Indoor Generator Provides 20,000 Watts of Stored Renewable Energy to a Ranch Home, Even When All External Power Supply is Unavailable

Dallas, TX  December 30, 2011– Doug Kerr is the proud owner of a stretch of land located in the rural area of Kaufman County (Texas) where the air is fresh and the hustle and bustle of city life is non-existent. One thing Doug’s land doesn’t have, however, is a city power grid. Traditionally, to gain access to power in an area that hasn’t already been included on the electrical grid, you can pay the local electrical provider a large sum to run new electrical service to your location, or be forced to use noisy, polluting, and high-maintenance fuel-powered generators.

One of the best ways to deter vandals, miscreants, burglars etc from entering your residential premises, is to set up an efficient camera system. Of course many people also use their CCTV cameras for indoor surveillance in their home; to monitor their baby or even to keep an eye on domestic help. Regardless of the brand, if you are setting up a new security system, there is some basic planning you should be doing.

Some wireless CCTV cameras are basic plug and play ones, and you won’t have trouble setting them up yourself. However, if you have chosen the more complex and advanced systems, you would need a professional to handle the installation and set-up for you.

The company you choose for the job should be able to handle all the cabling and hardware installation. For advice or CCTV system installation services, call Allround Electrical at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263

Any building, in any industry, in any area of the world, is susceptible to having potentially hazardous and radioactive exit signs installed throughout their building.

This could mean they are in schools, near your office, or anywhere else where a radioactive setting probably isn’t a desired situation to be in.

This is why we thought it was necessary to create this post to help and guide you towards identifying, removing, and finally replacing your radioactive exit signs with new signs that are much safer and even efficient, saving you money over other alternatives.

Firstly before we can remove and replace these seemingly nuclear exit signs, you have to be able to identify if you have them or not. But before that, lets explain what exactly makes these exit signs radioactive.

How are some exit signs radioactive?

Just the same way as some exit signs are safe, it is all in the way they are built. For some reason, whether it be technology of the time or something else, people assumed it was a good idea to create exit signs with Tritium, also known as 3H or H-3. Tritium is a radioactive isotope of hydrogen, causing exit signs made with this to be radioactive by default. The only seemingly positive upside to these exit signs is that they are non-electrical, meaning they won’t rack up anything in electricity bills.

But before you become alarmed with what we have shared with you so far, tritium emits only a low-energy beta radiation, which in turn causes the sealed glass tube it is in to glow (causing the exit sign to give off the illumination it requires). Thankfully, it is rather well known that this type of radiation can hardly (if at all) penetrate a piece of paper or clothing. So while yes it is a very low level (energy wise) type of radiation, the fact that there are alternatives that will remove radiation entirely from your building is all the reason to uninstall your tritium exit signs and replace them with something more safe, like LED exit signs.

Now that you understand the technology and how tritium in exit signs work a little bit more, let’s go over how exactly you can identify whether or not you have these types of exit signs in your building.

Identifying a radioactive exit sign should be fairly easy. All of these signs are required to have some sort of “Caution of Radioactive Material” warning on the fixture.

If you do find such a warning label, it is safe to say your light is made of tritium. Another tell-tale sign is whether or not your signs are connected to an electrical source or not as tritium signs do not require any such connection.

Once you’ve identified if you have a tritium exit sign or not, if you do happen to have one, you may continue on to removing and replacing it with the alternative exit sign, LED.

As with any lighting fixture, we recommend to bring in a professional contractor to do the job. But as a general guideline, you can typically recycle your tritium signs by returning them to the manufacturer or place of purchase.

If you purchased the building with them pre-installed and are unsure of where they came from after inspection of the signs for any brand markings, you can try two things:

1: Try contacting the previous building owner or collect records of where they were manufactured

2: Recycle them with a third party. like these), buying them, then installing them yourself or with a professional (we recommend a professional).

Here are a few things you should remember and keep in mind when dealing with a building that has radioactive exit signs:

While incandescent light bulbs are popular, they’re quite dangerous. Incandescent bulbs have high-temperature gasses inside, and these gasses can react dangerously with external air. If your incandescent bulbs are in a cold room, they might create a combustion nightmare. Keep them away from drapes, beds and other upholstery items.

Wall outlets installed near sinks, faucets and bathtubs can propose dangers. Make sure your outlets are installed away from any water sources, as they can create electrical hazards. If need be, your technician can reinstall them in a different location. Pay close attention to any outlets in your home’s bathrooms and kitchen.

Chewed, frayed or plain old electrical wiring can create a fire hazard. While most worn out wiring will be exposed, some lengths may be hidden within your walls. Keep your pets away from exposed cords, and reduce the chance of fire before it’s too late. Additionally, contact a professional for an annual wiring checkup.

Commonly, homeowners max out their power strips. If you have a lot of electronics and appliances, you might be overloading your power strip’s electrical availability. If this happens, it’ll spark—creating a fire hazard. Even if you need to plug in your appliances, you can remove any flammable materials away from your power strip, reducing any dangers while maintaining household functionality.

High bay fixtures are a critical part to any high ceiling building. Since these high bays require such large lumen output, the cost to run them can be high. By converting to LED high bays, you are able to reduce your energy consumption in your most energy intensive fixtures by up to 75%.

In this post, we are going to cover (non-comparatively) 5 top types of LED high bay lights for this year, 2017. While not every item on this list will apply to you and your building, there will surely be one or two for your needs if you currently use high bay lights in your facility.

If at any time you come across a question, want more information, or are actually interested in implementing LED into your building;

These traditional commercial high bay lighting fixtures look a lot like what we think a normal high bay should look like. They are reminiscent of traditional style Metal Halide and High Pressure Sodium high bays and offer your typical round high bay look.

These high bay LED fixtures can replace both 400W and 1000W Metal Halide. The smallest unit is 80W producing 10,240 lumens. There is a 160W unit producing 19,200 lumens. This would be a good 400W Metal Halide replacement. And the largest unit at 400W produces 51,200 lumens. That’s 128 lumens/watt. And, USA Made backed with a 10 year warranty.

These LED high bay Lighting fixtures look a lot like a troffer style panel. The advantages of this type of fixture are the LEDs are spread over a larger area. This has 2 main advantages – Great light distribution and large heat sink. It is important to realize these lights are particularly good at light distribution, creating an even distribution.

These high bay LEDs can replace both 400W and 1000W Metal Halide. The smallest unit is 120W producing 15,360 lumens. There is a 150W unit producing 19,200 lumens and the largest unit at 300W produces 38,400 lumens. USA Made backed with a 10 year warranty like the traditional style high bay.

A retrofit kit utilizes your existing fixture and replaces the bulb and ballast with the LED head and the LED driver. These retrofits can be significantly more economical than replacing the entire fixture, for obvious and not-so-obvious reasons. One of which being it’s cheaper to buy. Another being it’s (typically) cheaper to install as well. For this reason, our high bay retrofit kits HAD to make it on the list of the best high bay lighting options.