Under-Cabinet LED Lighting Kit is available for purchase that contains a plug-and-play LED light strip, push-button dimmer, remote, 12V power supply, and connection accessories. If you want to build a custom kit, follow the steps below the diagram to ensure that you get everything you need.

3. Select a dimmer or controller

For single-color LED strip light setup

Select the power supply large enough to operate the amount of LED strip light you need to use. If you want to control the brightness of your light strips, you will need a Single-color dimmer shown installed with a non-dimmable power supply

For color-changing LED strip light setup

Follow the instructions above for the single-color light strip setup. However, instead of a dimmer, use a RGB color-changing light strip installation

4. Use an LED amplifier for long runs of strip

Depending on the strip chosen and its maximum run (the number of strips that can be installed consecutively before needing amplifiers), you will need to install an light strip interconnect cables. It is best to purchase a length of strip that is more than your application requires. For example, if your project requires 8 1/2 feet of strip, we recommend purchasing 9 feet of strip to ensure that you have everything covered.

Is it time to update your outlets? This may not be the easiest question to answer! Your outlets are a fairly commonplace thing in your home—usually if they’re not acting up, they’re pretty much ignored. Unfortunately, by the time you get to the place where your outlets are acting up, you could be putting yourself in danger of a serious electrical malfunction or fire.

So what are some signs that you need to update your outlets? Let the experts at Kolb Electric answer!

There are a few sure-fire signs you need new outlets.

Along with these signs, you could need a new outlet for any of the appliances listed below. If your home isn’t wired to appropriately power them, you could experience frequent tripped breakers!