A Look Back At 2011

Texas residents suffered damaging and costly electrical problems in 2011. Three major blackout incidents, two of which happened in the winter months of February and December respectively, left residents without heat and without power for hours and, in some cases, days at a time. Equally distressing was the 71-day drought that had Texans begging their local Dallas electrician for relief, as 100-plus degree heat waves weakened the power grid once again and left residents without air conditioning or electricity.

2012: Not Much Better

Unfortunately, 2012 does not seem to be the year for relief. Experts warn that several factors point to an even more severe blackout and power grid problem in the state of Texas for 2012.

 These factors translate into miserable, costly blackouts and power grid failures throughout North Texas.

Dallas Electrician Company Provides Solutions

There are some solutions for customers looking stay ahead of the game when it comes to protecting their home and appliances from the inconvenient and sometimes dangerous conditions that stem from power grid failures. With the help of a knowledgeable electrician, Dallas residents can acquire an indoor generator, which can serve as an effective emergency power source for your home or business in the event of a blackout.

One of the most convenient features of these indoor generators is that there is no need to use electricity to recharge the battery bank that runs the generator. Without the mess of a fuel-powered engine generator, customers can count on reliable and steady power output and a quiet supply of power for your appliances. Furthermore, the convenience of a solar-power or wind-power battery charge ensures that customers need not worry about using electricity to recharge generator batteries.

A variety of ways exist to quickly and efficiently complete an electrical installation. One method involves using pre-made and pre-fabricated conduits, cables, panels, and devices. Pre-fab strategies cut down on repetitive labor costs and scrap material waste.

Furthermore, pre-fabricated components are assembled in quality-controlled factories by highly trained technicians. This ensures that every device and termination is in working order and properly connected. These technicians work faster and cost less per hour than a journeyman electrician, therefore saving the contractor time and money.

Another option to increase efficiency involves using pre-wired devices. They can be used for repetitive tasks like receptacles, switches, light fixtures, data ports, or fire alarms. They save time by eliminating the need to terminate each device individually. Instead, boxes are made to order and ready to install. The desired length of cable is attached and ready to run to the nearest junction point. Simply attach the box, route the cable, and connect to the supply wires. Most suppliers prepare a custom quote, further reducing time spent by the foreman planning and ordering parts individually.

Pre-wired panels are possibly the simplest way to save money, as they require no special tools. Wiring up a panel at the shop before heading to the job site allows you to function test it before installation. This ensures proper functionality. In addition, it keeps the interior of the panel away from weather and other possible sources of job-site damage. For larger or more complex panels, suppliers can be arranged and have the work performed by specialized technicians. Panels can even be ordered with pre-cut and pre-terminated lengths of cable or cord.

Most electricians have used pre-formed conduit, especially PVC which requires specialized tools to bend. However, entire runs of pipe can be custom ordered and pre-shaped. Especially useful in underground conduit networks or when complicated bends are required, these pre-made conduits drop in place and fit perfectly to the engineer’s prints. They also ensure that conduits are not damaged or kinked during the bending process and that no sharp edges or rough spots are left to damage wires or cables.

If the project demands it, entire buildings can be pre-made and pre-wired in a factory setting by trained technicians who specialize in quickly and efficiently preparing custom ordered buildings. Especially useful in industrial settings, these buildings come complete with all interior and exterior lights, switches, receptacles, and control wiring.

Often, motor control centers (MCCs) for large industrial installations are constructed this way. Therefore, on-site electricians are free to begin immediately running cables to motors and devices, with simple termination points inside a completed building. In addition to using fewer electrician hours, they also reduce required hours from other tradespeople such as welders or cladding installers.

Finally, pre-fab strategies are a great solution for reducing material waste, worker hours, and downtime while making deadlines a snap. Projects run smoother with fewer errors.

Electricians are often looked upon as professionals that have to be called in only when something isn’t working. However, the fact is that a great, reliable and experienced electrician would also be able to provide you advice on the type of fittings and fixtures or electrical installations that would look good and add functionality to your home.

Regardless of how beautifully designed your home is, if it doesn’t have the right type of lighting that can only make the rest of the features and elements look dull and drab. But you can add accent lighting to various areas of your home to add to its aesthetics and functionality. It’s important to plan the lighting well as it helps create enjoyable and beautiful spaces on your property.

Some light fixtures are used only in areas where specific tasks are going to be carried out such as kitchens, study and home office spaces etc. But in addition to this task lighting, your home also needs lighting features that help accentuate the look of various installations in your home; this is referred to as accent lighting. This lighting includes fixtures such as subtle spotlights, or miniature pot lights.

Accent lights aren’t meant to throw bright light and fill the entire room with light; they are used instead to highlight features such as artwork, paintings, pieces of décor or some interesting architectural feature in your home etc.

These lights are soft and add a very comfortable and elegant look to the space. In fact you can use accent lighting to enhance the appearance of the outdoor areas of your property as well. They can be switched on to create a party mood or lend a more casual look to the common living spaces or alfresco areas of your home.

There are a number of benefits to getting accent lighting installed, such as:

While you can use these lights by themselves to maintain a very casual look in a room, they can also be used in tandem with other lighting installations such as track lighting, recessed lighting, under counter lights, floor level lights as well as spot lights etc.

Since accent lights aren’t meant to be very bright, they use less energy; in fact, you can add to their efficiency by using LED bulbs in them – this can make them up to 80% more energy-efficient that standard bulbs.

There are always some areas in a home that don’t get sufficient natural light; you can install accent lights in these areas, and these fixtures look great in basement entertainment rooms as well. You can choose outdoor-grade accent lighting fixtures to add to the beauty of your patio, deck or outdoor kitchen as well. The light that these installations throw lends a very luxurious and relaxing look to these spaces.