A common concern for those involved in home renovations or purchasing a new home is, “What is the state of the electrical system in the walls”. Some homes may not have had construction or renovations done since the original – this means the original wiring is still in place. Having original wiring in place can be concerning, especially if it is aluminum wiring. This type of wiring is commonly found in older homes and can be very dangerous. Read on to find out what you need to know about aluminum wiring and the dangers associated with it.

In the 1950’s to 1970’s, many homes were being outfitted with aluminum wiring. The reason for this was because the prices of copper (material normally used for electrical wires) had increased and the use of aluminum would undercut the high costs. Aluminum is also much more conductive than copper and was used in larger industrial/commercial electrical lines like power grids and airplanes.

Despite the reduced cost and increased conductivity, aluminum wiring has many potential issues. Aluminum wiring is much softer than standard copper wiring. This means that it is vulnerable to being broken, cut, and damaged which can leave live electrical wires exposed. Another issue is that when aluminum rusts, it is not as conductive as copper. Copper that rusts can remain conductive and continue its flow of power. However with aluminum wiring, rust in wiring will impede the flow of electricity and can cause a number of other issues. Aluminum also expands and contracts when it becomes hot. This constant flux in size will result in the wires loosening themselves and connections become loose. For all of the above listed reasons, aluminum is prone to overheating and electrical fires.

If you are unsure if there is aluminum wiring in your home, we have listed a number of warning signs that can indicate a hidden problem

Lighting is an extremely important aspect of setting up a good home office. Because this is the area of your house where you'll be performing the most work, it needs to be lit in such a way that it facilitates concentration and reading, rather than making these tasks more difficult. It may seem like a basic consideration, but with a little more thought and insight you can get more out of this space than you normally would.

A lot of home improvement blogs will recommend putting your office in a place that gets lots of natural light. While this is certainly ideal if you're working on art projects or anything else that involves reading or looking at things on paper, the glare from daylight can make a computer screen virtually unreadable. It may be better in such circumstances to rely more on artificial light, with a few windows thrown in when you don't need to use your computer.

So what kind of lights should you use? It's a good question. Most people will settle for a desk lamp or lights that were built into the room when they moved in. Both of these options represent compromises, however. Desk lamps take up valuable space and make your work area look cluttered, and the built-in lights may not be ideally placed for your home office.

Depending on the size of the warehouse we are discussing; the energy costs related to the lighting withing and even outside the warehouse can vary. But no matter what size, shape, or capacity a warehouse operation runs out of they all have one thing in common and that’s lighting expenses.

This is a common struggle for facility managers: trying to save money with the money that they have. And upgrading or investing in a new lighting system although can save money and produce a positive ROI overtime; can cause troubles considering it costs money upfront.

This post is here to identify the main points and benefits of a good lighting technology (LED), how it can improve a warehouse or factory facility, and how you can actually cut the upfront investment costs down significantly to make the investment even more-so worthwhile.

Improve safety through a better lighting system. In almost every aspect of the word quality; LED is the winner, especially in industrial applications. Firstly, if you’ve ever (or are currently) experiencing an issue with flickering or buzzing lights inside or out of your facility: you most like have metal halide or HPS fixtures in place. With LED they will never flicker or buzz not even near the ending of their lifespan.

Secondly, if you are experiencing an issue with dim lights just a few years after you’ve installed your MH or HPS light sources; you are experiencing a negative side effect of having these technologies. They are susceptible to higher lumen depreciation at a much faster rate than LED products do. Don’t get it wrong though, LED products still do safely and securely.

Decrease lighting bill costs. Did you know that you are burning up energy that you don’t really have to be burning up? It’s true, technologies such as metal halide are literally eating up 50% more energy than you would be with LED products installed. If you could reduce your lighting bill costs by 50% or more, what benefits could you see? For starters it would improve your bottom line. Otherwise, if you are proud to be a green company this could be just another way to further that mission and prove you are doing everything is takes to cut down on waste as much as possible. The list could go on but the main benefit that makes almost every person want to make the switch to LED is the 50% or more reduction in lighting costs month to month.

More Ways to Decrease Your Lighting Costs

Here we list a few ways that you can actually decrease your investment cost on a new LED lighting system in your DesignLights Consortium is, in basic terms, your rebate will more likely be better than just DLC standard.

Longer bulb life = Less Maintenance. LED technology is know to last 2-3 or even 4 times longer than other light sources out there. By upgrading to an LED system in your warehouse you are reducing the amount of times you need to pay someone to replace your burnt out lights. This can get especially pricey since most warehouses have high bay lighting which is typically high in the air. If you have 30, 40, or 50+ lights this can get very expensive for a warehouse facility. By opting in for a longer life light source (such as LED) you are going to reduce your maintenance costs dramatically (by 2-3 times).

Some Common Questions

Here are some very common questions that we are asked regarding lighting for a warehouse:

What exactly are the lighting fixtures used in warehouses and factories?

While an office in a warehouse will use the same lighting as any other office would (panels and tubes), the main floor and area of the warehouse is what we are talking about.

Typically people install high ceiling spaces.

What is a retrofit? And should I retrofit?