At the Super Bowl this Sunday, almost a third of the nation watched as a power surge caused the big game to come to a halt at the beginning of the third quarter. While the Mercedes Benz Super Dome sat only half lit for almost 40 minutes of what would be one of the most exhilarating Super Bowls of all time, millions wondered how the organizers of the game could allow such a mishap to occur.

A power surge is when a burst of electricity floods a circuit or electrical system, bringing with it the potential to seriously harm appliances, computers, lighting fixtures and any other kind of electronic. You'll usually notice one occurring when the lights in your home suddenly get much brighter for a period of time. Since the electronics in your home are only designed to handle the flow of electricity that regularly passes through the property, their wiring can be overwhelmed.

Sometimes these surges only occur for a short period, causing your lights to increase their brightness for what seems like just a few seconds. These instances are called power spikes and are less harmful to your electronics than a full-on surge, as the amount of time that your appliances are overwhelmed is generally brief.

We’ve added a new line of 

Using 316 marine-grade stainless steel and polycarbonate lenses, the 60-, 120-, and 180-watt LED boat lights resist damage from shock and vibration. Hardware is included for surface-mounting on a variety of transom types, and the LED lights must be completely submerged to function properly. To prevent failure due to out-of-water use, a built-in temperature protection circuit powers the lights off if they reach 194 degrees Fahrenheit. The underwater boat lights operate within a wide 9-32V DC range and are designed to last 50,000 hours.

If there’s one thing kids seem to love, it’s playing with everything around the house other than their toys—the more dangerous the better! Electrical outlets in particular are an endless source of fascination for young children, and according to the Electrical Safety Foundation International, hospitals across the country treat nearly seven children for electric shock and burn injuries related to tampering with wall outlets each day. But buying childproofing devices for your electrical outlets can be a challenge, and if you don’t choose carefully they may not fit in your outlets or may be too easy for your child to pull out. So how do you choose?

There are two types of outlets commonly seen in homes—standard and decorator outlets. You can tell them apart by looking at the number of screws they have:

Different types of outlets have different requirements for childproofing materials, so figuring out which type you have is very important. Note that standard outlets will be able to use most childproofing methods—decorator outlets are a little more complicated, but the packages on the items you buy should list whether they are compatible. Remember that most items approved for decorator outlets will not work in standard outlets, and vice-versa, so choose carefully!

Outlet covers, which usually plug right into the outlet, are a good choice for outlets that have “fixed” items that are plugged in all the time, such as lamps or televisions, as well as areas that use large adapters like at the computer. Outlet covers are effective at keeping both infants and toddlers out of the outlets, which means they’ll last for a number of years. Outlet covers for both standard and decorator outlets can be purchased.

Unlike outlet covers, safety outlet plates replace your existing outlet plates and have a small sliding door that covers the receptacle when not in use. These work best for outlets that you have to repeatedly plug things into and unplug things from, such as a vacuum cleaner. They are also difficult for children to figure out and should be effective for many years.

Ideal for outlets that are kept out of site and rarely used, outlet plugs are usually easier for kids to figure out but are still good at preventing access to the inside of the outlet. The good news is that they can be used interchangeably in standard and decorator outlets.

Keeping your children safe is your number one priority, and childproofing your electrical outlets is a great way to do that. Damaged or malfunctioning outlets can also be a major safety hazard in your home, so if you need outlet repair in Maryland, Virginia, or Washington, DC, call Kolb Electric today!

Motion sensor LED stair lights let you safely and effectively navigate your steps while eliminating the need for any action. And because they turn off automatically, they also save power! We’ve recently installed these handy little LED stair lights and wanted to share the process with you.

wire that will be needed. It is best to order more than you need so that there’s slack in the line and enough to extend to where your power supply will be mounted.

It’s important to choose the correct wire gauge for the length of wire you need and amount of current that will be flowing through it. The key is to avoid voltage drop, which happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). The longer the run of wire, the lower the gauge of wire needed.

*If you need help determining the correct wire gauge, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

3. Using wiring from the

4. Use a run of wire to join the PIR sensor at the top of your steps with the power supply. You can wire both PIR sensors to the power supply using electrical tape or with

5. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

7. Finally, connect to power.

LED stair lights and

4. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

6. Finally, plug the power supply into your wall outlet.

Some really serious problems that need to be addressed immediately are:

These are not conditions that can wait until a more convenient time. You need to call your West Chester, PA 24/7 electrician immediately.

Do not worry. We’re here.

There are other times when electrical problems challenge your family’s lifestyle and comfort. Or you may have an elderly or disabled person at home who needs electricity for mobility or oxygen. In the case of the individuals with physical challenges, any electrical issue can be serious.

Customers have called on us numerous times for emergencies such as

There is something to keep in mind. Every customer is different. What may be an emergency to you may not be an emergency to your next door neighbor. Go by your own feelings. Do not let anyone tell you that it is fine to just wait. Let us know what is happening and we will honestly tell you if it is a critical problem. Just call.