Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

The next time you call your local residential electrician to come fix any electrical problems you have in your home, you may want to ask him or her about outdoor lighting. According to the American Lighting Association, exterior lighting can not only enhance the beauty of a home,  it can also provide safety and security. Here are some things to keep in mind if you're considering installing outdoor lighting.

Call a professional

Electrical work can be tricky and dangerous. Don't embark on a lighting project without the help of a professional. Ask a qualified electrician to do an assessment of your home at night. An expert will be able to pinpoint the darkest spots around your home and explain how you should light them.

Focus on the front door

One place you'll want to install outdoor lighting is your front door. Not only will this help you and your family at night, it will also allow you to clearly see anyone who rings your bell in the evening.

Illuminate your walkway

Consider illuminating the path leading up to the door to protect your guests (or family) from tripping as they walk to and from your home in the evening.

Get a timer

Talk to your electrician about having a timer installed to control your outdoor lights. This will ensure that if you come home late from work, your lights will be on and waiting for you. You can also use a timer to turn the lights on and off to give the impression of an occupied home when you’re away on vacation.

Consider lights in the pool

If you own a pool, talk to an electrician about installing lights inside it. This will help keep your loved ones safe during nighttime swims. Also, if you have a fountain, you may want to illuminate it as well to better show it off during the evening.

Light up your deck

Lighting your deck or porch will extend the hours you can spend there and create another option for entertaining guests.