As we enjoy the final days of spring, it is time to prepare for a scorching summer and everything that means. Summer is an excellent time to enjoy evenings outside on the back patio with a cool beverage, your favorite book and a little music. Maybe your summer evenings involve entertaining outdoors. No matter how you envision spending your summer nights or days, you will be happy to know it call all be that much more comfortable with the installation of an outdoor ceiling fan by and electrician in Los Angeles. These fans add elegance as well as provide a cool breeze. Your friendly electricians at The Electric Connection are here to help you get the most out of your summer.

Ceiling fans indoors have proven their value time and again. Their cousin, the outdoor fan, is often overlooked, but it is just as useful and provides plenty of benefits when placed over a patio, deck or in an outdoor room. As with an indoor fan, the outdoor fans provide a quiet breeze that helps break up the stifling heat. There is another bonus the fans provide—they are an excellent bug deterrent. Flying insects like mosquitoes, gnats and even bees can make your time outdoors unpleasant. With the breeze created by the fan, the bugs will be less likely to invade your space.

An electrician will need to complete the installation of your outdoor fan. Electrical wiring will need to be run outside and along a wall or deck material to the junction box where the fan will be installed. Because of this, you will need to have an electrician familiar with the intricacies of the Los Angeles electrical codes. You will also rest easy knowing the fan was installed correctly and safely by an experienced electrician. If you are ready to make your outdoor summer nights more enjoyable with an outdoor fan, give The Electric Connection a call today.

There are many projects you can take on yourself, or hire a general handyman to do, in your home. However, your commercial space or business is a whole different story. When you need work done there, you run the risk of creating a business interruption, which could be detrimental to your bottom line. Therefore, it’s essential that you only trust a professional for your commercial electrical work—no matter what the job is.

You may have a general handyman for your commercial space, or perhaps you have a local electrician you trust for your residential projects. However, what you may not have in either of these scenarios is an electrician with extensive experience and training in the commercial space. This is just one of many reasons you should make sure to hire a professional commercial electrician. Keep reading for more.

The equipment and skill involved in commercial electrical jobs will range depending on the type of commercial space we’re working on—whether it’s a restaurant or an industrial office space. No matter what your needs, however, we can handle them. Trusting electricians who are specifically trained in the commercial space is far more cost-effective than trusting any electrician off the street.

Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Selecting the best electrical service professionals isn’t always an easy task. There are many available, and it can be challenging to narrow your search down to the best candidates. You might feel pressure to make a decision quickly, but doing your homework is highly recommended. Hiring the wrong electrical expert can lead to lots of frustration, as well as wasted time and money. Be sure to ask the important questions before deciding on a hire.

Even if they come with a big discount, you never want to work with electrical professionals who aren’t licensed and insured. Taking this measure will ensure your hire has proper training for the job and you won’t find yourself stuck with substandard results. Insurance is necessary as well since accidents are not always avoidable. Unforeseen damages can easily occur on the job site, and if your electrical experts aren’t insured, you could be stuck with the stress — not to mention extra costs.

It might not be enough to have a licensed and insured professional. They still might not have experience with your particular situation. Find out if they’ve dealt with jobs like yours before, and if they can offer insight that might help you finish things ahead of schedule and under budget. If they specialize in a particular area, be sure it’s related to the job you need! If it’s a big project, make sure they’ve worked on large scale contracts before adding them to your team. You don’t want your electrical professionals to get in over their heads while on the job.

It’s a bonus if the work performed is under warranty, as there is no telling what might happen down the line. If issues arise after work is complete, having electrical service professionals you can call on to address the problem is of critical importance. Beyond giving you valuable peace of mind, this can help ensure the work meets standards of safety and quality. When you consider how dangerous electrical work can be, this becomes even more important.

Electrical service professionals should be reliable enough to let you focus on other aspects of the job while they work. Seek a company that has extensive experience serving customers in your area and a proven track record for success. You can tell a lot about a company by reading online reviews and testimonials from other customers. In addition to that, any reputable electrical contractor should be open to answering any questions you may have.

The world of lighting, LED specifically, can get overwhelming for those that are not directly in the space. From lumens, to watts, efficacy, and more; jargon and terms aren’t doing you any good if you don’t know what they mean.

Not only is it just about LED terms, but also general concepts, facts, and methods of LED lighting technology and the fundamentals that are important to understand to use LED to it’s fullest potential.

In this post, we’ve gather the 7+ “must read” LED lighting articles you should read if you want to understand LED lighting a bit more and be much better off when you dive into the industry and technology. Whether you are a facility manager, electrical contractor, or building owner; all of these articles we’ve gathered will certainly give some value and we hope you enjoy them all