The march of consumer product efficiency continues. Modems, routers and other internet equipment are the latest items to get a bump in energy efficiency thanks to a voluntary agreement between manufacturers and trade associations. The standards mean that new equipment should use about 10 to 20 percent less electricity than the gear currently on the market. The bottom line – reduced energy bills for consumers.

Homes Across the Country

The change is ultimately expected to affect 80 million homes in the United States. Currently, the terms run through 2017 and require manufacturers and providers to make their efficiency data available publicly – ask an electrician if you need help interpreting the data or picking out the best model once the new equipment hits the shelves.

“DOE appreciates industry’s voluntary commitment to improving the energy efficiency of small network equipment, and looks forward to the progress they can make and verification of the impacts at the appropriate time,” Dr. Kathleen Hogan, deputy assistant secretary for energy efficiency, U.S. Department of Energy, said in a press release. 

Preparing for the Internet of Things

The voluntary agreement was hammered out among the Consumer Electronics Association, the National Cable & Telecommunications Association and the companies that make the equipment. This efficiency upgrade comes at a crucial time – not only are modems and routers essential for internet access, they will only become more important as smart technology advances and more of your household systems are hooked up to the internet.

“This agreement will begin saving consumers energy and money – and do so long before any mandatory regulatory standards could take effect – while protecting innovation and competition,” Gary Shapiro, president and CEO of the Consumer Electronics Association, said in a press release. “By setting requirements for energy-efficient broadband equipment now, the agreement will lock-in efficiencies at the dawn of the Internet of Things, which depends on strong broadband networking.”

Following the Cable Box Lead

This agreement is similar to a voluntary deal worked out by manufacturers of cable set-top boxes, in which the companies worked with the U.S. government to set an attainable benchmark. The deals are voluntary out of practicality, because federal regulations can take years to take effect and can be quickly rendered obsolete by ever-advancing technology.

“Our industry has proven that voluntary, energy-conservation agreements are the best means of effectively improving energy efficiency, while recognizing the lightning-fast pace of tech innovation,” Shapiro said.

Similar to the set-top boxes, modems and internet equipment are nearly ubiquitous in U.S. households, and they draw power nearly all the time unless the family pulls the plug at night. That means there's a lot of room for cutting back on their electricity usage. If you aren't sure whether the energy savings are worth upgrading your modem or router, ask an electrician to help calculate your consumption and offer strategies on how to get the best return on your conservation investment.

When facility managers or building owners first start the search for new replacement lighting fixtures in their facility, it can seem like a long road ahead.

From all of the read this post where we talk all about what it is. From there, you can come back to this post and continue, it will really help you keep up! Now, let’s get into when high bay lighting is practical in both broad terms and specific applications it is best used in.

In broader terms, the most appropriate time to use a high bay lighting fixture is for ceiling heights that are between 20 to 40 feet high. For heights between 15 to 20, you typically are going to go with a low bay fixture, but that’s for an entirely different post. For anything lower, you will typically be dealing with tubes and panels lights, most often found in offices, hallways, and other similar type environments.

So for commercial and industrial type environments in which the ceiling height is 20 to 40 feet tall, a high bay lighting fixture is commonly the most chosen lighting fixture to install. That is the broad definition of when high bay fixtures are going to be used at the most optimal rates.

So, what types of high bays are often used and fit the purpose perfectly. Although these applications are highly relevant, there are some we have not listed and may have missed, but these are just a few of many very practical applications that high bays work perfectly in:

Gymnasiums

Think about your school gym, or even your warehouses often have tall ceilings due to storage space requirements, this need for space vertically makes their ceilings the perfect height for high bay fixtures.

Factories

Similarly to a warehouse, factories and production facilities need proper lighting to keep things safe and consistent. With proper lighting through installation of high quality high bays (such as with LED technology), you opt-in for better safety standards and higher consistency in your production efforts.

Airplane Hangars

Large airplanes call for large ceilings in the hangars and a proper lighting system is a must for this environment. When maintenance is required, you need clear and proper light to contact one of our professionals.

Prisons and correctional facilities are full of security threats, it’s just common sense.

That is why it’s a major task and a seemingly forever ongoing one to try everything in the book to reduce threats and increase security for everyone in, near, or even outside the facility.

Today we wanted to address how we can solve 2 major correctional lighting system and things you should look out for when finding fixtures perfect for your building and budget.

Firstly, a LED prison lighting system will reduce indirect stress and irritability in both inmates and staff.

Secondly, LEDs within correctional buildings will improve detection of movement, which we all know is crucial.

How you ask? Well, lets talk about each one individually and break it down a bit more than just one sentence. From there, we will talk about how to go about making the conversion over to LED, like we mentioned at the start.

Have you ever been around a light that was flickering and or buzzing? It can get annoying, and fast. Imagine living under these conditions, everyday all day; no break other than a few hours when you go outside. Sounds like no fun, and it can lead to some serious stress and irritability issues for both inmates and staff.

For obvious reasons, additional stress on inmates will never produce a good outcome for anyone. But, another important point is that this can effect your staff and guards too. It can affect their ability to perform at full capacity, which in combination with highly irritable inmates is not a good mix whatsoever.

With LED technology, they will never be susceptible to flickering nor buzzing. Not even near the end of the lights lifespan will they flicker or buzz, unlike other technologies commonly still used in such facilities. Thus, you can avoid any stress or irritability which may be caused from flickering / buzzing lights.

If you can’t tell where everyone is at every second, you’ve got an issue. This is especially important for outdoors during the time when it is dark out. Sure, some light is better than none; but why jeopardize your operations with a flickering light when you could upgrade to LED and get rid of the issue entirely?

As you may or may not know, flickering lights make it harder to not only detect movement, but also identify humans. Think of a strobe light, it’s a bit harder to actually make out what is going on entirely. This holds true with a flickering light, even if it isn’t as bad as a strobe light is.

Here we are going to list a couple of the other major general benefits that LED technology offers over other technologies such as metal halide, HPS, fluorescent, and similar.

There are really only two routes you can take, LED retrofit lighting kit will work perfectly. On top of that, retrofitting is a much cheaper option (typically) then a full replacement is. So, if you don’t need to fully replace then stick with retrofit kit LEDs and you will save a lot on your lighting system investment.

Conclusion

Flaws can always be picked at, especially in such tedious and unpredictable environments like the one we are discussing in this topic.