Watch cascading spiral turns and vibrant emanations through a glass curved body bending and zig-zagging in a brilliant display of illumination.  New “convertible” pendant light fixtures from Eurofase Lighting are turning heads and making a grand debut with the introduction of Bloor, Spadina, Finch and Dundas.

All four fixtures may be easily converted from pendants to flush mount fixtures right out of the box! Dazzling lighting designs create a fantastic play of shadow and light as the fixture body diffuses the light, turning straight solid edges into an illuminating serpentine pattern.

“Bloor” features Rippled Hand-blown Clear Press glass with Chrome accents in a robust bell-shaped pendant design.

“Spadina” features Rippled Hand-blown Clear Press glass with handsomely defined swirling scales in a modern-contemporary orb shape.

“Finch” is defined with Rippled Hand-blown Clear Press glass and Chrome accents in a brilliantly scalloped combination of shell-like symmetry.

“Dundas” presents a unison of floral-like blossoms in Rippled Hand-blown Clear Press glass with Chrome accents.

Eurofase Lighting has been powering up the lighting industry with outstanding ceiling pendant lights, wall lighting and chandeliers since 1989.  They are on the cutting-edge of technological advancement with some of the most innovative decorative pendant lights and chandeliers.  See the entire line of pendant lights and ceiling fixtures from Eurofase at 1800lighting.com.

Experience the magic of all new designs from Eurofase Lighting at 1800lighting.com or visit your nearest Capitol Lighting showroom.

In our new 5th Wheel RV, we received some ceiling mounted 12VDC florescent fixtures. They were equipped with 2 each 18”, 15W tubes and electronic ballasts. The fixtures are a “Low Voltage RV Luminaire” from “Direct Sourcing Alliance” identified as “Type RVL 18RNB-W”, “2 x 15W”, “Input Rating: 12V DC, 30W”. Their performance has been dismal with operation limited to, initially 30-45 minutes before shutting down due to overheating of the ballast. The “on” time got progressively shorter over the next few weeks. The overheating was certainly not due to ambient temperatures which have been in the low 70s or cooler. On disassembly for conversion to LED operation it was discovered the ballasts have discolored due to high heat (see closest end of ballast in Picture 2).

During review of options for LED conversion I was looking for a natural light color temperature with equivalent lumen output to the two 15W florescent tubes. I settled on the SuperBrightLEDs part number RLBN-NW30*3SMD which is a 19.5 inch rigid strip with 30 each 3SMD modules. The advertised light output was 603 lumin at a color temperature of 5600K. The two 18”, 15W tubes were stated to produce 825 lumins each so I was a little concerned about light loss especially since I was going to have to cut 6 LED modules off each of the two strips to fit inside the existing fixture. I bought a 3rd strip but in the end did not use it as the light was ample.

I first started by removing the “guts” of the florescent leaving some length of the switched power wires for future use. See pictures 1, 2, and 3.

After cleaning the interior of the fixture with alcohol for acrylic tape adhesion I fitted the rigid LED strips and cut 6 LED modules from the length, then mounted the strips using 3M double sided acrylic tape. Finally, completed power connections to existing fixture switch circuit. See pictures 4 through 10.

;

1.  Size and install smartly:  Whether you are installing a crystal chandelier over your dining room table or as a central design feature in your master bedroom, the diameter and height of your fixture must be in proportion to other items in the room.  The diameter of a dining table fixture should be 12 inches less than the diameter of the dining table.  The height of the chandelier should allow for a clearance of 30 inches from table top to the bottom of the fixture.

Quoizel’s “Tricia” chandelier adds elegance to this contemporary dining room.  * Interior design by Sandra D’Amata International, Inc.

If your crystal chandelier will be a central focal point in your foyer, living room or master bedroom, take into account your ceiling height and choose a chandelier that may be installed to leave at least a 7-foot clearance from the floor to the bottom of the chandelier.

2.  Reflect Resplendence:  The true beauty in a crystal chandelier extends far past the light source, decorative finishing and crystal configuration.  Crystal facets reflect and refract a brilliant array of colors and illuminating effects, especially when combined with sunlight and/or electric light sources.  Matte finishes on furniture and surrounding walls work well with crystal illumination.  Avoid creating glare and unflattering shadows off metallic or shiny surfaces.

3.  Choose the Right Bulb: Most chandelier bulbs will be candelabra-based, yet what type of candelabra bulb you choose will make a tremendous difference in both the total presentation of your chandelier and the overall illumination in your room.

Crystorama’s “Mercer” chandelier–installed with dimmable LED candelabra bulbs–provides magnificent illumination in this master bathroom.*

Frosted bulbs provide a more subdued illumination. They are recommended for most traditional dining room chandeliers.  Clear bulbs work well with chrome finished retro-modern chandeliers and may add to the radiant sparkle of modern crystal chandeliers.

For a more traditional look, flame tip bulbs are the right choice.  Flame tip bulbs also look best in chandeliers with faux drip-candle holders.  Torpedo bulbs are less tapered and present a contemporary look.  Round bulbs add an eclectic vibe to a traditional chandelier.  Uniquely-shaped and/or textured candelabra bulbs may add a custom-designed artistry to your chandelier.

As a homeowner, you face loads of trials and tribulations. Home maintenance, jobs, relationships, and plenty more! Life is rough enough without adding the uninvited members of the animal kingdom into your home, and when you find a chewed wire, you’ve unfortunately got just that! But, hey, don’t stress. The experts at Kolb Electric are here to help!

Why do rodents chew on the wiring in my home?

Rodent teeth are very capable of doing serious harm to your wiring. Why do they even chew on wires? Well, interesting fact, that. A rodent’s front teeth never finish growing, so they chew on anything around to control the length of their incisors. Cool fact, but bad news for your wiring!

Rodents chewing on electrical wires can bring you a world of frustration at the minimum, but can be a source of serious harm at worst! An infestation left unchecked can cause:

Well, traps are always an option, of course. But that remedy tends to be a little unreliable. The unfortunate fact is there’s no magical remedy here. There’s no magical rodent-proof wire coating, or specially crafted mouse vacuum. It really comes down to prevention, and failing that, quick action. To prevent a rodent incursion:

What do I do if I already have a rodent problem?

Call a pest-control specialists right away. It’s frustrating, and costs money you didn’t want to spend, but with each passing week you run the risk of paying more than a few lost cracker crumbs. Rodents chewing on electrical wires is no joke, and left unaddressed will leave you in a bad way, electrically speaking.

Once the nests have been handled, call on an electric professional (like us!) to inspect wiring as soon as possible. Damaged wiring can be caught and fixed before you end up with a real costly problem on your hands.

If things don’t go your way and you end up with some damaged wiring, don’t stress! The experts at Kolb would love nothing more than to assist, bringing you the expertise and service you need to set your wiring right again. Contact us today to learn more about our repair and installation services, or to set an appointment!