An electrical circuit works as a loop where electricity flows from a source and then returns to that point again after powering the device connected to it. The power flow interrupts or stops if the path is broken. There are also receptacles, fixtures, or switches joined to the course through different types of electrical wiring.

Every electrical circuit has a specific breaker or fuse that controls it. Inside the main electrical panel of your house, you will find reference numbers to identify which breaker or fuse is assigned to which circuit. Mapping of them is a standard electrical safety procedure.

power company supplies electricity to your home through the transmission and distribution lines. The energy enters the service panel, also known as the fuse or breaker box, after passing through a meter. Then, the box has three wires (hot, neutral, and ground featuring insulation of different colors) that do the jobs of transmitting the power to an external outlet, returning to the source, and providing the ground.

The wires of your home are generally installed in three ways:

It’s a wiring system where a single electrical circuit supplies power for several devices. There are various housing boxes from where both hot and neutral wires emerge and run along the route. They branch off to single receptacle and fixture.

It’s the most common of all the systems seen in residential settings.

Switch Wiring

Installed on hot wires, such a system has switches that either transmit or break the current flow to various devices or lighting fixtures. A switch changes its position to allow or interrupt the flow of electricity to electrical machines and instruments.

The system routes the hot wire through various fixtures before joining to the neutral one, which then carries the power to the source. It’s the least used and most inconvenient of all the types because it connects the devices, i.e., lights in a series. So, the circuit breaks off when just one light is burnt out.

Parallel wiring is the best option for household settings because it does not break even when one of the connected fixtures goes kaput. Nevertheless, remember not to run too many electronics from one source because each circuit can carry only a maximum electrical flow.

When it comes to electrical tasks in yousitur home, it’s never a good idea to turn them into a DIY project. Electricity is a very necessary and useful utility, but can be extremely dangerous too and it’s crucial that you call in a certified, skilled and insured electrician to handle the job for you. Look for a professional and reputed company that provides 24/7 services and keep their number easily accessible at all times; this will ensure you get prompt services exactly when you need them. Here we discuss in which situations you should call in an emergency electrician to tackle the job for you:

This is extremely dangerous and you should immediately turn-off the circuit breaker that you feel is connected to that wire. Do not try to repair this yourself as there could be a chance that the circuit breaker you turned off isn’t connected to that particular room wire at all and this exposes you to the risk of electrocution.

This is a situation you shouldn’t take lightly at all. It’s important that you keep all your family members and pets away from that room and switch off the circuit breaker you think is connected to that wiring line. If you have any water pooling, puddling or accumulated (as in a flood situation), call in a skilled electrician to check all the wiring and address the problem without delay, as this is a major electrocution risk.

It’s not often that a home will lose power completely, while there is no similar problem in the neighbourhood. However, if the power does go out only in your home, quickly check with your neighbours and check whether the street lights have also lost power. If everything seems to be alright there, you may have a major electrical problem on your hands.

In all these situations, do not try to find out what the problem is; call in a licensed, local electrician to inspect the wiring and other electrical fittings and fix the problem. The point we are trying to make here is that if you in any way feel that an electrical installation or appliance is unsafe, call in an electrician without delay.

The one way to reduce the chances of an electrical problem from occurring is to get regular electrical maintenance done. The company you hire for the job will send out skilled professionals at pre-decided schedules to conduct a thorough check on the wiring. In case any potential problems are noticed, you will be informed about them and they will be addressed without delay. This reduces the chances of major electrical problems surfacing out of the blue.

We at Allround Electricals will check the system carefully and check it for any other potential faults as well. For more information, contact our friendly team at this number – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

At the Super Bowl this Sunday, almost a third of the nation watched as a power surge caused the big game to come to a halt at the beginning of the third quarter. While the Mercedes Benz Super Dome sat only half lit for almost 40 minutes of what would be one of the most exhilarating Super Bowls of all time, millions wondered how the organizers of the game could allow such a mishap to occur.

A power surge is when a burst of electricity floods a circuit or electrical system, bringing with it the potential to seriously harm appliances, computers, lighting fixtures and any other kind of electronic. You'll usually notice one occurring when the lights in your home suddenly get much brighter for a period of time. Since the electronics in your home are only designed to handle the flow of electricity that regularly passes through the property, their wiring can be overwhelmed.

Sometimes these surges only occur for a short period, causing your lights to increase their brightness for what seems like just a few seconds. These instances are called power spikes and are less harmful to your electronics than a full-on surge, as the amount of time that your appliances are overwhelmed is generally brief.

The pool at your Tampa home is an excellent place to enjoy recreation, to relax, or even to host events and parties. But are you getting the most out of your pool design? The use of light can add not only dynamic appeal to your space, but provides a greater level of safety. Not to mention the fun of a nighttime pool party!

A modern convenience often taken for granted, electric power, can be found everywhere. To route electricity from the power station to your wall outlet requires many steps. Residential house wiring includes a variety of wiring and control devices to ensure safe and reliable service.

Electricity in the home is distributed by means of branch circuits. Furthermore, each branch circuit is supplied via a circuit breaker sized per the expected load on the circuit. A typical lighting and receptacle circuit will be rated at 15A. Because of their size, larger loads like ovens, clothes dryers, and air conditioning units are given dedicated circuit breakers.

A typical home can have dozens of 15A circuits, and several 20A, 30A, or even 50A circuits. Yet the total of all these breakers is much more than the size of the main breaker. However, this is intentional. It’s highly unlikely that every circuit will be fully loaded at any one time, so a demand factor is taken into account to keep the main breaker at a reasonable size.

A wood-framed home will typically use solid copper non-metallic sheathed cable for the majority of wiring applications. Solid conductors are easy to terminate and cheaper than equivalent stranded wire. The AWG size of the wire is determined by the expected load on the circuit and by the size of the breaker protecting it. You should never connect a wire to a breaker that is too large to protect it, as an overloaded wire can easily catch fire.