Almost everything that we use on a daily basis operates on electricity. Every modern convenience that we have become used to relies on this fundamental utility. Without having a constant and reliable supply of this incredible technology, the world as we know it would grind to a screeching halt. In order to provide this powerful utility to our devices, two different forms of electricity have arisen: AC and DC.

AC means alternating current. This is the type of electricity that is used most frequently in devices that require a lot of power to operate. DC means Direct Current. It is most frequently found in devices that do not require a large amount of electricity to operate.

What’s The Difference?

DC was the original form of electricity that was generated by Thomas Edison. This form of electricity will send its current in a single direction only. This forms a direct loop. In most cases, DC current is only used in devices that use batteries. This means that any device that you have in your home that uses batteries operates on a DC system. When we charge these batteries, they transform the AC current from your wall into DC current.

AC power is the most common type of electricity, and is the form that your electrician in Burbank works with most frequently. The way that alternating current has been designed, it can move in both directions at the same time. This means that current will be present at every single point on the grid at any given time. If you use electricity from the power grid, then you plug into AC current every single day.

While you may not always think about it, having this reliable AC current is paramount to our everyday lives. For any further questions, or for help with any electrical issues that you have, don’t hesitate to get in touch with a technician at The Electric Connection. We also have a variety of additional resources available in our website at www.theelectricconnection.com.

Improving your home energy efficiency is a worthy and admirable goal. You can help reduce your impact on the environment while saving money with savvy decision making. However, the up-front investment for some efficiency upgrades is substantial, so always do your due diligence before you find electrician services and commit to buy. Read on to clear up some misconceptions about home efficiency and make sure your money is being put to good use.

You Don't Have to Sacrifice Your Comfort: It's true that the best way to conserve energy is to use less of it with strategies like turning off the lights or keeping the temperature lower in the winter. But that doesn't mean you have to sit shivering in the dark. The key to efficiency is to get the same amount of utility for less energy input. That means replacing old incandescent bulbs with LED versions, or investing in better HVAC technology like a smart thermostat. That way, you can keep your home environment tuned to your comfort while reducing consumption at the same time.

Don't Rush into a Big Ticket Item: The most dramatic way you can upgrade your efficiency is with a brand new heating or cooling system. Equipment efficiency has improved drastically in recent years, and new technologies like geothermal heat pumps, biomass boilers and solar panels can all reduce your bills dramatically. However, they aren't risk free. You’ll often face a significant up-front investment when you find electrician services for these installations, and the actual savings that you will realize can vary widely based on factors like the price of fuel. You could also see a loss if you make a big purchase and decide to sell your home soon after; there’s no guarantee you’ll recoup the cost in the selling price.

That's not to say you should avoid large efficiency investments – just look before your leap. You will get the best return from these items if you already need to replace outdated equipment anyway, and if you plan to stay in your home for many years. To reduce some of the upfront costs, you can also look for federal tax credits that refund up to one third of what you spend, as well as options to lease solar panels so you don't have to put any money down at all.

Don't Forget the Insulation: On the other side of the coin, new HVAC technologies won't do you much good if all that treated air just leaks into the outdoors. One of the biggest ways you can improve your efficiency is by plugging leaks and upgrading your insulation, which is typically a much cheaper fix. With a leak detector, some caulk and spray foam insulation, you can seal up your house with minimal investment, saving you money in the short term as well as preparing the house to get greater efficiency out of newer technologies.

For more straight shooting about how to get the most value for your efficiency investments, find an electrician to conduct an energy audit on your house. Your local Mister Sparky® is always available to help!

The power goes off and on at random times and often when you least expect it. When it happens, it is a minor nuisance that requires you to reset clocks and turn back on whatever appliance you are using. You don’t typically think of that few seconds of the power going off and then going right back on as serious. It is. Those little power outages are killing the life of your appliances and damaging your sensitive electronics. Every time the power flickers or surges, anything that is plugged in is basically getting a jolt. An electrician in Los Angeles wants you to save your electronics and appliances by investing surge protection. The team at The Electric Connection can get your home protected in just a few short hours.

Every day, little surges of electricity are sent through the lines and into your home. You may hear your refrigerator compressor kick on when nobody has left the door open or your lights may get suddenly brighter or dim. These are all signs of a power surge explains an electrician. Los Angeles homeowners may notice these things happen if they run more than a couple appliances at a time or when something like the AC unit kicks on. The electricity is pulled from the other appliances and electronics to run the AC, which is a lot like cutting off the supply. This makes everything else, including the AC, work a little harder and not run quite as it should. This is what causes the damage.

The fix is to have a whole house surge protector installed at the electric panel by a Los Angeles electrician. This will control the electrical flow and prevent those surges from happening. If the power goes out and comes right back on, the surge protector will prevent any one appliance from getting a jolt of electricity that may fry the board. Give The Electric Connection a call today and schedule your surge protection installation.

There are some jobs out there that you can very well do all on your own. But there are others that need the guidance and experience of a certified electrician in Gaithersburg. Considering a renovation or remodel for your home and not sure what you’ll need an expert for? Follow along with the team at Kolb Electric to find out!

It can be tempting to try your hand at electrical work, particularly if you think a job is simple. But at Kolb, our team would really, really recommend that you almost never attempt electrical work on your own.

Why? Primarily because of safety. It can be very easy to get an injury when doing electrical work, even for a professional. But also because a lot of work requires certain certification for the job to be within electrical code, which is a legal matter you don’t want to be on the wrong side of.

Here are our top “this needs an expert” picks:

Planning on doing a remodel and need the experience and skill of a certified electrician in Gaithersburg? We’re the team for you! Our experts are top-class when it comes to comprehensive electrical service, and we’re always happy to help. Contact us today to find out more about our services, or to plan your remodel with our electrical professionals!