Everyone has had electrical problems with lamps and lighting fixtures. Your favorite lamp may be flickering off and on. You’ve changed the bulb and that doesn’t fix the problem. Now what do you do? The answer can be as simple as replacing worn out light fixture wiring or it may be more complex than that.

Incorrect use of electricity, inefficient appliances and lighting may lead to high energy bills. In addition, the faulty state of your home insulation will lead to heat or cold air escaping when it should not. Other factors include water leakages in the washroom and kitchen sinks, leaking hot water pipes, etc. Any of these will require more energy to heat or cool the air, or pump water to compensate for the lost amounts.

An electrician can assess your entire home and make a recommendation to enable you to save energy and you may even be able to enjoy energy rebates from making upgrades to your lighting system. Address any electrical problems at this time.

Restriction of Hazardous Substances (RoHS): RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Warranties

Super Bright LEDs, Inc. offers a minimum 2-year warranty to protect against manufacturer defects and malfunctions. Longer warranties are available depending on the product. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair, or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

Read more

Lifetime Warranty

Super Bright LEDs, Inc. offers a Lifetime Warranty on a variety of products to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.

Read more

CE: Meets European health, safety, and environmental standards

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

UL Recognized: Product component safety and environmental certification from Underwriters Laboratories (UL) LLC

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

DLC: Listed as a quality, energy-efficient product by the DesignLights® Consortium (DLC®)

The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC’s Qualified Products List. For more information, click

DOT Approved: Approved by the Department of Transportation (DOT)

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.

SAE International Class 1: Classified for use as emergency vehicle lighting by the Society of Automotive Engineers (SAE)

Vehicle warning lights are ranked by the Society of Automotive Engineers (SAE) according to class. A Class 1 LED light delivers the most amount of light (in comparison to class 2 and class 3 lights) and is ideal for emergency lighting on ambulances and fire trucks as well as police and rescue vehicles.

ETL Listed: An ETL-Listed product meets national safety standards

A product that bears an ETL-Listed label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

FCC: Complies with Federal Communications Commission (FCC) rules. Won’t cause harmful interference.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won’t cause interference with other electronic devices. According to FCC’s website, “The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories.” Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC’s guidelines and limits and do not cause harmful interference.

SAA: Standards Australia (SA) compliance

Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

IP65

The weatherproof product allows zero entry of dust. It is protected against jets of water and may allow limited liquid entry.

IP66

The weatherproof product allows zero entry of dust. It is protected against strong jets of water and may allow limited liquid entry.

IP67

The waterproof product allows zero entry of dust. It is protected against the effects of immersion between 15 centimeters and 1 meter.

IP68

The waterproof product allows zero entry of dust. It is protected against long periods of immersion under pressure.

IP69K

The waterproof product allows zero entry of dust. It is protected against high-temperature, high-pressure water and steam.

UL 844: Meets requirements from Underwriters Laboratories (UL) LLC for use in hazardous (classified) locations

UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:

These requirements cover luminaires for use only under the following atmospheric conditions:

Are you looking to replace the aging light fixtures found throughout your home with an updated, multi-functional alternative? You may want to consider all the wonderful advantages ceiling fans have to offer.

And we’re not just talking about their aesthetically pleasing ambiance. Ceiling fans are a practical, economical solution to reducing your cooling needs in the summer. By creating a wind chill effect, using ceiling fans throughout your home can keep you and your family comfortable enough to lower your thermostat temperature by 4-7 degrees F, saving you up to 30 percent on cooling costs. Still on the fence? As an added bonus, the wind generated by ceiling fans also makes it more difficult for pests to fly, keeping summer pests at bay. How’s that for cool?

Say what? That’s right. Change the settings on your ceiling fans to spin clockwise, rather than their counterclockwise motion during the summer, and you’re in business! A clockwise motion forces air up, to the outer edges of the room, then down along walls to the floor, where it travels back to the center, once again rising. This motion helps equally distribute all that nice heated air from your HVAC system throughout your home, saving you much needed heating dollars.

Stand under your fan, and note the direction in which the blades rotate. (Don’t worry, it doesn’t matter which direction you face.) Remember, you want your blades to spin counterclockwise in the summer, clockwise in the winter. Wrong direction? Turn off the fan and locate the switch on the fan’s base, then simply flick the switch to the opposite direction. Done!

Choose the right blade size.

Want a cooling effect that doesn’t ruffle papers or other items in your home? Opt for larger blade sizes. They offer comparable cooling at a lower velocity than smaller blades. Don’t worry about the number of blades. This will not affect performance.

Properly size and locate fans.

Fans should be installed 7-9 feet above floors, 10-12 inches below ceilings and at least 18-24 inches from walls. Opt for 52-inch fans for rooms up to 400 square feet, 44-inch fans up to 225 square feet, and 42-inch fans up to 144 square feet. Rooms longer than 18 feet need multiple fans.

Find the right features.

Selecting easy-to-use models will encourage frequent fan use and the subsequent lowering of energy costs. You should carefully consider features and usage needs such as light intensity, fan speeds, noise level during operation, pull chains, and remote controls.

Remember, you get what you pay for.

Splurging a little on ceiling fans will earn you a model with quieter, smoother operation, more fan speeds, less issues, and longer warranty than bargain basement alternatives.

Ensure safe installation.

Professional installation as recommended by the manufacturer is essential to fan life, warranty, and most importantly, the safety of you and your family. Fans can weigh as much as 50 pounds! Safe installation should include an appropriate UL-listed electrical box made specifically for use with ceiling fans, secure mounting to a ceiling joist (or the use of a mounting bracket), and proper alignment and balancing.

Ceiling fans cool people, not rooms. Though they can help you save energy, they use it as well, so be sure to turn off ceiling fans when you leave the room to prevent wasted energy dollars. Don’t want to keep track? You may want to consider adding a motion sensor.

When you are purchasing a home, it goes without saying that you want to be sure the house is structurally sound, and that there are no lurking problems that will surface later and burn a hole in your pocket. It’s why many people get a building inspection and pest inspection done before they sign on the dotted line. While all of this sounds good, what most people aren’t aware of is that they can and should get an energy audit done too.

An electrical audit analyses the major components of the house structure; this includes:

In short, it gives you a very detailed picture about how the buildings works as a whole. For a couple of hundred dollars, you can get an energy audit done from a professional. This audit can save you a significant amount of money in the long term; it identifies the features in the house that require correction to enhance the energy-efficiency. At times, the energy audit results can play a pivotal role in your decision of whether you should invest in a particular property or not.

If you find that a house lacks in energy efficiency, but you still want to buy it, the audit results can become a bargaining tool; it may help you get the seller fix the problem, or you may be able to get the property at a much lower price. No matter which way you look at it; getting an electrical audit is a very good idea. In addition to the ones mentioned above, there are a number of other benefits to getting an electrical audit done, such as:

The simple fact is that spaces that are energy-efficient are also more comfortable to live in. Energy-efficiency upgrades will ensure that the heat will be evenly distributed across the home and your home will be warm in the winter and cool in the summer.

If the indoor air quality in your home is poor, it can cause allergies as well as other health problems. When you choose to get an electrical audit done, the professionals that are conducting the audit, carefully analyse the ventilation in your home and also recommend what can be done to improve the indoor air quality.

Energy efficiency may seem like an isolated aspect in the sustainability of your home. But when discrepancies in the building structure come to the fore during an energy audit, it’s indicative of the fact that many features are constructed poorly and that they will fail before their time. Once you have the audit results, you will get a clearer idea about what will have to do be done to improve the building envelope as a whole.

When you are hiring the services of an electrical/energy auditor, you should keep in view the fact that not every one of them uses the tools and follows the required processes while the audit is being conducted. Ideally, the auditor should use tools such as a duct blower, an infrared camera as well as a blower door.

The blower door is essentially a fan that has to be mounted on the doorframe. It efficiently depressurises & pressurises the home to measure what the air leakage is like. The duct blower performs the same function, but is attached to the ducting in the house. The infrared camera helps detect air leakage in the walls and the heat losses too.

For more information about electrical audits and the best electrical solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or by filling out this contact form.

Thanks for reading,1300 169 263

If you have any questions about our summer electrical safety tips, contact us online. Also, even simple jobs like installing light fixtures or ceiling fans may be dangerous—give us a call instead! We’re a family owned and operated business that has been serving the Baltimore, Bethesda, Alexandria, and Washington, DC metropolitan area since 1925. The valuable advantages we can offer you are great service, high quality products, and experienced workers at a competitive price.