Regardless of bends, twists, or turns, Example of a cut line on LED strip lights

2. You will now have two LED strip lights. Carefully peel back the end portion of the paper strip covering the strip’s adhesive backing, and then remove the 3M VHB adhesive from the solder pads on the bottom side of one of the strips. The strip with its adhesive peeled back will be the top strip when soldered.

5. Align the non-tinned strip segment (strip with adhesive removed) directly over the newly tinned pads, and apply heat. Hold the soldering iron in place until the solder remelts and begins to flow. To strengthen the bond and improve visual appeal, a small portion of solder can be added to the top pad.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split and solder a run of non-weatherproof two-conductor or connecting wires. Peel away the blue wire so that only the positive (red), negative (black), and control (green) wires are left.

*No wires should be peeled away if you’re joining single-color or standard RGB light strips.

3. Properly heat your soldering iron. For best results, clean and tin the tip of the iron immediately before soldering. To tin the iron, touch solder to both sides of the iron’s tip.

4. Next you will need to tin the solder pads on both ends of the split strip light. When soldering, always apply heat to the target area on the strip and not directly to the solder. Once sufficient heat has been applied to the area, start introducing solder.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split, solder, and reseal a

3. Follow steps two through five located at the top of this post for soldering a standard RGB strip light.

4. To reseal the strip light, apply

The LED strip lights are now connected, and power should flow through the entire length of the weatherproof strip.

Rewiring an old house can seem like a big challenge. Older homes often need comprehensive rewiring especially when their existing wiring no longer meets building codes. Yet, no matter if a home is 50 years old or 150, it’s important to work closely with a licensed electrician throughout this process. A small mistake or a forgotten area of the home could lead to costly mistakes later.

Older homes can be full of electrical hazards. Many times, the need to rewire comes from two areas. First, you need to be sure the home is safe and electrical systems are working as they should. Second, you need to upgrade the home’s existing electrical system to meet modern needs and electrical capacity requirements. That’s not always easy to do.

To upgrade old house wiring, there are several key considerations. This is where you need to start with the help of a licensed electrician. Here’s the process:

• True to form

• Tailored and elegant

• Clean lines and natural hues

• NEW and Exciting!

A burst of crystal, metallic ribbons, streamers and champagne glasses, if this contemporary winner from Corbett Lighting does not set the scene for a good time, you need to find a new playgroup!  Finished in Modern Silver, “Party All Night” from Corbett Lighting is cutting-edge contemporary with the fun and flair of whimsical style.

“Aleeka” from Kichler Lighting is a swirling mix of concentric circles and shaded orbs.  A fascination of motion with a Classic Pewter finish simply and elegantly defines modern-contemporary style.

“Starfire” from Maxim Lighting takes xenon illumination to the next level. Polished Chrome and Beveled Crystal deliver a sparkling exuberance that is exciting and unique.

“Barclay” from Savoy House exudes strength and an edgy, trend-setting style.  The Gilded Bronze finish, mesh drum shade and cascades of  handcrafted chain brilliantly integrate Mediterranean and industrial characteristics.

“Jennings” from Crystorama showcases classic contemporary in an intricately designed metallic shade.  The Polished Nickel geometric cutout is attractively illuminated around the crisp linen drum shade.

“Pearla” from Eurofase combines LED light sources, a polycarbonate diffuser and a hand-polished chrome finish.  Like a strand of fine pearls,  this contemporary whirl of illumination is substantial and opulent.

“Travis” from Hudson Valley presents an ultra glamorous sophistication reminiscent of the “Golden Age” of cinema and Hollywood Regency style.  Sleek and elegant, prisms of cut glass encase candle holders for a fascinating play of illumination.

“Quill” from Hubbardton Forge is a marvel of rectilinear and planar geometry with branching structures and feather-like plumes in a Vintage Platinum finish.  LEDs and infinitely adjustable horizontal or vertical cable offer a fantastic array of hanging options and lighting effects.

“Corfo” from Eurofase offers a playful visual symposium like a crystalline rainfall embedded in Chrome coils.  Decorative light sources emanate a dazzling illumination within this powerful lighting design.

“Flagship” from Access Lighting makes a show-stopping presentation.  Metal panels, robust peripheral light sources and a powerful downlight offer ideal illumination, handsomely designed with timeless, contemporary grandeur.

The Dallas Market

Professional lighting consultants from Capitol Lighting have meticulously reviewed hundreds of showrooms filled with the latest LED innovations, as well as contemporary dining room fixtures, portable lamps, outdoor lights, ceiling fans and chandeliers from elite lighting manufacturers around the world, including top vendors in the US, Europe and Asia.

Add the perfect custom finish to the front of your home with outdoor hanging lanterns and wall lanterns.

When using two outdoor lanterns, they should measure about 1/4 the height of the front door(s). When you are using only one lanterns, 1/3 of your door height is appropriate.

Outdoor hanging lanterns should be centered over your front door(s), high enough so that the doors may open and close freely. If you have a picture window or archway above the front door, center the fixture so that it may be seen from inside your home.

Wall lanterns surrounding the front doors should be proportional to your home, when in doubt, size up! Remember, fixtures appear smaller from curbside viewing than most people would imagine.

Wall lanterns are also appropriate for rear and side entrances and by garage doors – same rule of thumb for sizing applies for these areas.

Path Lighting should be placed 6′ apart to ensure adequate beam spread.

Be sure to make your space functional! Task lighting is an important piece of the design; it will provide guidance and illumination in the necessary areas to ensure safety.

Focused illumination on key holes and security pads allows for easy access when you are entering and leaving your home at night. Outdoor LED wall lights or recessed spotlights work well in these areas.

Add path lighting to walkways every 6’ to provide adequate beam spread. This will create curb appeal ambiance and visibility when walking at night. Don’t forget to add light near the house numbers – this can help in emergency situations and for deliveries!

After the sun goes down be sure your home has the same curb appeal as it does during the daytime by adding outdoor and uplighting to the landscape.

Illuminating trees or other elements from below will create soft focal points in the landscaping after the sun goes down. Use a flashlight to test where you’d like the light to hit, then mount the fixtures accordingly. Be sure to mount fixtures out of grass for ease of mowing and other landscaping tasks.

Be sure to view your outdoor lighting after dark before signing off on a project; it’s easy to make necessary adjustments to refine your outdoor lighting design.

To avoid being “that neighbor”, be sure to eliminate glare and make sure your outdoor light fixtures do not create “light trespass” into your neighbor’s property.