Prisons and correctional facilities are full of security threats, it’s just common sense.

That is why it’s a major task and a seemingly forever ongoing one to try everything in the book to reduce threats and increase security for everyone in, near, or even outside the facility.

Today we wanted to address how we can solve 2 major correctional lighting system and things you should look out for when finding fixtures perfect for your building and budget.

Firstly, a LED prison lighting system will reduce indirect stress and irritability in both inmates and staff.

Secondly, LEDs within correctional buildings will improve detection of movement, which we all know is crucial.

How you ask? Well, lets talk about each one individually and break it down a bit more than just one sentence. From there, we will talk about how to go about making the conversion over to LED, like we mentioned at the start.

Have you ever been around a light that was flickering and or buzzing? It can get annoying, and fast. Imagine living under these conditions, everyday all day; no break other than a few hours when you go outside. Sounds like no fun, and it can lead to some serious stress and irritability issues for both inmates and staff.

For obvious reasons, additional stress on inmates will never produce a good outcome for anyone. But, another important point is that this can effect your staff and guards too. It can affect their ability to perform at full capacity, which in combination with highly irritable inmates is not a good mix whatsoever.

With LED technology, they will never be susceptible to flickering nor buzzing. Not even near the end of the lights lifespan will they flicker or buzz, unlike other technologies commonly still used in such facilities. Thus, you can avoid any stress or irritability which may be caused from flickering / buzzing lights.

If you can’t tell where everyone is at every second, you’ve got an issue. This is especially important for outdoors during the time when it is dark out. Sure, some light is better than none; but why jeopardize your operations with a flickering light when you could upgrade to LED and get rid of the issue entirely?

As you may or may not know, flickering lights make it harder to not only detect movement, but also identify humans. Think of a strobe light, it’s a bit harder to actually make out what is going on entirely. This holds true with a flickering light, even if it isn’t as bad as a strobe light is.

Here we are going to list a couple of the other major general benefits that LED technology offers over other technologies such as metal halide, HPS, fluorescent, and similar.

There are really only two routes you can take, LED retrofit lighting kit will work perfectly. On top of that, retrofitting is a much cheaper option (typically) then a full replacement is. So, if you don’t need to fully replace then stick with retrofit kit LEDs and you will save a lot on your lighting system investment.

Conclusion

Flaws can always be picked at, especially in such tedious and unpredictable environments like the one we are discussing in this topic.

The London Olympics are certainly on the tip of nearly everyone’s tongue (and Courtesy of FrenchArt-Deco.com

This piece, entitled “Swimming Pool” by French artist Albert Decaris won gold in the Engravings and Etchings competition.

In 1949, the International Olympic Committee decided to stop all art competitions, reasoning that it was illogical to let professional artists compete, while only amateur athletes were eligible. Instead, cultural festivals replaced the art competitions, and still do to this day. There’s still a chance for the best of the best artists and entertainers to showcase their stuff on an international stage, and for lighting designers, this is certainly a world class exhibition. 

LED is the light source that’s in it to win it this summer, wowing Olympic fans with spectacular light shows and festive monuments alike.

At the opening ceremony, LEDs were at the center of almost everything. The dove bikes used LEDs to light up their wings as they performed a circuit of the stadium.

LEDs lit the screen showing the Queen’s acting debut, with none other than James Bond.

Even on the sidewalk outside the main Olympic Stadium, there are 20 circular slabs that capture the kinetic energy of pedestrians’ footsteps to light up nearby LED lamps for 30 seconds at a time!

Rats and mice are quite common house pests; once they find your home to be a safe place to live in and that there are different sources of food there, they will be reluctant to leave. Not only do they pose a health hazard, they also tend to cause a lot of damage to various features on your property and will chew through the insulation of your electrical wiring.

This can affect the system and impact the supply of electricity throughout your property and can be a fire hazard as well. Here are some effective tips to prevent rodent damage to the electrical wiring in your home:

Since rodents are nocturnal creatures, you won’t really see them running around your home in the daytime. However, if you are wary, you will surely hear scratching and chewing sounds in the walls of your homes. You may also hear scurrying noises coming from the attic. You should look out for nesting material or droppings and will typically find these in enclosed spaces.

It’s important to check the wiring’s insulation with regularity to ensure that it’s intact and that it hasn’t been chewed by rodents. The unfortunate part is that this isn’t something you can do for wiring behind walls. However, if you are undertaking any repairs, renovation or upgrades, take that as an opportunity to check the wiring for signs of rodent damage.

If you notice any flickering or experience power fluctuation in a certain room or part of the house, or if you find that a certain circuit breaker keeps tripping for no specific reason, get the system checked for rodent damage.

If you notice any signs of a rodent infestation, it’s important that you act without delay and take some steps to get rid of them. Buy some spring traps and rat poison from your local hardware store and set these at different places where you have seen rat droppings or heard noises. Even as you do this, it’s equally important that you also identify where these pests are entering your property from. Place the bait or poison at these points along your home’s exterior walls.

If you find the infestation to be too severe or if you aren’t too confident about using DIY rodent control measures, call a licensed electrician to inspect the wiring and check it thoroughly for damage. If they confirm that the damage has been caused by rats, it’s a good idea to call pest control professionals to handle the rodent control for you. They will provide solutions and give you advice on the steps you can take to prevent these pests from entering your property.

While the rodent control professionals will ensure that the rats are eliminated from your property, they will also advise you on how to seal all the possible rodent entry points in your home. Aside from very evident points such as doors and open windows, these pests can easily squeeze their way into the indoor spaces of your property through holes and large cracks. If the cracks are too small, they won’t shy from chewing their way in through the loose concrete of the walls.

If you have noticed any rats or mice on your property, do not hesitate to call us to get the wiring checked. We handle all types of commercial and residential electrical installation, repair and upgrade jobs. For more information, contact the AllRound Electrical team at this number – 1300 169 263. Alternatively, you can write to us at our email address.

Thanks for reading,1300 169 263

You may not think about it often, but the power coming into your home travels a long way before it gets to your refrigerator, air conditioner, or any of the other appliances in your home. On the way, electrical current encounters fluxuations and interference from things like other appliances, machinery, and low quality wiring. That “Dirty” power can cause inefficiency and disturbance in your appliances, making things like the motors in your refrigerator and air conditioner, the circuits in your television, and all of your other electrical gadgets work harder than they need to, and wear out faster than they should.

A Power Conditioner will take the electrical current coming into your home and “clean” it, using filters to isolate power outlets and remove interference. This provides the correct voltage level to sensitive electrical equipment, allowing it to work safely and efficiently at the correct voltage.

Because power conditioners help your appliances run more efficiently, they can also lower the overall cost of running these appliances, and extend their lifespan. For more information about home power conditioners or for help on any electrical project in your home, please reach out to Dallas Electrician, ElectricMan Inc. by phone at 972-792-7270, or through the contact form on our website at www.electricmaninc.com

Whenever you have time to thoroughly clean your home, you usually try to get the portions that are hidden from view. You check under the bed, vacuum beneath the cushions, or dust the tops of shelves—anything you can do to keep every part of your home sparkling, even if there’s no one around to see it. So why would you neglect to clean the ductwork?