How to choose LED lamps. The replacement of lamps in an existing lighting system is connected to a lot of doubts when concerning the replacement of the lamp type. Changing the lamp type is a conventional process. The invention of the CFL lamp in the 90’s allowed users to save energy by replacing their energy consuming incandescent lamps. A lot of labels and graphics on the products packages show the replacing types. There are numerous possible influences on a lighting solution. Changing the lamp is changing the most important factor, the lighting quality. Lamps define the light color, color rendering index, luminous flux (light output or brightness) and installed load.

Changing lamps is nothing else than comparing the features of the old system, characteristics like light color, color rendering index and luminous flux should stay the same, suggested the former illumination has been satisfying. Watch the luminous flux (measured in lumen) and compare them to the already installed one and choose an appropriate lamp. Here is an example which luminous flux (lumens are abbreviated by lm) can be replaced by which lamps:

Don’t get confused by all the lighting features from the labels or packages. Concentrate on the characteristics like light color and color rendering index, they should be the same or at least similar. Choose the lamp according to luminous flux in lumens. Be confident when choosing (LED) lamps. They are efficient and offer twice till three times longer service times Metal Halide light sources.

Hot tub wiring and circuits are a big request this time of year.  Summer specials such as those going on at the Iowa State Fair dramatically increase sales.  With many hot tub brands to choose from such as Hot Springs Spas, Maax Spas, California Cooperage, Jacuzzi, Caldera Spas, and Thermo Spas the choices are numerous.  Hot tub installers typically do not wire your hot tub unless there is a specific and properly wired disconnect in place.  The hot tub circuit with disconnect must be installed by a licensed electrician.  The hot tub or pool disconnect has certain requirements pertaining to the type and distance required from your pool or hot tub.  In addition to this the circuit must be the required ampacity and voltage intended for your hot tub in order to insure the safe and reliable operation for you and your family.  Never trust someone that is not an electrician trained in proper hot tub wiring.  

Installing the proper hot tub wiring is not a project for that handy family member or the guy down the street.  Hot tub wiring must be done properly and to state and local building codes.  In addition the wiring must be done to strict National Electrical Codes.  All of our electricians that are trained in hot tub wiring follow the code to ensure you and your family are as safe as possible.

Just like hot tub wiring, pool wiring must only be done by a trained and trusted professional.  Pool wiring has strict guidelines set in place for your safety.  Bonding, grounding, and GFCI protection are all major concerns when installing wiring for your pool.  Pool wiring is not a do it yourself project and should only be done by a licensed electrician.  We work with several of Des Moines top pool installers to insure your next pool project is done to the highest of standards.  The code is in place and should be followed closely with no exceptions.

Well, it happened again. The kitchen and bath pros who make up the via www.marketwatch.com

Giant windows are great if possible. That’s a big IF, though. Sometimes, natural light isn’t an option, either because the laundry room is subterranean or otherwise windowless. Obviously, in the image below, natural light is not an option. Yet, the color temperature of the ceiling light is neutral enough to make this laundry room bearable while another, poorer lighting choice could have made this tiny laundry room annoying to visit and kind of scary.

You didn’t think I was going to avoid talking about lighting solutions just because natural light is such a great option for laundry rooms, did you? So, how should you light your laundry room? For any type of laundry room, there are some fundamental guidelines.

I’ve already suggested that you ALWAYS USE NATURAL LIGHT, when and if possible. And for your other light sources? Consider choosing lights with a Color Rendering Index (CRI) of as close to 100 as possible. A light source’s CRI is, in effect, a metric by which to compare the ability of artificial light to render color as well as the sun. 100 is the maximum CRI. Some lamps, like low-pressure sodium lamps, can actually have really low CRIs, while there are now some LED lights with CRIs of 95 – 98. If the sun isn’t shining in your laundry room, there are plenty of excellent options that closely match natural light’s ability to render color and help you keep your clothes clean and fresh as can be.

Layer your lighting.

OK, so this is the main theme in pretty much all lighting design guides. Layering your light pretty much means that you should think about general light, accent lighting, and task lighting. In the main section of a house, this might look like mini recessed ceiling lights with square bronze trim, elegant track lighting to spotlight a painting or picture, and a reading light by the chair or some under cabinet lights illuminating the bar counter. In a laundry room it might look like the image below.

Sometimes, in larger laundry rooms, you can have all three kinds of light. But, generally speaking, laundry areas are on the smaller side and are too focused on pragmatism for decorations that would benefit from accent lighting. Keep in mind that this is a generalization with exceptions galore, but, generally, the two kinds of lighting you’ll find in laundry areas are ambient overhead lighting and task lighting, and this scheme usually takes the form of a ceiling light or two and under cabinet lighting.

Creative Options.

It is almost time to head to the garage or attic or wherever you have stored your lights and other decorations all year. It is exciting to pull out the holiday decorations that signal a time of giving and family. The family loves the work you put into decking the halls and making your home bright and beautiful. However, it is important you are practicing safe decorating tips provided by your electrician in Santa Monica. The team at The Electric Connection wants you to enjoy this holiday season without putting yourself or your home at risk.

Limit the Strands

Don’t get carried away connecting light strands together. You should not connect more than three strands together to plug into a single socket. If you don’t have enough outlets to run all of your decorations, call an electrician. Santa Monica homeowners will love the freedom and flexibility additional outlets give them, especially outside.

Proper Usage

While most lights and decorations are designed to be used inside and out, there are some that specifically note indoors only. Don’t risk putting these outside as they could short out and cause a fire. You can read the box or the tag near the plug to determine whether it is indoor only.

Appropriate Extension Cords

You will likely need to use a couple of extension cords, but you need to make sure they are appropriate for use outdoors. You also want to make sure you are not connecting several cords together. A Santa Monica electrician explains this could be hazardous if water or snow managed to get between the two connections. Buy cords that are long enough to suit your needs so you don’t have to connect them together.

Decorating should be a fun job—not dangerous. If you need outlets or have any additional questions about electric safety when decorating, give The Electric Connection a call today.