The holidays are a time of celebrating and spending time with family. They also tend to be a time when fires in the home increase due to improper use of lights and holiday décor. It is important you keep your home safe this season and follow proper lighting safety, especially when lighting up your tree. There are many people who prefer the traditional live Christmas tree. If you are one of those people, you need to take a few steps to ensure your holiday decoration does not become a fire hazard. An electrician in Los Angeles has some important safety guidelines to keep in mind when decorating your real tree this year. If you have any more questions, you can always call the team at The Electric Connection.

1-Keep your tree hydrated by ensuring there is plenty of water in the bowl. You may need to add one to two gallons a day when you first get it home.

2-Check your tree daily to determine if it is dry. Your Los Angeles electrician advises against lighting up a tree that is excessively dry. Brown needles or needles that fall to the ground when they are gently touched are a big indicator the tree is dry as tinder and the smallest heat source could spark a fire.

3-Extension cords are pretty common during the holiday season. You need extra outlets to light up the tree and any other décor you have set out. However, extension cords can be dangerous if they are not used correctly. Never overload a cord. If you are in need of additional outlets, call your electrician. Los Angeles homeowners will love the freedom a few extra wall outlets adds all year round.

4-Keep your tree away from heat sources like a space heater, woodstove or even the heater vent. The heat will dry out your tree much faster and can ultimately spark a fire. Do what you can to block the vent if you have to put your tree next to a vent.

Stay safe this season and give The Electric Connection a call if you need any new outlets installed to ease your holiday lighting.

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.