There are many ways that electrical fires can start in the home, any many ways they can be prevented. With all the tools on the market it can be hard to know what you should be using to protect your home. One important tool that you can use to prevent electrical fires is an arc-fault circuit interrupter (AFCI). An AFCI could prevent electrical shorts and damage on circuits around your home.

Arc faults occur when electricity leaves the circuit and the current travels to a different pathway. This can occur if a wire is cracked, cut, or broken. When the wire becomes exposed the electricity can travel out and into the surrounding objects. When the electricity makes contact it will heat up significantly which can cause a fire. If this arcing occurs in your home, chances are the surrounding materials are wood or insulation. Once an arc fire starts, it can do significant amount of damage before you are made aware by the sound of your detector.

An arc-fault circuit interrupter (ACFI) can be installed on receptacles and circuit breakers to shut off the flow of electricity when it detects an arc about to occur. Because arcs are a sudden surge of power, standard circuit breakers may not shut off before the arc occurs as they are designed to prevent short circuits and overloads. Sudden surges of power in the electrical system can occur when devices and appliances, like a vacuum cleaner or light switch, are turned on. These are normal occurrences, which will be detected by the ACFI and allowed. But the ACFI also monitors the circuit for dangerous arcing and is ready to shut off the flow of electricity immediately when it occurs.

While many homes in Canada may have ACFIs installed, it has not always been a requirement. For homes that have been built before new electrical code requirements in 2002, there are likely no ACFIs installed in the home. This makes you vulnerable to arcs that are more likely to occur in older homes due to aging wiring. Currently, it is standard to have ACFIs installed on all bedrooms.

Our Expert Elections are experienced in installing AFCIs. Our electricians can detect if there are AFCIs currently installed in your home, and which points of your electrical system are critical and should have an AFCI installed. If you are unsure about your homes protection, call your local Expert Electric at 604-681-8338.

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Your home’s circuit breaker is a valuable line of defense in protecting your home. All your electrical appliances rely on your home’s circuit breaker which makes it that much more important. Replacing your circuit breaker can be such an economical investment in protecting your home. Dealing with flickering lights, poor performance from your appliances such as your stove or microwave, and a smoking scent from your panel are just a few of the warning signs when it comes to your circuit breaker. Learn more about the warning signs so you can avoid a catastrophe and replace your circuit breaker before it’s too late.

One way to tell if you need a circuit breaker replacement is to sniff around and see if you smell a burning odor coming from the panel. If so, that means the wires and insulation have become overheated. Ultimately your circuit breaker is failing to protect your home from an electrical short elsewhere. Shut off the main power to the house immediately and call an electrician for an home, potential buyers are going to be hesitant to put down an offer. Everyone wants to purchase a home that is safe and secure, which is why an upgraded breaker is that much more valuable.