This problem is similar to the heating appliance issue we started with.  Overloaded outlets are more than just a circuit-tripping annoyance, they can also become a danger quickly!  If you’re electrical panel is doing its job properly, the circuit breaker will trip before there’s a problem, but relying on a safety measure is not a safe practice.

Overloaded outlets are simply circuits that have too many things plugged into them.  This can happen by:

All of these practices can overload your outlets by putting too much demand on the circuit.  In a best case scenario, the circuit breaker trips.  The worst case leads to excess heat at the outlet, melting plugs and sockets or excess heat on the circuit which melts insulation from wiring in the walls, leading to a house fire.

Of course, even if you follow all of these protections, things can happen that are outside of your control.  That’s when your best defense is a strong safety net.  Early detection and warning for house fires is the best way to survive in an emergency.  The sooner you’re aware that there is a fire, the higher your likelihood of survival.  For the best defense:

If you’re planning on selling your home in Maryland, Virginia, or Washington, DC, it’s extremely important that you make sure everything is up to code. Some code violations are illegal, others can be dangerous—some are both!

Wiring mistakes – most wiring mistakes are made by handymen doing electrical work instead of certified electricians. Among the worst we’ve seen are electrical systems that were hooked up using extension cords instead of dedicated electrical wires!

Overcrowding with too many wires – overcrowding is another sign of a contractor who didn’t know quite what they were doing. Since poorly maintained wires can get hot, any place where there are masses of wires packed tightly together can create a major fire hazard.

Exposed wires or junction boxes – frayed or exposed wires can pose a major electrical safety hazard and should be either replaced or patched up. And while junction boxes should be within reach, they should not be so easily accessible that they can accidentally be touched.

Ground Fault Interrupters (GFI) outlets or breakers not working properly – GFI outlets are especially important for the kitchen, bathroom, and anywhere else where water or humidity could create an electric shock risk. If these outlets are not working properly, you could be in danger without even realizing it!

Mixing line- and low-voltage wires together – the National Electric Code (NEC) expressly forbids this, but we often see it, especially when dealing with HVAC installations.

Light fixture or ceiling fan installed without a junction box – junction boxes are required to be installed so they are always accessible and are used to run multiple conductors in two or more directors. The most common problem we see is junction boxes installed out of reach in a concealed wall or ceiling space.

Missing or damaged switch and outlet covers – plate covers on switches and outlets are important for preventing electric shocks. If you’ve recently painted or remodeled the room, you may have taken the covers off. Make sure you put them back on!

Damaged outlets – damaged outlets can cause appliances and anything plugged into the outlet to malfunction and can also create a major fire risk.

These days, many home sellers are seeing the value of having an electrical inspection prior to putting their home on the market. Having the ability to correct any electrical code violations ahead of time may help in avoiding delays in the negotiation and sales transaction.

If you’re planning on selling your home in Maryland, Virginia, or Washington, DC, call Kolb Electric! We can perform an electrical inspection and make any necessary electrical code corrections. Don’t wait—call us today!

Early Christmas morning in Stamford, Connecticut, the fire department rushed to the aid of Madonna Badger’s family as their home was engulfed in flames. The simple act of discarding ashes from the fireplace turned deadly when those ashes were not fully extinguished, sparking the blaze from outside the home. The heartbreaking news that both of Badger’s parents and her three young daughters perished in the fire turned what would normally be a joyous holiday into a time of mourning for friends, family, and community members in Stamford. Our hope, at ElectricMan Inc. is that this sad story will help drive home the message that smoke detectors are the most important safety feature that you can have in your home.

“Stamford’s team of fire investigators have stated that the now-demolished mansion at 2267 Shippan Ave. did not have an operational smoke detector system, and the second floor of the home was lacking building certificates” – SouthburyPatch.com

Madonna Badger’s older home was being renovated at the time of the fire, with scaffoldings still in place throughout the holiday, and authorities speculate that the main reason the family wasn’t able to escape is because their home was not equipped with an operational smoke detector system. A new smoke detector system was probably in the plans for this home renovation, but the work had not been completed yet, leaving the family who was still occupying the home unprotected. Even if you are in the process of a smoke detector replacement project, it is vitally important to ensure that your family is protected throughout the process if you will be living there during the renovation.

Had the home been equipped with a functioning smoke detector system, the family’s chances for survival would have been greatly increased due to the vital moments that an early warning can provide. However, simply having smoke detectors isn’t enough. Annual battery replacement, testing twice a year, and smoke detector replacement every 5-7 years are essential regiments to ensuring your system is consistently functioning as designed. For more guidelines for smoke detector replacement and maintenance, please read our comprehensive smoke detector replacement and maintenance blog.

No matter how new or old your home is, you can never assume your smoke detector system is working correctly. If you have concerns, or your home hasn’t been updated to a modern, interlinked, whole house smoke detector system, now is the time to take action and ensure your family’s safety. Contact ElectricMan Inc. today, by phone at 972-792-7270, or through our website at www.electricmaninc.com, to discuss your options and receive a free quote to bring your home’s smoke detection system up to date. Nothing helps you sleep soundly at night better than the knowledge that your family is safe, and we would like to help you achieve that today.

Among the more obvious pieces of electrical safety advice you may have encountered is to never saw the third prong off of an electrical plug in order to fit it into a two-prong outlet. But just because we can recognize that as a self-evidently bad idea doesn’t mean everyone knows why it’s dangerous.

Two-prong outlets have only two wires: a hot wire and a neutral wire. But a three-prong outlet also has a ground wire, which is a safe place for unexpected bursts of current to go when they occur. Without that connection between the ground wire and the plug, wild current can go anywhere: into your electrical device, where sensitive components can be destroyed, or worse, into your body. Shock and electrocution are more likely to occur when no ground wire is present.

Moving On Up

Three-prong outlets didn’t become standard in North American homes until the late 1960s, so while modern homes should be in good shape, there are plenty of homes out there with old two-prong outlets.

As a quick fix, you might be tempted to use adapters that convert two-prong outlets to fit three-prong plugs. You should resist the urge to use these so-called “cheater plugs”, however -- the ground wire is there for safety, and simply bypassing it creates a potentially serious hazard.

Instead, you should seriously consider upgrading the outlet if you need to regularly use three-prong plugs in that area. If you live in an older home where most of the outlets are two-prong, this is an upgrade you’ll need to do sooner or later.

When it comes to upgrading two-prong outlets, there are two basic options. The best choice is to have ground wires installed so that the outlets are fully up to the current standard. Unfortunately, this can involve several hours of electrical service and may require some cutting into walls, depending on how many outlets are being upgraded and how the home is configured. It may be a big undertaking, but it’s a quality investment in your home and safety.

A cheaper alternative is to upgrade to a ground fault circuit interrupter outlet, or GFCI. These outlets are capable of shutting themselves off if an electrical shock risk is present, but they won’t protect sensitive electronics from surge damage. The trade-off is that there’s no need to run a ground wire.

Out With the Old, In With the Old?

If you don’t like either of these options but you’re having trouble with a two-prong outlet, it’s technically not a violation of code to replace the outlet with another two-prong version. Just keep in mind that this arrangement leaves both people and electronics vulnerable, so use these outlets with care and consider making a plan to upgrade later.

Ready to upgrade those old outlets? Start the process today by scheduling a no-obligation consultation with your licensed, local electricians.