Now encroaching into Post-Graduate territory, the 20+ year-old student has a more refined set of needs. Cool isn’t a requirement as much as function. The grad student is faced with the problem of desperately wanting to be a sophisticated adult, but is hindered by full schedules and mounting education costs. Be a hero by giving your favorite 20-something student a gift that acknowledges this new phase of their life:

With the winter months closing in, there are some things you need to know before you pull out that portable electric heater. Sure your feet may get cold under your desk or your bathroom is a little cooler than you would like in the morning, but before you plug in that space heater you need to get informed. These are some tips from your Santa Monica electrician when using any space heaters this winter.

Your space heater should be placed as close to the center of the room as possible to ensure nothing comes in contact with the heater. You don’t want furniture, drapes, paper products or anything else touching the heater and creating a fire hazard.

Ventilation is crucial to any electrical appliance. It needs room to breathe so to speak. Heaters should never be placed up against a wall or any other surface. Anything electrical needs proper ventilation. This can be taken care of by an electrician. Santa Monica homeowners who are not sure what is needed should definitely contact a professional.

The last consideration when pulling out the space heaters this winter is the cord condition. Before you plug anything in, check the cord to make sure it is not frayed or damaged in any way. This can be a major fire hazard if there are any loose or exposed wires or areas where the insulation around the cord is thin. The heater should be plugged directly into an outlet and never an extension cord. The cord should also run along a wall or somewhere out of the way of foot traffic to avoid it becoming damaged.

These tips can be applied to any electrical appliance. If you have any more concerns or questions about a space heater, give The Electric Connection a call today. We are here to answer any questions you may have.

When installed and operating properly, security lighting like motion lights can add a great measure of safety and security to your Bethesda home. But these systems are not flawless, and they come with their fair share of frustrations and difficulties. Having issues with a motion light that stays on at all hours? The certified electricians at Kolb Electric have an answer!

Looking for a reliable electrician to perform an outdoor lighting installation for your home in Maryland? Contact Kolb today!

The good news is there are only really a few potential causes for this, and many of your solutions are a fairly quick fix. There is an issue or two that might require a professional’s assistance, but we’ll get to that later. For now, your problems are most likely caused by:

If your outdoor lighting installation is still acting up, we’re sorry to say that there’s a good chance you’re dealing with damage that requires the help of a certified Bethesda electrician. Most likely what you have is a damaged motion light fixture. The damage can come from a few sources, one or two of which might sound familiar:

If you’re having issues with your security lighting in Bethesda, you can always count on the experts at Kolb to get you the service and dependable solutions you need! Contact our team today to find out how a certified Kolb electrician can help you restore your security lighting, or if you want to learn more about our outdoor lighting installation services!

We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion