What is Radiant Floor Heating and what are the advantages of it?? We get asked that often.

Radiant floor heating is the best heating system a house can have and one that you don’t realize it is there! Just imagine: no radiators clanking in the night and no vents whooshing like a jet preparing for take off!! No dust – collecting ductwork that runs up your allergist”s bills. That’s the advantage of radiant floor heating. It is an even blanket of heat, right where you want it. It’s also a highly efficient way to heat a house, increasing comfort as it reduces energy costs.

This is how radiant heat works – In a radiant setup, the warmth is supplied by hot-water tubes or electric wires buried underneath the floor. As the invisible waves of thermal radiation rise from below, they warm up any objects they strike, which radiate that captured heat in turn. Though the air temperature remains relatively constant, you stay comfortable because the surrounding surfaces aren’t stealing warmth from your body.

Contrast that with what happens in a conventional forced-air heating system, the kind found in most homes. Air blows out of the registers at a well-baked 120 degrees, rises to the top of the room where it quickly sheds heat, then drops back down as it cools. The air in the room becomes uncomfortably stratified: Your head can be bathed in warmth while your toes lie in the frozen zone. Then there’s the problem of cycling. “You turn on the furnace, it quickly takes you to 68 or 70, and then shuts off. The result is a phenomenon he calls “the cold 70,” which is what you feel right after the hot air stops pumping from the registers. Those jarring ups and downs are absent with radiant floors, which may reach 85 degrees, tops, on a frigid day. The warm air still rises, but it does so evenly over the entire floor, so the coolest air stays up at the ceiling.

As you walk around your house trying to find ways to save a few dollars here and there on your electric bill, you may be overlooking the obvious. Your current light bulbs. You have probably seen the more expensive light bulbs in the spiral shape in the stores but may have passed over them in favor of the less expensive bulbs. Your electrician in Glendale is here to tell you, you may be costing yourself more money by choosing those cheaper bulbs.

The experienced professionals at The Electric Connection can answer any questions you have about energy savings. One of the easiest things you can do is to start changing out your current halogen bulbs for the more energy efficient Compact Florescent Bulbs or what are simply referred to as CFLs. A CFL uses 75 percent less energy than the old standard bulbs.

Your light usage in your home probably accounts for maybe $20 on an average $100 monthly electric bill. So, if you replace each of your current energy hogging bulbs with CFLs, you could potentially safe about $15 on your electric bill. While that is not a massive amount of savings, it will certainly add up. Don’t be fooled by the word florescent. There is no eerie yellow or green glow. They are available in a variety of colors depending on your preference. If you have more questions, you can ask your electrician. Glendale residents may also want to consider replacing outdated lighting fixtures with more modern energy efficient fixtures.

This is a job for a certified electrician. While there, the electrician can install dimmer switches on lights that do not need to be at full power all of the time. These dimmers give you the freedom to have just a little light or a lot, depending on what your needs are. Call The Electric Connection today to learn more about dimmer switches and how they can help you.

Great outdoor lighting provides your home entryway with a welcoming and luxuriant presentation, ensuring just the right level of illumination for the safety and security of visitors and guests. 

Now is the time to assess your property and invest in a custom outdoor lighting design to increase your home’s curb appeal and provide a luminous finish to your home entrance.

New innovations include outdoor post lamps, decorative lanterns and energy-efficient pathway lighting.

To make your nighttime outdoor environment as comfortable, safe, and maintenance-free as possible, great lighting is key.

1.  SECURITY LIGHTING FOR WALKWAYS AND DRIVEWAYS.

Outdoor post lamps and path lighting help to expand your outdoor environment, providing a tailor-made illumination toward the front door, deck, patio +/or garage.

2. DECORATIVE LIGHTING FOR HOME ENRTY ZONES.

An outdoor hanging lamp and/or wall lanterns add a customized finish and are available in a myriad of styles to complement homes from traditional to ultra modern.

3.  TASK LIGHT BY THE FRONT DOOR AND GARAGE.

Direct focused illumination on key holes and security pads should be bright enough to allow for easy access and visibility when you are entering and leaving your home at night.

4.  ACCENT ILLUMINATION TO HIGHLIGHT HOUSE NUMBERS

Make sure that your home is properly illuminated for guests as well as delivery people and emergency vehicles.  All too often, help is delayed in emergency situations because house numbers are not clearly visible at night and outdoor lighting is insufficient.

5.  “SHIELDED” LAMPS THAT EXPAND OUTDOOR LIVING SPACE AND ACCENTUATE IMPORTANT ARCHITECTURAL FEATURES.

Properly shielded outdoor lighting fixtures expand and beautify your home, without creating glare or causing visual discomfort to visitors and neighbors. A good lighting design with energy-efficient fixtures will increase the value of your property and provide majestic outdoor lighting effects.

LET’S GET STARTED…

*Rule of thumb for sizing outdoor wall lanterns:  The height of the lantern should be based on the height of the door.  If brackets are to be installed on either side of the door, they should measure about one-fourth the height of the door.  If using only one lantern, size up to about one-third the height of the door.

** “Dark Sky” compliancy and light pollution:  Light pollution is any undesirable effect of artificial light, including glare, light trespass and decreased visibility at night.  Many manufacturers offer “Dark Sky” versions of their outdoor lighting products, which “collar” the light bulb around its base to block superfluous upward emissions of light.

-Match outdoor fixture styles to the decor of your interior space.  Whether you go with classic and elegant traditional outdoor lighting or sleek and contemporary, your outdoor post lamps, hanging lamps and wall lighting should complement that style.

-If you have custom designed hardware on doors, find a finish that will work well to complement this detail.

-Don’t neglect the side yard and dark areas by side windows;  Include at least one low-level outdoor lamp for nighttime security.

-Look for finishes and outdoor hanging lanterns, post lamps and flush fixtures that are guaranteed to last.  Check out warranty information on the latest outdoor lighting fixtures; some include a life-time guarantee on all finishes and parts.

-Make sure to view your outdoor lighting after dark before signing off on a project; make necessary adjustments to refine your outdoor lighting design, focusing the light exactly where it is needed for an aesthetically pleasing look and polished illumination for safe navigation and security lighting at night.

Capitol Lighting’s professional lighting consultants will help you in selecting everything from timers and outdoor hanging lamps to path lights and outdoor post lamps.  Work with the experts to prepare your outdoor environment with quality lighting customized to enhance the value of your home.

From traditional outdoor lighting to modern and classic contemporary designs, the right outdoor lamps make a world of difference.  Beautify your home and secure the neighborhood with updated outdoor lighting fixtures to highlight your home with good sense and style.

Top Picks include:

New Traditional Outdoor Lighting from Hinkley Lighting:

“Mendocino” Outdoor Post Lamp from Troy Lighting:

Outdoor Hanging Lamp from Fine Art Lamps:

Dark-Sky Compliant Outdoor Lamps from Minka Lavery:

There are instances where NEC and other regulators recommend dedicated circuits for certain loads. Typical loads to put on individual branch circuits include sensitive electronic equipment such as computers. In addition, water heating systems, large appliances, and other high capacity loads that zap power require a dedicated circuit.

Run cables all the way to the main service panel and avoid connecting to other existing circuits. The same conductor size should be used throughout the branch circuit.

Electric water heaters, HVAC equipment, hot tubs and other appliances should each have a nearby disconnect that is easily visible and accessible. The power disconnect can be provided by the main or sub panel breaker, a dedicated switch, or a power cord that can be unplugged.

The branch circuits should have adequate current carrying capacity, adequate and grounding.

Typical branch currents include: