/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

With the explosion of home renovation shows such as House Detective, Holmes On Homes and Income Property, you would be hard pressed to find the person who isn’t aware that any renovation of an older home would require the specialized services of a licensed, qualified electrician. Often conjuring up images of the older, ‘quaint’, 40+ year-old home, the word “renovation” has almost become synonymous with a neglected home in disrepair, complete with bundles of wiring that could pass for extension cords. Obvious stuff that would appear glaringly unsafe to the average person.

What doesn’t come to mind is your typical, one or two-story home built anywhere from the 1980’s to early 2000’s.  But in today’s housing market, doing a kitchen and bath remodel could mean the difference between a sale and seeing no movement at all. Whether it’s to compete with newly built homes in a weak housing market or to increase the value and enjoyment of one’s home, a homeowner would be prudent to consult a licensed electrician when making any updates to their home. There can be unforeseen dangers when combining newer, modern appliances and lighting with existing wiring and a licensed electrician can inspect and update your home’s electrical framework, ensuring its safety and increasing energy efficiency.

In a case of one trend bringing about another, the increasing popularity of in-home offices and theater rooms has  sparked the inclusion of structured wiring, or heavy-duty electrical and data cables designed to manage the latest (and yet-to-be-invented) electrical devices. Take into account that almost 50% of new homes built in 2008 included structured wiring and you can see that this trend could very well become the norm in the near future.

For questions or a free consultation and estimate on updating your home’s electrical infrastructure, call Bryant Electric Service at 512-402-8587.

Everyone is looking for ways to save power.  Whether to save money or the planet, one of the best and most popular ways to save power on lighting is by installing dimmer switches to control your lights.  Besides saving power, they’re also great for setting the mood in your home.  More and more dimmer switches are being installed in American homes every year.

Dimmer switches are easy to install, even for an everyday person. Of course, even an easy installation can be problematic, so you should always contact the best Dallas electrician to ensure that you’re doing things right, or to perform the dimmer switch installation for you if you don’t want to take a chance of making a mistake.  Either way, here are some important do-it-yourself electrical tip to keep in mind about dimmer switches: