When you're in the market for a new house, every little detail counts. If you overlook an important flaw, you could be in for major repair or overhaul bills in your would-be dream home. Fortunately, you can avoid unexpected costs with some savvy when it comes to choosing your home inspector. Your house is likely the biggest investment you’ll ever make, so it's worth paying for a quality inspector to ensure that a home's systems are in good shape before committing to buy.

An Expensive Proposition

Even when a house's interior and exterior look great, there could be problems lurking within the walls. The HVAC, electrical and plumbing systems are invisible to the average consumer, but they play an essential role in your quality of living – not to mention your pocketbook.

There could be problems with sewer lines, decaying ducts or outdated electrical products like knob-and-tube wiring – issues that could cost tens of thousands of dollars to remedy. A home inspector is your best friend when it comes to rooting out these hidden costs.

Insist on the Best

You don't want to rely on just anyone when it comes to something this important, so follow these tips to make sure you get the most from your home inspector:

To Buy or not to Buy

When an inspection turns up major problems, you can bring them to the seller and ask them to do the repair work, or at least cover part of the cost. Or, if an issue is serious enough, you could walk away from the sale altogether.

Once you take the plunge and make the purchase, don't forget to call an expert home services professional to make follow-up inspections every few years so you can spot any future problems before they develop.

The second the lights go out, there tends to be a moment of panic in the house. Although it isn’t dangerous, if it is in the evening or dark outside, total darkness can be a little unnerving, especially when there are children around. Everything pretty much comes to a grinding halt and there is typically complete silence. The soothing sounds like the hum of the refrigerator or the television being on are zapped away. Although it may be a welcome break from a fast paced world, life must carry on and you probably have some things to get done that require light or electricity. Your Glendale electrician has a solution to the aftermath of a power outage. At The Electric Connection, you will find electricians who are qualified to install standby generators.

A standby generator will make sure you are never left sitting in complete darkness for more than a few seconds. When an electrician installs the generator, a switch will be installed that automatically transfers the home’s power needs to the generator. This switch to backup power takes seconds. You will not have to do anything and won’t need to worry about fumbling around outside in inclement weather trying to get the generator started or hooked up. Everything is taken care of by your electrician. Glendale homeowners can rest easy knowing the lights and pertinent appliance will be back up and running in no time.

Standby generators range in size depending on how big your home is and how much power you need. Some folks opt to do without things like the air conditioner and dryer during a power outage in order to conserve power and direct it to other things like lights, refrigerators and entertainment equipment. It is totally up to you. If you have decided to add a backup generator, give The Electric Connection a call today and schedule your appointment.

The electrical system in a home is incredibly complex, and it can fall prey to a number of different repair needs. Although it’s tempting to try to fix what may seem like “little” electric problems using a few tools like a pair of pliers and electricians’ tape, you should avoid this “do-it-yourself” temptation at all costs. The power coursing through the circuits in your home could cause high voltage shocks and or lead to electrical fires. Only entrust the repair work to licensed electricians from a reliable contractor.

Pay close attention to any signs in your house that there are electrical repair needs: flickering lights, power surges, sparking light switches, acrid burning smells, etc. Turn off the power and immediately call for licensed electricians; you never want to risk injury or a fire.

Any business knows that productivity is key to growth, let alone staying afloat. Whether you are talking about a production line, a traveling salesperson, and yes even your office space; productivity is going to be the main driving factor which will allow your business to not only stay in business, but also experience growth year over year, month over month.

Here we are going to describe 23 ways to improve office productivity which will in turn allow you to realize higher profits, more output, and less money being wasted to lost productivity.

First on the list? Improving office productivity through computer applications:

Science proves that taking more breaks allows us to be more productive.

How does that work if we technically will have less “work time” by taking all these breaks?

It gives us time to collect our thoughts, time to let our mind roam, and even some time to talk and bounce ideas off of others.

So, instead of making employees hate working because you limit them to one break a day; let them take a short one every hour or two and watch the ideas and productivity outputs increase!

Not only should you be organizing your desk, but also the entire office.

A cleared out area allows for a clear mind to work at much higher levels of clarity. Whether you have a cubical office design or a more open concept; requiring all areas of the office to be clear on either a weekly or daily basis should be a must.

Sure, not everyone likes to clear. But, if you give employees 10-15 minutes to clean their area at the end of every day I’m sure most people will be happy to do so (especially if you explain it is part of your initiative to improve productivity in the office)!

Some people have a habit of checking their email every 10 minutes while they are waiting for someone important to get back to them.

In reality, the likelihood of them replying back right away even if you get back to them quick is slim. On top of that, it seems down right desperate.

By implementing 2-3 time periods (again, depending on the department) that people should check their email; you will end the constant refreshing of email pages by a lot of your work force. This allows people to get back to work and pay much more attention to their work at hand.

There can be multiple things wrong with your lighting system that might be throwing off people in the office.

First of all, if you have fluorescent lights then you might just have a few (or a lot) of lights in your office that flicker or even worse, buzz. This can cause eye stress, annoyance, and a general distraction.

On top of that, you may have either an under-lit or over-lit office. Both are bad, and it’s up to you to find the optimal light output for your office. This can be done by surveying employees on your lighting system and going from there.

Lastly, low quality light can be an issue. An easy way to not only improve the quality of light but also get rid of flickering and buzzing light issues is by upgrading your reduce your energy usage by up to 30% or so. Sounds like a win-win situation here!

Not only will they help with productivity, but they will also clean the air of toxins which will keep the air fresh and not-so-stuffy.

Stop making it so difficult to get around. Make it easy to get to the bathroom, to the trash, or even to an outlet.

Time is money, and if people are having to spend time just to get to the most basic things you aren’t setting up your office for success (literally).

Using office design to increase productivity can be difficult, sure. But it doesn’t have to be all that complex. You could even get some people together to brainstorm what could be done to best optimize the space you have to best serve efficiency in the office. So while there will never be the “best office design for productivity” hack or tip (due to all offices being different), you can always use some general guidelines and common sense to help you out.

Wherever the noise may be coming from, while it may not effect everyone it may be effecting some people.

Now, this can be an easy fix if the noise is coming from within the office. To solve this issue, all you need to do is address the area of concern and fix it. But, what if the noise is coming externally on a frequent basis?

Well, you can do either of two things. Firstly, you can try to address or confront the external noise producer and see if there is anyway for it to stop at least during your time of work. If that doesn’t work, then you might need to install sound proofing technology into your walls. This can get pricey sure, but you’ve got to weight the benefits of having less noise in the office versus the cost it is going to be to make the upgrade.

Although you might think that you won’t be able to get everything in if you shorten meetings, you would be mistaken!

In fact, having shorter meetings make them much more focused and thus; more productive. Even if you have two meetings over one a week because they are shorter, it is much better to have two 10 minute meetings over one 30 minute one that lacks purpose.

On top of that, do you really need to have a meeting? Or, are you just holding meetings to “have a meeting?” If it is the latter, try scheduling meetings only when they are needed, rather just out of habit.

Looking for ways to motivate the office into getting stuff done? 43Folders.com and it’s a simple concept: work for ten minutes, break for 2, then repeat this 5 times (or an hour).

You might say, “are you mad?! No way I’ll let my employees take a break every 10 minutes.” But here it out…

Maybe you shouldn’t implement this tactic specifically, but make a variation that works for your needs but still allows for productivity to be most optimal. And yes, there will be times when extreme concentration is required for more than 10-20 minutes, and obviously this doesn’t have to be a “set in stone” type deal. Instead, make it a generally accepted practice to partake in such method of break and work balancing.

(We already talked about more breaks in #3, but we thought this hack was worthy of its own).

Have you ever listed a job listing opportunity with one of the qualifications as “multitasking?” If so, you’ve got it all wrong. In fact, you should be listing a qualifications as “the ability to be laser focused on one thing at a time.”

Multitasking Parkinson’s law” in short says that we will fill whatever time is allotted to complete a given task.

Why do you think people with a 3 month deadline to get a presentation done still find themselves struggling to get it ready to go last minute? Because they will fill the entire time they are given to finish it. This goes with any task, and if you shorten the time allotted to finish tasks you will see more getting done because people will work to fill the allotted time given.

This of course can be used too far and not given enough time to get things done with all the proper due diligence required. Finding a good balance of long enough but not TOO long will be difficult, but start looking into deadlines and what exactly defines how far out they get set and start thinking about setting shorter (yet still doable) deadlines.

Studies show that standing will not only improve health, but it will also improve productivity. Focus goes up and thus more work can get done.

call center workers showed that pollution in the office reduced productivity levels. As you can imagine, pollution is a major issue in a lot of places, especially in bigger cities.