Twilight Designs in Las Vegas, flush mount (recessed) step lights are often the fixture of choice when used indoors. He credits this to how easy it is to cut into and run wiring through drywall, especially when installing step lights after construction is completed. “While planning ahead is helpful,” says Bilik, “there are many products available for running wires post-construction.” He recommends 110v wiring to fish through walls and attics or low voltage wiring when 110v is not an option.

For less penetrable surfaces like concrete and stone, surface mounted fixtures are ideal because they mount directly to a wall or flat surface. These step lights commonly have a profile of as little as 3/4-inch up to 3-inches and a trajectory that directs light at the wall or at the surface below.

Regardless of whether you are using a flush or surface mounted step light, you must consider the type of cover (or faceplate) the fixture has. Bilik says that in his experience, most covers will fall in one of three categories, each with its own series of benefits:

If you are deciding whether you want to install solar panels or not, there are a few interesting and enlightening facts to consider. Not only should you think about the cost of solar panels, which can be way more affordable than you realize, especially when you take in to count your electricity expenses going down considerably, there are a few other things to think about, as well:

If you are looking for solar panel installers, The Electric Connection, is here to be of assistance. Check out more of our solar energy blogs for more information about solar panel installation, installation costs and the benefits it can add to your own home and life in the long run.

Why is a bad GFCI outlet such a big deal? To put it simply, they exist to protect you from electrical shock. As required by electrical code, these outlets are in places within your house where there is an increased risk of electrocution. These include bathrooms, kitchens or outside (wherever water is likely to be present).

GFCI outlets come with a sensor designed to identify changes in current, which can indicate unsafe conditions or the risk of shock. There’s a breaker inside the outlet, which trips when there is a surge in current. This shuts down the power supplied to the outlet and any connected outlets, protecting you from electrical shocks.

GFCIs come with two buttons on them (usually black and red), with one serving to test the outlet and the other for resetting it after the breaker inside has tripped. A bad GFCI is a serious problem, as they are too important for you to ignore them for any amount of time. It is, therefore, crucial that you stay aware of when you might have an issue with one of yours.

In the majority of cases, a GFCI outlet protects you by not providing power. If there is an issue with an appliance plugged into it, the power would likely cut off long before you even get the chance to use it. When this happens, it can be easy to assume there’s something wrong with the outlet itself. But in many cases, its breaker tripped for a good reason. GFCIs are also designed to shut themselves off in the event of a person getting shocked, which isn’t always easy for it to determine with much accuracy. In other words, your GFCI outlet breaker might trip when you’re not actually in any danger.

The GFCI detects current that branches off from the intended circuit, even if the branches are small and harmless. This can include instances of a wire making contact with another component of the receptacle, which can be completely innocent. When the cause of a trip is a passing occurrence, you should be able to reset the outlet breaker with a simple push of the correct button.

Outlets can get worn out and lose some of their effectiveness over time. This also applies to GFCIs. If your GFCI outlet is tripping much more frequently than it should, it could mean it’s nearing the end of its lifespan. This is due to GFCI outlets losing the ability to adjust to changes in current as effectively as they used to. The result is that trips begin occurring for reasons that were never a problem in the past.

If your outlet breaker is tripping every time you use a hair dryer, and it never did that before, it’s a sure sign you have a bad GFCI outlet. If this becomes the case, it’s important to get it replaced as soon as possible! These outlets are too crucial a safety measure for you to delay on getting a new, functional one.