Recent data from the National Association of Realtors (NAR) suggests that the United States is entering a sellers market, and that homeowners are, for the first time in years, starting to face fierce competition for their properties upon entering the market. According to the NAR, home prices jumped more from the fourth quarter of 2011 to the same period in 2012 than they had over any year since the onset of the Great Recession. This has been fueled by a shrinking housing market, as shoppers are less apprehensive about making a big purchase and new home construction has yet to catch up to sales volume.

Homeowners who had been considering a move should look into selling their house now while the market is in their favor. Before doing so, however, residents should do all they can to make sure that their property is in the best possible shape before putting it on the market, and should start off by looking into a Maryland electrical repair service like John C. Flood to inspect if their house is up to code. By taking these steps before a prospective buyer calls a home inspector, you will be sure that no surprises come about that may give a buyer reason to lower their offer.

Warm weather and clear skies means it is finally barbeque season once again! May is National Barbeque Month, and we are definitely in the festive spirit. But before you get ready to fire up the grill and bust out the pool rafts, make electrical safety a priority. It might be time for an outdoor outlet upgrade to keep your parties running smoothly this summer.

So just what do you need when it comes to outdoor electrical outlets? Make certain to have ground fault circuit interrupters (GFCIs) installed outdoors for your outlets to protect from serious electrical problems. It’s also always a good idea to have additional outlets installed if possible, especially if find yourself running extension cords across your deck that have become a safety hazard.

Don’t overlook the manual warning of certain appliances that say “not for outdoor use.” It’s always safer to double-check before running into a problem later on. Make sure that electrical appliances are unplugged and turned off when not in use or left unattended.

Just like your outlets and appliances, extension cords need to be rated for outdoor use when you are using them in your backyard. If you must have extension cords running across your backyard during a barbeque, make sure to keep it out of the walkway and away from where children will be playing.

If a rainstorm begins while you’re working as a master chef outside on your electric grill, don’t be a hero for the burgers. Stay safe and head into the kitchen with a backup plan to avoid the risk of electric shock.

Don’t kick off barbeque season without getting pools and spas inspected by an electrician who can make sure you’re backyard is safe and ready for the summer. This is also a good time to make sure you know where electrical circuits and breakers are in case of an emergency.

If you need any help making your backyard barbeque-ready, our professionals can make your electrical renovations and fix-ups a breeze.

Property owners have a responsibility to their tenants to keep a house or apartment in good working order. This includes the electrical portion of the home. Property owners or property management companies have to be on call 24 hours a day to handle any emergency. And because of that, you need an electrician in Glendale who is also ready to take your call anytime, day or night. At The Electric Connection, we understand that need and make sure there is always somebody to take your call. During business hours, a live person will answer the phone and after hours, there is an on call service number available.

It is crucial to any property owner they have a company they can rely on to take care of every electrical problem, whether it is big or small. It is also very important a person can rely on an electrician to make the best call to fix a problem. In most cases, the property owner will not be on the premises when the electrician goes out to investigate a Glendale electrical situation. Because the property owner, not the tenant, will have the final say in what repairs are made, it is very important there be an open line of communication between the electrician and the management company or the owner. If an electrician realizes a diagnosis of a problem may take several hours, it should be communicated up front before any work commences.

There is also the sensitive nature of telling a tenant too much about the situation. Of course some information is necessary, but ultimately, it is up to the owner or manager to choose how much a renter knows. You will want to make sure you hire a company who employs electricians that are friendly to tenants, without divulging too much information. If you are in need of a company to service your rental properties, give The Electric Connection a call today.

Demand for the electric cars has been on upward trend over the last few years. However, manufacturers and car owners still face a challenge due to the limited battery capacity which necessitates the need to keep on recharging after traveling a certain distance.

Despite the benefits of charging the electric cars at home, most residential installations, especially the older ones, may not support the systems. But the consumers can upgrade these to accommodate the additional load. The upgrade depends on the existing wiring, panel, capacity and charging station power requirements.

electrical wiring and capacity, and the charger voltage and level. The electric car owner must first decide on the preferred type of charger and time, and then compare its power requirements with the existing capacity at home.

Some chargers require 120V while others work on 240V and each takes different times to fully charge the batteries.  Higher voltages will require dedicated circuits and upgraded wiring, breakers, panel and service entrance.

Other upgrades include the price plan, metering, and compatible outlets or provision for hard-wiring. If you are installing a DC charging is very fast; it uses about 400-volt direct current and is capable of reaching full charge in about 15 minutes. This is a complicated method and may require significant upgrades in the home electrical system. It is also very expensive and rarely used for home charging.

upgrade your wiring or install the product if you system capacity can support it.

It is essential to ensure that the electrical panel and dedicated circuit have the capacity to handle the system. The installation of the charging station is similar to other high power equipment, such as clothes dryer, and should comply with all the electrical codes and requirements.

Each charging station should be on its own dedicated circuit with adequate capacity and protection. However, the it can still be connected to an existing 40 Amp circuit, such as the one for the kitchen, provided that there is a locking mechanism to ensure that only one load is connected at a time.

Charge stations may be hardwired or plug-equipped to connect to the electrical outlet. For the plug type charger, you will need to have an electrician to wire the compatible electrical receptacle according to the codes.

You may add ventilation to improve the cooling of the charge station if it is in a location with poor air circulation.

Charging electric cars at home is the desire of the majority of EV owners. It cuts down on the cost and time to drive and wait at a public charge station. In addition, it does not interfere with the daily activities of the electric car owners since they can charge at night.

Unfortunately, there are several homes without the provision or capacity to support the charging stations. However, the EV owners can consult the car dealers, and then engage qualified electricians in upgrading the existing electrical wiring. This will enable them to conveniently charge at home.

Once someone has discovered retrofitting as a read that by clicking here.

Let’s get started with the first question on the list, and that is what exactly is a retrofit kit?

What is a retrofit kit anyways? Well, we’ve actually reducing your energy consumption even more. Just make sure you are buying a LED retrofit kit that has the option to be dimmable, otherwise you will NOT be able to dim them.

Retrofit vs full replacement, why should you consider retrofitting with LED?

While a full replacement of an entire is fixture is very valid to do especially when they are outdated or literally falling apart; often times you can avoid that by retrofitting your fixtures. With retrofitting you get to keep your old fixture but just replace the light source in it with a new one. This will allow you to reduce the costs associated with the lighting upgrade tremendously, which will allow you to realize a much larger ROI.

Although there are benefits of both, you need to think about your facility or buildings own situation, and go from there. To recap; retrofitting is great if you can keep your old fixtures but if you can’t (due to reasons like outdated or near falling apart), then a full replacement is probably the better option.

For more info, check out this infographic (

Why should I even switch to LED in the first place?

Very good question, and this not only applies to those retrofitting but for any facility that plans to make a lighting system update. LED technology has vast benefits in almost every area of the definition “quality” for commercial lighting purposes. Here are just a few of the major benefits that more often than not win over businesses to commit to the conversion over to LED technology:

As you can see these are all some pretty big benefits, and that’s only the start. These reasons are why many companies are making the conversion over to LED products from other outdated technologies such as metal halide, HPS, and even fluorescent. Why not convert to LED with a retrofit LED kit and realize all of these benefits and more? It just makes sense!

Is it difficult to retrofit an existing light fixture?

Well, that can depend. To someone who has no knowledge about lighting fixtures and electrical wiring, then yes this will seem like an extremely difficult task. On the other hand for someone who is a professional, this isn’t a difficult task at all.

The process, in theory, is simple because all it consists of (for the most part) is a replacement of all the existing lamps, ballasts, sockets, and brackets with new ones to fit your retrofit kits. If you have no experience doing this, and even if you do, it is always recommended to bring in a licensed electrician if you can to ensure it is done right and to safety standards.

Are LED retrofits that are compatible with existing ballasts a good idea?

You need to consider the age of the ballast that is currently installed. In most cases, it will be nearing the end of it’s life and thus it won’t be the most up-to-date ballast that you could have. This adds for an additional point of failure, which could cost you more down the line in maintenance fees to replace them when they die out.

You have to consider that since you are considering the switch over to LEDs through retrofitting, you most likely haven’t recently upgraded you lighting system or replaced much. This means that the ballasts currently installed are most likely, at best, as old as the lights in your fixtures currently. But more often or not, they are even older than that which can definitely mean they are nearing the end of their lifespan.

Taking this all into account, it’s impossible to tell you if using existing ballasts is a contact us. We will gladly answer any question you may have!