Most people have dealt with a power cut at some time or the other. There could be a very bad storm or lightning could strike and the power could get cut; but it also returns quite quickly. However, you might switch on the computer and notice it has stopped working.

This is caused when lightning hits a power line which results in a sudden surge on the electrical pressure that overloads the electronic circuitry. It’s true that lightning strikes cause power surges; even everyday appliances in our homes can cause power surges every time they are switched.

Over time, these seemingly small surges can cause a lot of damage to your property; and they slowly reduce the lifespan of your refrigerator, computer or air-conditioner or any other appliance that’s plugged into a power outlet or any that’s been hardwired into the electrical system in your home. The one way to protect your property from damage is to learn more about what power surges are.

Across Australia, the basic electrical voltage for residences is 230V + 10% up to – 6%. The load vibrations are taken into account in this particular range, as the appliances quickly cut in & out. In case the voltage increases above the working range of the appliance, it can result in arcing in the appliance.

These arcs generate heat, and these results in damage to the electrical components within the appliance. This type of damage is cumulative and the appliances are still able to function normally, till the point the damage becomes so excessive that your PC or TV just stops working for no apparent reason.

For all plug-and-play appliances like your TV and PC, you can connect them to a point-of-surge protector, and that becomes a very easy solution. This particular system is very much like a standard power board. You simply have to plug in the appliances that have to be protected, into the device. This device doesn’t suppress/arrest the surge; it redirects that surge straight into the ground. If you have to protect only a single appliance and a point-of-use protector doesn’t fit, then it’s possible to get a special outlet with the built-in protection installed.

Even as the point-of-use devices protect various appliances which are typically plugged into any power outlet, you would have to get another device to protect those items which are hardwired into the electrical system of your home, including the lights and air-conditioners. These devices can be easily complemented by an electrical panel surge protector.

If it’s installed inside the mains, it will level out the fluctuations and power spikes; or it might also stop them well before they reach the devices. When a mix of electrical panel surge protection and point of use protection are used, it helps provide your equipment and devices from very powerful voltage spikes.

If you have consistently experienced any power surge issues in the past or if you want to just protect your property against the probability of surges, you only have to call us and speak with our experts. They will provide you with all the information and guidance you need and will ensure that you get the kind of solutions that work perfectly for you.

For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

Are you sick and tired of paying an arm and a leg for your electricity bills? Congress is considering legislation that could bring you some relief. A bill was introduced to the House of Representatives this summer that would update the Title I Home and Property Improvement Loan Program, which helps consumers make efficiency upgrades to their homes. The new bill is intended to help homeowners invest in solar energy to power their home electrical work. Read on to learn more about this legislation and how it can help you.

Upgrading Your Electrical Work

The Title I home loan program has been around since 1934, aimed at helping homeowners with capital for home improvement upgrades. Currently, Title I is working through the Federal Housing Authority's Power Saver program, designed to promote clean energy and fight climate change. Home energy efficiency upgrades like photovoltaic solar panels, therefore, are a natural fit for the program.

The legislation currently in front of Congress, called the “Solar and Water Efficient Homes Act,” would update the Title I guidelines to better accommodate modern technologies, as well as increase the number of loans that are available and reduce the bureaucratic red tape that has bogged down the program in the past.

Bringing the Capital to You

Upgrading your home can require significant costs that are beyond the reach to many low and middle income families, so the Title I program provides capital that allows homeowners to realize energy savings immediately. Those who are eligible can get loans of up to $25,000 to make a variety of efficiency upgrades to their electrical work, most notably by installing solar panels. The program will also help homeowners purchase new HVAC systems, beef up their home insulation, buy new water heaters and even install geothermal heating systems.

“Title I loans have helped hundreds of thousands of homeowners improve their homes,” Rep. Jared Huffman (D-California), one of the bill's sponsors, said in a press release. “It’s time we make it easier for homeowners to invest in energy efficiency upgrades and improve water conservation, creating good local jobs, and helping the environment.” The legislation also hopes to spur job creation by encouraging consumers to spend more money on home services labor and equipment.

Efficiency Arrives at Your Home

When it's time to boost your home efficiency, Title I is there to lend a helping hand – and if Congress passes the Solar and Water Efficient Homes Act, the incentives will be even stronger. If you want to learn more about the Title I loan program, or need any repairs done on your home electrical work, contact a qualified electrician today.

The best Allen electrician can tell you that chances are, your air conditioning unit is probably going to be the most frequently used electrical appliance in your home this summer.  Making sure that the a/c unit is running efficiently and safely is the best way to save money and prevent costly and dangerous electrical problems. Still, as the best Allen electrician will also tell you, preventing electrical issues can be difficult for someone who doesn’t recognize electrical problems immediately. After all, most of us who are not professionals probably don’t.

Surprise! It’s NOT Your Unit

As the temperatures rise this summer, keeping up with the maintenance of your air conditioning unit is one of the most important things you should do. However, when customers hear about maintaining their a/c unit, they often think in terms of Freon and condensers. The truth is that, although those are clearly important, one aspect that is often overlooked is the electrical part.

It may surprise you to know that calling an air conditioning guy when your unit is on the fritz isn’t always the right thing to do. In fact, any Allen electrician will confirm that, indeed, half the time the problems aren’t with the a/c unit but with the electrical system. If the problems are electrical, they can result in dangerous blowouts and burnouts that could cost you a fortune—or even your home, if a fire were to start. So, with so many things that could go wrong, how can you be sure that the problem calls for an Allen electrician and not an air conditioning repairman?

Air Conditioning Electrical Safety Tips

For instance, did you know that a lot of electrical problems arise when swapping air conditioning units? Something as deceptively simple as trading your current unit for another one, especially if the new unit is larger, can wreak havoc on your electrical system. The amount of wattage required to power the new unit can result in overloading, overheating and damage to the unit as well as to your home’s electrical system. You can burn the lines quickly. Some who think that they have found the solution in splicing their lines to accommodate a newer unit may also be in for a dangerous wake-up call. Splicing lines is never a good idea. When in doubt, call your local electrician. He understands what should be done.

Another thing that your electrician understands that you may not be aware of is that you need him to come out and inspect your circuit breakers regularly to make sure that no wires are melting, no circuits are going bad, and there are no potential fire hazards looming. Because a/c units consume so much power, many times they are wired directly into a circuit breaker. Loose connections in the circuit breaker can cause many problems, including irreparable damage to the electrical system. Be sure to always have an electrician come check your breaker and wiring to be on the safe side.

The electrical work is not limited to the obvious parts of the unit that may need help. The Forced Air Unit (FAU) part of your air conditioning unit is one of the most prone to electrical failures, and yet it is the one part that is often overlooked because it’s located somewhere in a closet, a spare room, or a utility space inside the home. The blower fan inside the FAU often blows out, causing issues with the overall functioning of the unit. Here’s the best way to prevent this: Make sure your electrician does routine maintenance on every part of your air conditioning unit, including the FAU, to prevent blowouts.

Electric Man: Best Allen Electrician

The best Allen electrician makes no bones about the importance of checking your electrical systems when turning on your air conditioning for the sizzling Texas summer, and how much you can save on your summer electricity bill, repair costs and a/c maintenance and repair. As summer heats up, let the team at Electric Man take a look at your unit and help you save money, time and repairs. For more helpful tips, read ElectricMan’s blog or connect with us on any of our social communities. If you have any questions, feel free to call us at 972-792-7270, or use the Contact form on our website!

Though there are a variety of different electrical tasks that a handy homeowner can tackle on their own, taking on a job that is too complex or difficult for you can be deadly. If you do not know exactly what you are doing, or if you have to work with the electrical wiring in your home, we highly recommend that you have a professional electrician in Pasadena do the job. If you familiarize yourself with some of the most common signs and symptoms of wiring problems and other electrical problems, you will know when it is time to give us a call.

The following are some of the most common signs of more serious electrical problems:

You should never procrastinate in having your electrical system inspected by a professional electrician Pasadena. This is because even small problems can result in huge dangers. Keep your home and family safe by knowing, recognizing and responding to these signs of wiring issues.

Click here to visit our website.

This is the final post in our four-part series, "The Secret Guide for Super Moms” — tips, tricks and hacks for busy moms who need to know everything that’s happening in their house.

If you believe Pinterest, every home repair or improvement project can be a do-it-yourself job. Apparently, if every blog is to be believed, moms and dads around the country are remodeling bathrooms, rebuilding old houses and refurbishing vintage furniture -- and they do it all the time! And they look great doing it! And they have plenty of time to take lots of photos!

Maybe some people really are able to do it all (and write about it, too). Most of us are too busy and simply don’t have the training to do more than the basics around the house. When it comes to potentially dangerous repairs, a super mom knows that she needs a professional. When the time comes to fix, rewire or repair her home’s electrical needs, she knows she needs an electrician.

Electrical wiring is complicated and can be dangerous -- and it's tough to spot signs you need an electrician. An amateur electrical job may cause poor wire connections, overloaded circuits or faulty grounding. These situations are hazardous to you, your family and your property. While it may be tempting to try saving money by doing it yourself, or trusting your spouse or a friend to help, you're better off spending the money to have the job done right.

Let's take a fairly common scenario: your fuses keep blowing, or your circuit breakers keep tripping. Yes, you can keep replacing the fuses, but do you know whether they're the right type? Screwing in a 20- or 30-amp fuse as a replacement for a 15 is tempting—no electricians needed, right?—but now you've created a fire hazard by overloading your wiring. The smarter move: call a professional, certified electrician to wire a new circuit.

Like fuses, circuit breakers are meant to prevent circuit overload and the risk of fire, but we use much more electricity than people of our parents' or grandparents' generation. As you upgrade and add appliances and gadgets, you may need to upgrade your circuit breaker panels to adequately supply your home with power. Hire an electrician to do the job, not your brother-in-law who swears he did the same kind of work in the navy. The work is extremely complicated and should not be attempted by an amateur.