Snow and ice are major concerns for homeowners throughout much of North America, and that usually means pulling out the snow shovel a few times each winter. Shoveling snow can be strenuous and uncomfortable work, but it's the only way to get those sidewalks and driveways clear -- or is it?

If you're familiar with radiant floor heating -- an HVAC solution that uses heated coils to warm a home from the floor up -- that same technology has applications outside the home, as well. Specifically, it's a great way to melt ice and snow off of walking and driving surfaces without having to grab a shovel or even venture outside.

Hard on the Pocketbook

Of course, there's a pretty big catch: the price. The equipment and installation can add a significant amount to any home building or remodeling project, especially if the surfaces you want to heat are far from the nearest power source. And that's just for the heating elements -- there's still the matter of removing the old surfaces and pouring new ones. All together, it can cost well into the tens of thousands of dollars to install radiant heating under the driveway and walkways of an average home.

For this reason, radiant heating is usually only a feature in new construction -- with a plan to install the equipment right from the outset, it's possible to shave thousands of dollars off the installation cost.

There's also the cost to operate the equipment, which can run several hundred dollars per winter for homes in especially snowy, icy climates. But for homeowners who dread shoveling every year, that could be a small price to pay.

Going Another Route

If you're not ready to drop thousands of dollars just to cut shoveling out of your life, there are several less pricey ways to keep surfaces clear and safe.

Heat mats. If you like the concept of using radiant heating outdoors but don't like the price tag, you might find a suitable compromise in heat mats. Available in a wide range of sizes, all-weather mats can be placed on your walkways and powered through extension cords to melt snow and ice as it falls. You'll still need to put them out before the winter weather arrives and stow them away after the storm, but it will at least spare you some shoveling.

Rock salt. It's cheap, it's easy to use and it's available at most hardware stores. It's also incredibly effective for melting ice. But it's not without its downsides -- rock salt can be corrosive to metal and even concrete, so you might expect some damage to your vehicles and surfaces over the course of many winters. It can also harm vegetation, pets and indoor surfaces like carpet if it's tracked inside. So if you use salt, use it with care.

Shovel early and often. You'll spend more time outdoors, but if you start shoveling in the middle of a storm, you may be able to prevent ice accumulation. You'll also make it a little easier on your back by shoveling lighter shovelfuls. It's not the ideal solution, but it beats slipping on a slick surface.

Thinking of installing a radiant heated driveway or walkway? Reach out to your local electrician to take the first steps, or just ask for more smart ways you can stay comfortable and safe throughout winter storm season.

It’s football season, which means every Saturday and Sunday, your home’s TV becomes an essential gathering point in your home. Sadly, in the Washington, DC, Maryland, and Northern Virginia area, autumn is also thunderstorm season. So how can you protect your expensive TV from electrical surges and storms? The electrical experts at Kolb Electric have the answer.

Electrical surges—whether from lightning strikes or otherwise—are easy to prepare for with proper equipment. And if you’ve spent four figures on a television, it might just be worth the investment! You can protect your TV from a power surge in two ways: by installing a dedicated circuit and/or installing a whole-home surge protector.

Your dedicated circuit for your TV will make sure that your TV isn’t having its power leached from other electronics in your home, making its sound and picture clearer, while the whole-home surge protector will protect your TV from lightning strikes and power surges.

Effectively defending your home from power surges requires a two-step approach: first, outfitting it with a whole-home surge protector, then using surge-protected outlets and power strips indoors. Both types of surge protectors act essentially like pressure relief valves, diverting excess energy away and restoring normal operation once levels regulate.

Whole-home surge protectors are usually wired to a service panel and are designed to stop surges of at least 40,000 amps, though larger ones can be installed. Pairing them with individual plug-in surge protectors should do a good job of catching any potentially damaging energy that may get into your home.

Like many safety-related things, whole-home surge protectors are appliances you buy and hope to never actually use. But all it takes is a single downed line or big lightning strike to cause thousands of dollars’ worth of damage to your home—not worth the risk!

Prefabs provide on-site, off-site and other hidden advantages. For instance, faster installation at the job site reduces the project duration. Prefabs have the potential of cutting the installation time by almost a half. In addition, the project will require fewer workers in the field resulting in a big reduction in labor costs and improved profitability.

There’s also a significant savings on labor, which can be very expensive and in short supply. The prefabrication process is considered more of a manufacturing function so the contractor is able to achieve success with fewer workers. The workshop can make use of semi-skilled workers and apprentices, unlike a construction site where an electrician is required to perform the installation.

Fewer materials and less activity at a job site mean that the project is completed faster with a reduced opportunity for accidents and delays. In addition, by delivering all the individual components to the workshop for assembly, the level of material handling is narrowed. This equates to an easy-to-manage supply chain. Fewer materials reduce clutter, waste disposal, and the need for extra storage space.

The workshop provides the best environment for producing the assembly fast without the interruptions that might be found at a construction job site. Further, the production of prefabs is not affected as much by delays from other trades, bad weather, and other construction project hold-ups.

Electricians spend less time working at dangerous heights and precarious positions, hence reducing safety risks. Prefabs allow contractors to reduce the need for as many licensed electricians on the job site. This can result in greater productivity and profitability.

Increased competition and high labor costs have caused declining profits for many electrical contractors. However, with the use of prefabs, profitability can be improved by reducing the labor and time spent at the construction site. Additionally, fabricating electrical assemblies in a workshop makes it easier to stay on budget and hit your project timelines.