When it comes to step lights, there are several light sources to consider. infographic you can use to brush up your light bulb identification and selection skills. If you want to see how LED compares to other common light sources, use the infographic as you choose your step lights. Knowing what light source you prefer will make your decision easier.

2. Type of Installation

Generators make an important line of defense against natural disasters and power outages. With a generator, you don’t have to worry about keeping the food in your refrigerator cold, or powering your heating system when the temperatures drop. When installing a new generator, it’s important to select one that is the right size for your home. By size, we mean the power it’s capable of creating, not the physical size (though that can enter into the equation depending on where you plan to put it). In Lynnwood WA, electrical repair services can often advise you on how to size the right generator for your home, but it pays to know the basic before you give them a call.

The first step is to perform an energy audit for your home, determining how much power each appliance or electrical device uses, and then prioritizing them for use during an emergency. Medical devices usually come first on the list, followed by refrigerators and freezers which store your food. Next is your home HVAC system, followed by the lights in your home. Computers, radios and entertainment systems are usually on the bottom of the list: useful for keeping connected with the outside world, but otherwise non-essential in an emergency.

Once you have that list, you can determine two things: how much power is required to run your whole house and how much power is required to run the bare essentials during an emergency. The former number is preferable and if you can afford a generator of that size, then you should probably purchase it. The latter is less ideal but can do in a pinch if you’re on a budget and still want to keep your household running when the power goes out. In that case you need to carefully monitor which appliances are hooked up to the generator so you don’t overload it when the time comes.

Homes that were built more than 10 to 20 years ago are likely not equipped with the much safer grounded-fault circuit interrupter outlets in the kitchen and bathroom areas. GFCI outlets are ideal for use in areas where there is potential for an appliance to be exposed to water. Everybody knows water and electricity don’t mix. But, we need our gadgets and just try to be extra careful. Unfortunately, accidents happen. A Los Angeles electrician, like those at The Electric Connection, can help you protect not only yourself, but your family members from suffering serious injury when one of those little accidents happen.

The difference between the standard outlet and the GFCI outlets is the safety feature that cuts power to the appliance the second there is an interruption in the flow of electricity from the outlet to the appliance. The breaker will be tripped if the circuit does not flow along the correct path and is interrupted by your body for example. This protects you from suffering an electric shock. If you accidentally drop the blow dryer into the sink while the water is running, it could be an extremely dicey situation if the dryer is plugged into one of the old-style outlets. Power will continue to run to the dryer until the water shorts it out. You would risk receiving an electric shock if you tried to grab the blow dryer out of the sink while the electricity is still flowing.

If you would like to protect your family from these kinds of accidents, call an electrician. Los Angeles homeowners can have current outlets in the kitchen and bathrooms replaced with GFCI outlets without a lot of hassle. These outlets are great for anywhere in the house and can also prevent shock from wires that have been damaged by rodents chewing through or that have been ran over by the vacuum. Give The Electric Connection a call today and schedule your outlet upgrade.

If you are doing work on your yard over the weekend, you can now get away with doing everything using only electricity. Lawnmowers, pressure washers, and other tools that commonly used gas can now be purchased in models powered by electricity. If you are using these electrical powered tools you need to ensure that you have electrical coverage around your home to plug them in. Here are some tips for having outdoor GFCI outlets installed in your home’s exterior.

Most homes come standard with a couple of outdoors outlets. Sometimes this is not enough and you will be restricted because the cable for your lawnmower or pressure washer can’t reach around the side of the home or to the back of your yard. When preparing to have an outdoor GFCI outlet installed, measure the length of your cables and the maximum distance you will need to go. You can then create the radius of coverage you will need and pin point the correct locations for the outlets. If you do not choose the optimal location you could end up installing more outlets then you need and will have to unplug during tasks to move outlets. This is inconvenient, so lets do it efficiently!

With a ground fault circuit interrupter (GFCI), the outlet can detect if there a problem in the circuit such as contact with water or a person, and then the circuit will shut off. This is especially important outside, as the outlet is more susceptible to water, from rain and snow, car washing, and interaction from animals and children. It is also wise to have covers installed overtop of the outlet as well. This adds an extra layer of protection. The covers will need to be manually opened by yourself before use and prevent unwanted interaction.

As we usually recommend, double check that your existing wires and circuits can handle the additional outlets. The tools and equipment that make use of these outlets can demand a lot of power and if the outlet is installed on circuit that is already heavily loaded, you will be experiencing trips and electrical hazards to your home. An Expert Electrician will be able to identify the proper circuits to have the outlets installed on.

Using electricity offers convenience and efficiency. Make the most of it and be safe by having a professional, certified electrician install outdoor GFCI outlets on your home.

You walk into your home and see the same things every day. You may see some dirty dishes in the sink or maybe notice you could use a little dusting in the living room. You look at the things that are right in front of you. You probably don’t actively look for things in the home that are hidden, but dangerous. It is important you spend a few minutes looking for and identifying any potential fire hazards in your home that may have gone unnoticed in the past. Having the help of an experienced electrician in Beverly Hills is a good idea. You can rely on the team at The Electric Connection to help you identify and repair any potential danger.

This is a list of 3 of the most common hazards that are lurking in your home.

1-Asbestos use was popular in home construction up until the mid 1970s. There are homes that still have this dangerous substance working in the insulation of attics, basements and in the walls. If you don’t know what asbestos looks like, it is always best to hire a professional to complete an inspection.

2-Faulty smoke detectors are another common issue. Many people adopt an out of sight, out of mind habit and forget the smoke detectors are even there. A Beverly Hills electrician can help eliminate that issue by installing hard-wired smoke detectors that rely on your home’s main electric panel.

3-Electric panels are another area of concern that should be inspected by an electrician. Beverly Hills homeowners may not even be aware their existing electric panel is on a list of recalls. There were numerous panels produced and installed throughout the 1980s and 1990s that have been proven to be dangerous and should be replaced.

If you suspect your home may have one of these hazards, it is a good idea to have an inspection completed by an electrician or an asbestos abatement company. Give The Electric Connection a call today and make sure your home isn’t hiding an electrical hazard.