We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

ballast-compatible LED T8 tube for office lighting, school lighting, hospital lighting, basement lighting, and more. The energy-efficient F32T8 tube light can be used in direct-wire fixtures or to replace T8 tubes in fluorescent fixtures without removing ballasts. Designed to last 50,000 hours—5 times longer than fluorescent tubes—the LED T8 tube reduces costly repairs, disposal fees, and the need for replacements. This energy-efficient LED light uses just 18 watts of power and is comparable to a 32-watt fluorescent tube light.

Juggling the seemingly endless myriad of accessories, appliances and tools that have become commonplace in modern homes can sure be a hassle. Many homeowners find themselves routinely swapping plugs, or using devices like a power strip. While these can suffice in many situations, and offer a (relatively) effective solution, many make the mistake of relying on a power strip too much.

The only thing Kolb Electric takes more seriously than perfect service is safety! We don’t want to see you caught up in an electrical emergency, and to make sure you don’t we’ve built a short list of power strip safety tips. We also have some alternative, and overall superior, suggestions as well!

When deciding to use a power strip, keep these points in mind:

As we said, power strips are fine. In moderation, and as long as you observe proper power strip safety. But there’s a better solution! You aren’t simply stuck with however many outlets are currently installed in your home. Additional outlets can provide a safe, dependable and long-term solution to your electricity needs! The process is quick and simple in the hands of a professional, and will have you set to handle all of our modern lifestyles.

No matter what you require for your home, the experts at Kolb can provide the electrical access you need! We’ve been handling electricity, wiring and appliances for years, providing our consumers with only the absolute best in service, skill and technology. Contact Kolb today to learn more about our services, or to set an appointment!