refine your outdoor lighting design.

To avoid being “that neighbor”, be sure to eliminate glare and make sure your outdoor light fixtures do not create “light trespass” into your neighbor’s property.

Radiant heated driveways have become a very popular option for homeowners across the Midwest and east coast, where winter temperatures often present quite the challenge to homeowners with the snow and ice that they bring. Can you imagine never having to shovel snow off your driveway again?

Imagine the convenience! True, you won’t be able to claim a “snow day” to get out of going to work, but at least you can leave your house on a whim. But what exactly are heated driveways, and how do they work? Will you need to have maintenance done on them? Keep reading to learn more.

Driveway heating systems use radiant heating technology to warm concrete, asphalt, pavers, and various other floor materials—whatever your driveway is made of a heating system can benefit you. The difference is, the installation of a driveway heating system is much easier and less invasive than a typical radiant hydronic heating system.

You still certainly need a professional to install the system, and it does require the driveway to be laid down after the installation of the heating system, but we’re happy to talk to you about your options!

Also called snow melting systems, driveway heating systems uses a sensor to detect moisture, which signals a controller to supply power to the heating cable, which then warms the driveway. This prevents snow and ice from even beginning to accumulate, removing the inconvenience for you while you sleep or otherwise enjoy being indoors out of the elements!

Snow melting systems have very, very few components. It’s true that age and natural wear and tear may eventually necessitate a repair or eventual upgrade someday. However, these energy-efficient systems are relatively maintenance free. Still though, it would be wise to have our technicians check out your system on perhaps an annual basis—before winter—just to ensure everything is functioning as it should.

Want to improve your yard? One of the easiest ways to make it more beautiful is to add outdoor lighting. These multi-functional decorations can both help brighten your property and let you use it round-the-clock and make it even more beautiful by adding some soft, highlighting illumination. While outdoor lighting used to involve substantial work, including running bulky and often-ugly electrical runs, today’s homeowners have a number of new technologies that can safely and permanently run electricity without breaking their bank or compromising on beauty. Here are a few of the great options available to homeowners today.

LED lights are more affordable than ever before, and come in a massive range of styles, colors, and can be utilized for nearly any purposes. Perhaps the best part about them is that they are so small that they use very little electricity, while still offering a considerable amount of light.

LED lights come in many different forms, including spotlights, rope lights, or individual bulbs, meaning you can apply them almost anywhere. Looking to illuminate your deck? Run a few strands of LED bulbs across the top for a mood-setting glow. Want to highlight the beauty of your garden? Install a few lights around your prized plants. The possibilities for installing LED lights are endless.

Pools have had lights for many years, but a modern pool light offers extra options that were never available before. Turn the water in your pool or hot tub a fun color, or cycle through different colors quickly with color-changing bulbs. Additionally, modern pool lights need far less electricity to run and can offer even brighter solutions than ever before. Plus, a pool light can help you stay safe at night by making sure you see the water at all times.

Pathway lights can offer a lovely dressing for your existing paths as well as help you avoid any potential trip hazards. If kids leave toys out on the path, you can avoid these obstacles with a few simple pathway lights. Some models of pathway lights are even solar powered, gathering sunlight during the day to power themselves and then turning on at night with a subtle glow.

Security lights can help shine light in pivotal spots of your home during darkness hours, such as near front-facing windows or your front door. Many of these lights are motion-activated and require very little work to install, but can flood an area with bright light to help you spot and keep away potential intruders. Other types of security lights stay on all night long and offer you the peace of mind of knowing your home is not shrouded in darkness that encourages illegal activity.