The start of the new school year for kids means cooler weather is just around the corner! The Farmer’s Almanac is predicting another wicked cold winter, with our area getting cold, wet, and white…yikes!

Since winter is often the time when energy bills are the highest, we thought we’d share a few of our favorite energy saving tips to help keep you comfortable without breaking the bank this season. Keeping your electrical system safe is important, especially when snowstorms threaten to knock out power (and with it, heat!), so read up and remember: for all your electrical service needs in Maryland, Virginia, and Washington, DC, call Kolb Electric!

If you use a heat pump to heat and cool your home, you probably already know that they’re among the most efficient HVAC systems you can install—if you use them correctly.

During the winter, set your thermostat to the lowest setting you’re comfortable with and keep it there for the whole season—the U.S. Department of Energy (DOE) recommends 68 F, but ultimately this is up to you. Every degree you set the thermostat lower will lower your energy use, so if you like to bundle up, this is a great way to save!

Most heat pumps come with a backup heating system to give you a little extra heat if the pump itself can’t make it. Unfortunately, electrical resistance heat is very inefficient and can get expensive if you use it too often. This electrical backup kicks on when you turn your thermostat up, which is why it’s best to set your thermostat once during the winter and then leave it there.

The one time when you should adjust your thermostat is when you’re leaving the house for a few days—the backup heat will kick on when you come back and set it back up, but the amount you save from being gone should offset that.

With any other form of heat, you’re free to adjust the thermostat as needed throughout the day. Again the DOE recommends 68 F as a balance between comfort and efficiency, but you may want to set the thermostat lower during the day when you’re not home and higher when you are home (a programmable thermostat makes this easy!).

If you’re going to be away and want to set the thermostat down, don’t go lower than 55 F. If your home gets too cold, your pipes could freeze and create a very messy situation for you when you return!

Whatever type of heating system you use, make sure you keep your filters fresh all season. Change them about once a month during times of peak heating system use. Just keeping on top of this can save you as much as 10 – 15 percent on your monthly energy bills!

Your water heater is usually the second largest energy consumer in your home, next to your heating system. Saving money on your water heating is not too complicated:

Fix all leaks when they happen! Even what looks like a small leak can waste hundreds of gallons of water per month—all of which you still have to pay for.

Take showers instead of baths. A normal shower uses about half the water of a bath, which also means less water heater needs, lower sewer costs, etc.

Use a flow restrictor to maintain water pressure while minimizing the amount of water use.

Don’t let the hot water run when doing dishes, shaving, or brushing teeth.

Like a heat pump’s backup heater, a space heater uses electrical resistance heat that can be expensive to operate. That said, they can be useful to heat small areas like the bathroom for short periods of time. In fact, it can be much cheaper to use a space heater in the morning than to raise the temperature in the whole house for a short period of time.

When you are getting any electrical work done in your home, you want to make sure that the job gets done in the best possible way and that the best materials and workmanship are used in the work too. This is exactly why you conduct a certain amount of research online and try to zero-in on a credible and well-established company. However, this can sometimes be easier said than done and you may scour several sites and still not be sure which company you should contact for the work you need done.

We understand exactly how difficult this decision can be and so we have put together this list of things you should consider while choosing a residential electrician:

This isn’t very difficult to decipher. In Australia, when it comes to electrical jobs, the only things you are legally permitted to do are to change your light bulbs & operate the electrical appliances in your home, for what they were designed for. If you need any other electrical work done, beyond that; you would have to hire the services of a licensed and certified electrical contractor. This includes even the small things such as:

Even when you feel that certain jobs are very basic and that you will be able to tackle them yourself, keep in mind that electrical jobs are very risky and dangerous; and a single wrong step can cause an electrical fire and pose a risk to life and property. This is exactly why it’s important to hire the services of a credible electrical company.

They will work safely, use the latest and most advanced testing and work tools and ensure the work is done safely and in line with the applicable legislation in the state. In addition, the work has to be done as per the Australian Standard Wiring Rules. The electrician is also required to provide a certificate of compliance for the work they have handled for you.

In the current day, every state and territory requires that electricians should hold a valid electrical license to carry out any work. Most of the states also require that the electricians be R.E.C’s (Registered Electrical Contractors), before they are permitted to handle any electrical work or run an electrical contracting business.

For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

The ENERGY STAR® Partner of the Year Award. Sea Gull Lighting’s focus remains on delivering on-trend, high quality lighting products with unparalleled customer service and best-in-class availability. For almost 100 years, they have built strong relationships and earned a reputation among channel partners, builders, contractors and homeowners to be among the very best. Sea Gull Lighting looks forward to the evolving business landscape, and with its continued commitment to serve, and to listen and learn from its valued customers, is poised for success as it soon enters its second century of operation.