Whether you’re doing industrial wiring or residential wiring for electricity, you’ve got a complex task ahead of you. Needless to say, industrial wiring is essentially a much more complex form of residential wiring. This article will assume that you have some elemental electrical wiring knowledge or aptitude, and it will simply provide you with a very basic overview of what you need to understand with regard to residential wiring and industrial wiring.

It will be up to you to look up your local building and electrical codes for your home or office space. Also, check your local laws to see if you are even permitted to do your own amateur wiring before you proceed. Above all things, approach any wiring project with this knowledge at the forefront of your mind: “electricity can be deadly.” Put your safety ahead of all other concerns.

Red wires and black wires are usually “hot”. This means that there is a current (amps) flowing from the circuit breaker to the electrical box or the appliance in question.

The white wires usually are “returns”. This means that they allow current (amps) to flow back to the circuit breaker after the electricity has passed through the load or appliance in question.

White wires should not be connected together with ground wires, with the exception being back at the circuit panel bus bar. If you fail to observe this rule, then every single time the load is energized (such as turning on an appliance), electricity will flow through the ground wire and the return wire simultaneously. This is very dangerous.

A ground wire is usually bare and attaches to an appliance’s frame. Under normal circumstances, current should not be passing through it. Only when there is a short circuit should electricity pass through the ground wire; this happens so that the circuit breaker will kill the flow of current to the site or appliance.

Smart industrial wiring is based on 3-phase electrical power. 3-phase electric allows less workload to be placed on each wire involved while at once allowing them to work together to give you maximum results. With 3-phase electric, the wires are smaller and the motor is smaller than a typical single-phase motor. These factors allow greater efficiency and longer lasting motors and wires.

There are four types of 3-phase electrical power:

No matter which type of 3-phase electrical power you choose to use, you’ll need a voltage meter in order to determine the actual voltages that are available to you. The type does not determine this.

Industrial wiring typically runs through metal conduits, armored cable, or a raceway. These enclosures are the safety ground–never the neutral wire.

The above information should give you a nice guidepost for doing more research into and getting more practice with either residential wiring or industrial wiring. Again, safety comes first!

Are you sick and tired of paying an arm and a leg for your electricity bills? Congress is considering legislation that could bring you some relief. A bill was introduced to the House of Representatives this summer that would update the Title I Home and Property Improvement Loan Program, which helps consumers make efficiency upgrades to their homes. The new bill is intended to help homeowners invest in solar energy to power their home electrical work. Read on to learn more about this legislation and how it can help you.

Upgrading Your Electrical Work

The Title I home loan program has been around since 1934, aimed at helping homeowners with capital for home improvement upgrades. Currently, Title I is working through the Federal Housing Authority's Power Saver program, designed to promote clean energy and fight climate change. Home energy efficiency upgrades like photovoltaic solar panels, therefore, are a natural fit for the program.

The legislation currently in front of Congress, called the “Solar and Water Efficient Homes Act,” would update the Title I guidelines to better accommodate modern technologies, as well as increase the number of loans that are available and reduce the bureaucratic red tape that has bogged down the program in the past.

Bringing the Capital to You

Upgrading your home can require significant costs that are beyond the reach to many low and middle income families, so the Title I program provides capital that allows homeowners to realize energy savings immediately. Those who are eligible can get loans of up to $25,000 to make a variety of efficiency upgrades to their electrical work, most notably by installing solar panels. The program will also help homeowners purchase new HVAC systems, beef up their home insulation, buy new water heaters and even install geothermal heating systems.

“Title I loans have helped hundreds of thousands of homeowners improve their homes,” Rep. Jared Huffman (D-California), one of the bill's sponsors, said in a press release. “It’s time we make it easier for homeowners to invest in energy efficiency upgrades and improve water conservation, creating good local jobs, and helping the environment.” The legislation also hopes to spur job creation by encouraging consumers to spend more money on home services labor and equipment.

Efficiency Arrives at Your Home

When it's time to boost your home efficiency, Title I is there to lend a helping hand – and if Congress passes the Solar and Water Efficient Homes Act, the incentives will be even stronger. If you want to learn more about the Title I loan program, or need any repairs done on your home electrical work, contact a qualified electrician today.

The year of 2017 brings along more advancements in the commercial lighting space. And in a world in which things are changing so rapidly with lighting technology in virtually every way, it can be difficult to get everything you need to know in one place. For this reason, we’ve created this post in hopes of helping you get a rough guideline of the actual stadium lighting costs for the current year, 2017. Along with that, giving you the outlets to research more on the topic and get you one step closer to getting the most efficient and ROI focused technology illuminating your fields.

This post will be broken into two parts; the typical costs associated with the physical light itself and everything related to buying stadium lights. Secondly, the typical costs to powering your lights and how certain technologies may save you more money than others and how you can go about getting the highest return on investment when choosing a lighting technology and brand to go with.

To start off, we are going to cover the technical terminology of stadium lighting.

Firstly, stadium lighting is the simple term for high mast lighting. other technical terms, there are far too many to cover here. But, we think you should know the definition of lumens as we will be using it quite often. To explain, a Click here to view more about the pros and cons of both and which one is better for you.

All in all, it is too variable to give a definitive price to all situations. Keep in mind though, that a comparable LED fixture could cost double but, cut energy consumption by nearly 75% in some cases.

Since we seriously believe LED is the best option for stadiums and sports fields to illuminate their place, we are going to use that as our example (and recommendation).

Let’s keep it simple so you can use our example to get a rough idea what it will cost to run your lights.

Let’s say you have 10 lights. Currently, your high masts are metal halide and use 1,500 watts per fixture. Now, let’s say you are looking for a more efficient technology and you come across LED. You find a comparable light which will output the same amount of light (or lumens), and only consumes 400 watts per fixture.

In total, the metal halide lights are consuming 15,000 watts in total (when in use) and the LEDs would (if chosen) be using only 5,000 watts. That is 3 times less energy, which can lead to some great savings. This reduction from 1,500 watts to 500 watts per fixture is the exact reason fields both small and large fields are converting to LED over other technologies like metal halide and HPS.

For example, we often find that fields that convert to LED with us from metal halide or HPS high mast pole lights realize a payback of their investment in as little as 1 year. Additionally, since LEDs last much longer they get to realize these cost savings for much longer and thus; a much higher ROI over the lifespan of the light.

Additionally, since LEDs last longer they enjoy an additional benefit of less maintenance requirements. This allows more cost savings as an indirect benefit of LED high mast lighting.

Tips for Reducing Costs

We hope this post has answered your questions regarding most sports field lighting costs, if not, either use our contact information above or leave a comment below and a commercial lighting professional will personally reply to your questions and input.