With the kind of Maryland weather we’ve been having this month, you’d think we live in a subtropical climate! And while steady rain can be relaxing and good for those of us who raise a garden, it can pose some risks as well. What risks? Well, there’s always the usual dangers of a storm, but what we specifically want to cover is water damaged wiring.

The certified electricians at Kolb Electric take your safety and the safety of your home seriously, so if you’re at risk for damaged wiring, we want you to know what to do! Suspect you may have water damaged wiring in your home or business? Contact Kolb today!

You hear us going on and on about the dangers of electrical equipment, but we do this for a reason. It only takes a split-second mistake and zap; you’re in some serious trouble! Left alone, water-damaged electrical wiring can:

If and only if you have had submerged wires that have since dried out, and these wires have been totally shut off (at the breaker in the electrical panel) you may be able to utilize heavy-duty work gloves to move the wires. WE DO NOT RECOMMEND THIS. Only do this if leaving the wire poses an immediate risk that must be resolved. Otherwise, just let the experts do it. Never take chances that may harm you or someone else.

Having trouble with your wiring after the downpours we’ve been dealing with here in Maryland? Contact the specialists at Kolb to get the repair and replacement you need!

If you want to achieve flexibility of loading different electrical appliances in your home, implement the following approaches. The electrical conduits practices recommended here meet NEC guidelines guaranteeing proper load growth for both commercial and residential buildings.

If you expect the load on your house, office, establishments, or other buildings to increase in future, consider using at least 12 AWG conductors. Ensure that they have protection of 20-amp circuit breakers and are designed with a 15-amp load standard each.

In addition, consider implementing these measures on wires and cables to increase the optimal performance of your circuit conductors.

To allow the normal length of lamp cords and other wire cables, the NEC Code recommends more than six feet of distance between the point on a wall and an appliance receptacle. In applications such as kitchen countertops, electricians should wire receptacle outlets some twelve feet or four feet apart.

The biggest challenge here is the difficulty in predicting how items such as furniture in your house will be arranged. Additionally, there may be an inadequate number of outlets at various locations. Evidence for this can be seen in the outlet power strips that today’s equipment use.

In locations where you can expect a huge load, such as computer workstations, offices, and home entertainment, the use of Quadruplex receptacles is an ideal solution. Reducing the number of receptacles that a single circuit uses will limit the installation and use of sensitive equipment. It also positively affects circuit conductors, voltage drop, chance of interaction, and reduces the likelihood of harmonics accumulating to harmful levels.

If your home has a large kitchen and multiple bathrooms, you need additional circuits that go beyond the minimums of the NEC Code. This effectively maintains the high-capacity appliances that characterize these rooms.

In addition, limit the number of use receptacles per circuit. For example, a 15-amp circuit can run 1800 Volt Amps when working at 100 per cent rate. While NEC recommends using circuits at 80 per cent rate, this translates to 1440 Volt Amps.

For some reasons, NEC requires a high number of circuits for use in most commercial and residential buildings. The Code recommends that sensitive electrical appliances, high-capacity loads, and equipment that cause poor quality of power obtain power from individual circuits. This separation eliminates the interference with equipment on a common circuit.

Where individual branch circuits are installed, the harmonicas generated in other circuits are shielded from coming in contact with sensitive equipment. In addition, this prevents the high neutral currents from sensitive electronic appliances to those circuits, effectively eliminating the likelihood of incorrect operation and voltage drop.

Raceways provide the ease of upgrading conductors efficiently and give electricians the freedom to pull conductors through a building. Therefore, let spare raceways and safety electrical material is installed during construction to allow an easy installation of conductors in the future.

As appliances and equipment advance over time, the lighting and switching mechanisms in your house or building should anticipate future modifications. For example, motion detectors and other electronic lighting devices require a small standby current to remain in their optimal state.

Therefore, install the following solutions for safety switches and lighting appliances right from building construction.

These applications are necessary if you want to reduce the load on the circuits in your house. If you have not implemented them yet, call a reputable electrician today to overhaul the electrical conduits. While this protects the electrical wiring from possible hazards, it also safeguards the assets in your house or building.

Your smoke detector is arguably the most essential safety fixture in your home. However, a National Fire Protection Association (NFPA) report found that at least 5 million homes in the U.S. still don’t have smoke alarms. According to the NFPA, having a working smoke alarm cuts one’s chances of dying in a reported fire in half. But since most of us are so accustomed to this appliance, it becomes easy to take it for granted and remember how important it is to our security.

Obviously, your smoke alarm’s primary function is to notify you of any suspicious smoke inside your house. This includes anything from burnt cooking, improperly extinguished cigarettes/cigars (actually among one of the most common causes of fire), and electrical fires. Your alarm will sound at the first sign of trouble, hopefully notifying you of the fire before flames can spread to other parts of the house. Likewise, many electrical fires first take shape as a spark followed by smoldering wires. Your alarm will be able to give you some warning before the fire gets out of control, protecting you and your family.

To optimize your safety in the event of a fire, we recommend taking the following steps:

If you need assistance with your smoke alarm or would like to schedule a home electrical safety inspection, contact Bryant Electric Service today. We are one of the most trusted electricians in Austin, TX and are happy to answer your questions!

Using a warm white or RGB COB (chips-on-board) LED, these flood lights emit up to 1,000 lumens of illumination in a wide 120-degree beam pattern. The weatherproof LED fixtures have a low-profile die cast aluminum housing with an integral heat sink and a tempered glass lens. An adjustable mounting bracket is also included to direct illumination where it’s needed.