Restriction of Hazardous Substances (RoHS): RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Warranties

Super Bright LEDs, Inc. offers a minimum 2-year warranty to protect against manufacturer defects and malfunctions. Longer warranties are available depending on the product. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair, or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

Read more

Lifetime Warranty

Super Bright LEDs, Inc. offers a Lifetime Warranty on a variety of products to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.

Read more

CE: Meets European health, safety, and environmental standards

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

UL Recognized: Product component safety and environmental certification from Underwriters Laboratories (UL) LLC

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

DLC: Listed as a quality, energy-efficient product by the DesignLights® Consortium (DLC®)

The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC’s Qualified Products List. For more information, click

DOT Approved: Approved by the Department of Transportation (DOT)

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.

SAE International Class 1: Classified for use as emergency vehicle lighting by the Society of Automotive Engineers (SAE)

Vehicle warning lights are ranked by the Society of Automotive Engineers (SAE) according to class. A Class 1 LED light delivers the most amount of light (in comparison to class 2 and class 3 lights) and is ideal for emergency lighting on ambulances and fire trucks as well as police and rescue vehicles.

ETL Listed: An ETL-Listed product meets national safety standards

A product that bears an ETL-Listed label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

FCC: Complies with Federal Communications Commission (FCC) rules. Won’t cause harmful interference.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won’t cause interference with other electronic devices. According to FCC’s website, “The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories.” Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC’s guidelines and limits and do not cause harmful interference.

SAA: Standards Australia (SA) compliance

Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

IP65

The weatherproof product allows zero entry of dust. It is protected against jets of water and may allow limited liquid entry.

IP66

The weatherproof product allows zero entry of dust. It is protected against strong jets of water and may allow limited liquid entry.

IP67

The waterproof product allows zero entry of dust. It is protected against the effects of immersion between 15 centimeters and 1 meter.

IP68

The waterproof product allows zero entry of dust. It is protected against long periods of immersion under pressure.

IP69K

The waterproof product allows zero entry of dust. It is protected against high-temperature, high-pressure water and steam.

UL 844: Meets requirements from Underwriters Laboratories (UL) LLC for use in hazardous (classified) locations

UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:

These requirements cover luminaires for use only under the following atmospheric conditions:

With the start of the school year and the holiday season approaching, it seems as though the mound of expenses just keep piling up. You’re budgeting for school shopping, lunches, holiday shopping and making sure your lights stay turned on. This season tends to be the most expensive for many home owners.

Luckily, we have a few ideas on how to cut back on utility bills and lower your electric bill. We also provide home inspections for everyone in the Northern Virginia area and look at ways you can utilize the most out of your electrical appliances. You may be heading into a time filled with many expenses but you can pad your pocket with money saved from lowering your utility bill. Check out these tips that will help you with your utility bills and give you peace of mind during this hectic season!

Install Dimmer Switches

When you install dimmer switches, you can use only as much light as you need. With a traditional light switch, the only settings are on and off, meaning you are either using 0% electricity or 100%. With a dimmer, you have an entire spectrum of settings in between. Being able to decrease the amount of light you use inevitably results in lower energy bills. Install dimmers in the rooms you use the most like the kitchen, living room, bathrooms, and bedrooms; this will allow you to take advantage of the greatest savings possible.

Keep Your Fridge and Freezer Full

Everyone always tells you to keep the fridge closed. But did you know that keeping your fridge and freezer full can also save money? Food acts as insulation and lessens the amount of time that the fridge has to run to stay cool. This will be easy to do with all of those lunches your family will have to pack for school and for the Thanksgiving and Christmas holidays.

Install Ceiling Fans

Keep the air circulating in your home, and your air conditioner won’t have to work as hard. Ceiling fans can help lower your electric bill by up to 30 to 40 percent. While a ceiling fan doesn’t actually decrease the temperature of a room, the draft makes the room feel cooler – allowing you to raise the thermostat and be just as comfortable. You can even use your ceiling fans in the winter months! Many people are unaware that ceiling fans can be used to circulate warm air during cooler months of the year. By running the blades clockwise, ceiling fans push warm air down from the ceiling without creating a draft.

Get Rid of “Phantom Loads”

A shocking 75 percent of the energy used by home electronics is consumed when they’re turned off. These “phantom” users include: televisions, videogame consoles, stereos, computers and many kitchen appliances—basically anything that holds a time or other settings. A simple solution? Plug all of these items into power strips; then, get in the habit of turning off the strips between uses.  This will cut back on utility bills and will help combat overloading fuses.

Switch to LEDs

LED light bulbs use 90 percent less energy than incandescent bulbs. Switch out the most widely used bulbs in your home. Then, replace the rest as they burn out. LED lights tend to last much longer than traditional bulbs so you won’t have to replace them as often – saving you money.

Building a home is a great way to ensure you are getting exactly what you want out of your house. It really makes you feel as if you have been a part of the process from the ground up. It gives you the chance to create a home that suits your needs and reflects your personality. Many homeowners have discovered it is often much more economical to build a home than buy a home that needs various remodels and adjustments. It also makes it possible to buy the perfect home in the neighborhood you have had your eye on. To build your new home, you will need a Beverly Hills electrician like those at The Electric Connection.

When you build your own home, you will get to decide the number of rooms you have as well as bathrooms. Another major benefit to building your home is the thrill of designing your kitchen to work from you. Every person will have different desires and needs when they are in the kitchen. Some people need numerous outlets to run several appliances. Large families may need more than one microwave to keep the family going. All of these things require the expertise of an electrician. Beverly Hills homeowners who want to add more outlets than the standard 4 or 5 in the kitchen, can discuss their needs with the electrician. The electrician will go about wiring the outlets and ensuring the breaker can run all of the outlets without becoming overloaded.

Your electrician will also take care of installing ceiling fans, installing light fixtures and running any data and phone lines for you during the building phase. This can save you a lot of time by getting it done during the building process instead of waiting until after the walls are up. Give The Electric Connection a call today and schedule your new home construction consultation.