It is estimated that thousands of electric shock accidents take place each year, of which some are fatal ones. Aside from this, there are incidents of electrical fires caused by poorly-installed or ill-maintained wiring. It’s important to understand that most of these fires and accidents are avoidable. There are some simple things you can do to prevent an electrical fire from erupting on your property, including:

Never try to force plugs into the outlets and don’t remove the third prong which is the grounding pin, to fit it a plug into an outlet with 2 prongs. Do not plug in too many appliances into a multi-plug outlet.

Check whether there are any loose-fitting plugs as these can be a fire/shock hazard. If you notice that any of the wall plates are broken/missing, replace them without delay. So that the components and wiring aren’t exposed. If you have very young kids in your home, make sure that you cover all used outlets.

Check the cords for fraying or cracks. Pay special attention to ones that are placed in any high traffic areas or under rugs and carpets.

Make sure that the wattage of the bulbs is compatible with the fixture requirements. If you find any bulbs with a higher-than-recommended wattage rating, replace them immediately. It’s also important to ensure they don’t overheat and that they are screwed-in securely.

These should never be used on a permanent basis. Use ones that have safety enclosures to protect kids from burn injuries and shock.

There should be GFCIs installed in the kitchen, bathrooms, garage, basement and various other indoor and outdoor outlets in your home. Test these on a monthly basis to ensure they are working as required.

Only older properties have fuse boxes and these don’t have the capacity to withstand the heavy electrical loads required by modern-day equipment and appliances. It’s far better to get these older systems evaluated by a skilled electrician and replace them with modern circuit breakers.

Faulty or old wiring is one of the commonest causes of residential electrical fires in Australia. Get these checked periodically for loose connections, loose wall fixtures or wall receptacles. If you hear any hissing, sizzling or popping sounds behind walls or from sockets, call in your local electrician without delay to get these installations inspected and replaced. If you find that any switches or electrical fixtures are hot to the touch, get those checked as well. Flickering light bulbs are another indication of problems in the electrical wiring as well and it’s best to get a thorough check conducted.

If you find that a specific circuit breaker trips repeatedly, or you experience shock when you touch it, you should unplug it immediately and get it replaced or repaired. Check for damage or cracks in the connectors and wiring and install surge protectors to protect all your expensive electronics.

When you upgrade your home, make additions or add extensions like extra rooms or an extra storey etc., or even add a large number of new equipment or electrical appliances to your home, that can overburden the existing electrical installations. At this point you would have to increase the service capacity of your home’s electrical system.

We are a company that has been operating in this space for a number of years and have the skill, knowledge as well as the resources to install, maintain and upgrade all types of electrical installations on your residential or commercial premises. For more information, contact the Allround Electrical team at this number – 1300 169 263. Alternatively, you can write to us at our email address.

Thanks for reading,1300 169 263

With all the bad weather we have been hammered with this winter, our electric power stations have been maxed out trying to keep up with the demand for electricity.  With the cold, another problem has been water pipes freezing at the electric generating stations causing them to have to shut down for repairs.  Long story short, over 55 million people in America this year have dealt with power shortages.  Either being rolling blackouts, or simply no power for days.  I have received multiple inquiries from customers wanting to know if there is an alternative means to keeping the electricity on in their home without using a gas-powered generator.  Their reasons for not being able to use a gas powered generator ranged from “I live in a HOA where generators are not allowed on the outside of our home and I can’t put it on the inside due to noise and fumes,” to “I don’t have any place outside to put the generator that guarantees it won’t be tampered with or stolen.”  Some of my customers that live in condos or town homes only have a balcony which really “limits them on space.”

You use it every day, but do you really understand electricity? It’s important, because, without understanding electricity, it’s hard to maintain electrical safety in your home. In order to understand electricity, you basically need to grasp five key concepts; we like to call them the five hidden mysteries of electricity.

Many people have heard about power factor correction, but aren’t too sure about exactly what it means, or is. Here is some basic information about it, in very simple words. Power factor is essentially a measurement of the effectiveness with which your commercial business uses the energy that’s supplied to your location.

In an industrial setting, you are able to reduce the amount you pay as a power bill, by cutting down the power factor surcharges that show up on various electricity accounts; these show up as the peak demand charges from your power company. This is exactly the reason why there is such a huge growth in power factor correction.

Currently, many businesses are being charged via a kVA tariff, rather than a kilowatt one. This also means there is a distinct possibility that your electricity service provider is charging you for power they are supplying to you and which you aren’t really using. In short, you end up paying for power that’s going waste. The other considerations:

Every industrial setup has different power requirements, different types of equipment and tools that run on electricity; and it’s important that you connect with a company that is able to understand your requirements and provides custom solutions. Once they help set up the right kind of power correction equipment, you can benefit in a number of ways.

As a business owner, you know you want to reduce operational costs and while you are sure to have a number of other measures in place, understanding how power factor correction will help you, is one way of making a significant change. For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of power factor installation solutions. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263