Recessed lighting is commonly used in rooms where ceiling height is an issue. These fixtures are essentially placed flush into your ceiling and project light from a hole or an opening on an otherwise clear plane.

Often you'll find this kind of lighting in an area that utilizes dropped ceilings with removable panels. Ceilings like these are usually implemented because they are concealing pipes or wiring that is exposed beneath the original ceiling - this practice can commonly be seen in basements and industrial spaces where aesthetics weren't initially taken into consideration.

Since recessed lighting is usually exposed to the underside of sensitive wiring or pipes, there are a number of potential dangers that present themselves when these fixtures are used.

A common mistake is using recessed lighting that produces too much heat for the amount of space left between the dropped ceiling and the original. Be sure when you're installing these devices that a qualified electrician, like the kind employed by John C. Flood, verifies there is enough ventilation and room between objects that excess heat won't make the area a fire hazard.

If you notice that you have a recessed lighting fixture which is dim and periodically flickers back to full brightness, this may be a sign that the wattage of the light bulb is too powerful for the lamp. Most recessed models will have heating sensors built in that automatically dim the light to avoid flames. One solution might be to lower the strength of the bulbs that you use in these features, although the bigger problem may be that your lighting instruments themselves were installed in too close quarters.

Everyone probably knows light layering is the #1 rule in residential lighting design, but we can often neglect it in professional settings. Light layers can transform that standard gloomy, fluorescent malaise into something calm and energizing.

2. Take the layers outside too! The center’s entryway functions like a beacon in the night with those stylish ceiling lights, along with Image via CONTEMPORIST.com

If your business has a storefront or entryway, don’t neglect eye-catching light layers there either. You want to draw customers in, not scare them away.

3. Use standard fixtures in unexpected ways. A regular fixture in an unexpected place will be avant-garde, without the price tag of an avant-garde light fixture. Image via CONTEMPORIST.com

I’d also like to note those crazy recessed ceiling lights – totally echoing a standard recessed fixture only stylized and amplified. It makes you rethink the whole concept of a regular old recessed light!

Motion sensor LED stair lights let you safely and effectively navigate your steps while eliminating the need for any action. And because they turn off automatically, they also save power! We’ve recently installed these handy little LED stair lights and wanted to share the process with you.

wire that will be needed. It is best to order more than you need so that there’s slack in the line and enough to extend to where your power supply will be mounted.

It’s important to choose the correct wire gauge for the length of wire you need and amount of current that will be flowing through it. The key is to avoid voltage drop, which happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). The longer the run of wire, the lower the gauge of wire needed.

*If you need help determining the correct wire gauge, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

3. Using wiring from the

4. Use a run of wire to join the PIR sensor at the top of your steps with the power supply. You can wire both PIR sensors to the power supply using electrical tape or with

5. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

7. Finally, connect to power.

LED stair lights and

4. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

6. Finally, plug the power supply into your wall outlet.

Flickering lights do not always signify a serious issue with your electrical system. What’s more important to note is which lights flicker and how. This is a relatively common issue that can have a variety of explanations. To get a better idea of how to address your flickering lights, tailor your solution to the specific situation.

If none of the above apply, try investigating the light switch itself next. Switch the light on and off a few times to see if the flickering dies down. If not, you may have a faulty switch that needs to be replaced by an electrician. Similarly, if you replace the bulb on a plug-in lamp and it still isn’t working, try plugging the lamp into a different outlet. It’s possible that the issue could be stemming from the socket. This type of issue should also be troubleshooted by a professional, as in-depth electrical work can be dangerous.

If you’re not sure what might be causing the problem, it’s wise to call a licensed electrician to check it out. The tips above can help you narrow down what might be going on, but doing risky electrical work yourself isn’t recommended.