Solar panels have numerous benefits. It is important to do research and understand how solar panels provide energy for your home. Understanding the process will allow you the benefit of realizing how unique and cost effective solar energy can truly be.

Since the sun’s light contains energy, when the rays hit an object, the energy emitted turns into heat. This is similar to feeling the warmth of the sun on your face. However, when it hits certain materials, instead of turning into heat, it turns into power that can be harnessed as an electrical current.

When using solar panels made up of these materials, your home can be powered by solar energy, while using your current electrical wiring to run it throughout your home. You also can stay on with your electrical company, so that when cloud covers and bad weather roll in, you will not notice any difference in your home’s power.

Now, since there is also the option of leasing solar panels, the cost of solar panels has decreased somewhat. One of the biggest setbacks for most people, in the past, have been the cost, but with the option to install solar panels by leasing them, combined with a significantly lowered electricity bill,  they have been able to be much more affordable.

There is also the benefit of using an energy source that doesn’t pollute like the current fossil fuels being used. The sun has an ample supply of energy, and a small percentage of one second of its energy being enough to power the entire world.

With so many benefits and understanding how the energy is transferred into power, you will be better equipped to make the decision to switch over to solar in your own home or business. If you have more questions, check out The Electric Connection’s website and blogs for more information about solar power information and solar panel installers.

Owning commercial property comes with a wealth of responsibilities. It is up to the commercial property owner, for example, to ensure that the heating and cooling systems in their properties function properly so that everybody therein is comfortable throughout the year. The successful operation of the electrical system in any such property is also integral, and the failure to ensure the proper operation of an electrical system can not only drive up energy costs and result in serious inconvenience: it can also lead to unsafe situations. That is why you must hire a commercial electrician in Newton, MA for any commercial electrical services that you may need completed. If you encounter any such service needs, FB Electrical Services is here to guarantee that any necessary work is done right.

One of the main reasons that commercial property owners contact their commercial electricians is to have new equipment installed in their properties. It is important to remember that, handy as one may be, the installation of any sort of electrical equipment is something that only a trained, experienced professional can handle. There are far too many factors and variables to consider when installing any such equipment to entrust such a service to a novice or an amateur. It is vital that equipment of the appropriate power is used, and that it is wired into your electrical system with the utmost care. Otherwise, a service that is meant to be beneficial, such as the installation of a commercial ceiling fan, can result in reduced efficiency, the overloading of circuits, and other issues. Plus, it is possible that the installation process itself may damage your property if not handled by a qualified part.

Another reason to contact a professional Contact FB Electrical Services.

So you are facility manager for a school, and you have been asked to replace old stadium lights for the football field, upgrade your stadium lights, LED has three basic advantages: reduction in energy consumed, reduced maintenance cost and a better quality of light.

LED vastly improves the quality of your sport fields and arenas. Not only do they create a higher standard in your facility, but they reduce the costs you are spending to light your areas on the back end as well. After the 3 solid reasons it’s time to upgrade to LED in your sports arena, I think you are well on your way to making the right and solidly informed decision when it comes down to purchasing your upgraded system.

If you’re dying to install your new instructions for how to install a light bar. These instructions include options for installations with or without a wire harness and for connecting to existing LED lights. Installation will vary based on the type of vehicle, existing lighting setup, and chosen wiring method, but these instructions can serve to give you a general idea of the process. Light bar mounting instructions are also available and are listed by WH-DTS10, WWH-DTD30; (ATP) WH-ATPD20, sdoptional mounting brackets; be sure not to overtighten the hardware (you will need to adjust it in step 7).

3. Route the lighting side of the wiring harness from the battery to the light in a safe, secure manner. Connect the harness to the light. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wiring harness is a safe path to follow. Some lights may not have DT or ATP connections on them, but the connectors can be added from the harness kit or purchased separately (ATP-FPT).

4. Continue to route the switch portion of the harness to the desired location of the switch. The switch may need to be unplugged from the harness to make routing of the harness easier. An optional remote-controlled switch (RS-x) are also available with different legends.

5. Connect the black (ground) wire with the large ring terminal from the harness to the negative battery terminal. Connect the red (power) wire with the large ring terminal from the harness to the positive battery terminal.

6. Secure the relay to a suitable location, and test the light to make sure the circuit works.

7. Finally, aim the light in the desired direction, and tighten all mounting hardware.

3. Connect the black ground wire of the new light to the ground wire of the old light with solder and heat shrink tubing (PSC-x). Connect the red power wire of the new light to the power wire of the old light.

4. If the new LED work light or off-road light bar has an ATP or DT connector that you wish to utilize, corresponding ATP (DT-MPT) pigtails are available.

5. Finally, aim the lights in the proper direction, and tighten all mounting hardware.

1. Find a suitable mounting location that will allow for running wires and mounting the LED light bar. Mark where your holes will be for the light bar brackets or mounting feet. Check behind drilling locations to ensure nothing will be damaged. Drill appropriate-sized holes.

2. Mount the lights with the provided hardware or with DT-MPT or RRS-SP, RRS-SPx, or RCS-RF25A) under your hood to speed up install time and avoid routing wires through your vehicle’s firewall. Route another run of red wire from the pigtail adapter (connected to the light) to the output terminal of the switch. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wire harness is a safe path to follow.

4. Be sure to double-check for all obstructions and proper clearance. Drill an appropriate sized hole for the switch, and mount it.

5. Connect your black wire to the negative battery terminal. Connect your red wire to the switch input terminal and to the positive battery terminal with an appropriate-sized fuse holder (MAF-x) installed within 18 inches of the battery. You will have to cut your section of red wire to allow for the fuse holder to be installed between the switch and battery. Connect your other run of red wire to the switch output terminal.

6. Finally, aim the lights in the proper direction and tighten all mounting hardware.