MyLEDLightingGuide.com’s

Each kit measures 6.8″ L x 4.9″ W x 1.5″ H and weighs about 1.5 lbs. These lights come in 100-277 (Standard) | 347-480 (High Voltage), and can be installed in environments ranging from -30°C to +45°C. Three color temperatures are available: 4000K | 4500K | 5000K (Standard). MyLEDLightingGuide stocks 5000K, but can order in 4000K or 4500K.

 

These retrofit kits are specifically designed for smaller fixtures that have bulbs up to 400W. Three models are available to match the right output with your application. These lights fit well into wall packs, highbays, parking lot lights, canopy lights, low bay lights, flood lights. In fact, the only limitation is the fixture itself.

 

 

2 models make up the Large Series of LED Retrofit Kits, the 150W and 200W. These lights are powerful enough to retrofit and replace Metal Halide and High Pressure Sodium bulbs all the way to 400W-750W. These lights are designed to provide more than the normal 400W retrofit replacement kits. There are times when more light is needed, and these kits were designed to provide more light than our normal retrofit kits designed to replace 400W Metal Halide

 

 

Conclusion

Save

Save

Save

Save

Save

We offer photocontrol LED canopy lights for security lighting, parking garage lighting, gas station lighting, low-bay warehouse lighting, drive-thru lighting, and more. Using powerful LEDs, the light fixtures emit 9,000 lumens of bright natural white light.

The 100-watt LED canopy lights are equivalent replacements for 400-watt metal-halide (MH) fixtures but are designed to last three times longer. A photocontrol option is available to lengthen LED life span even further. The tork light-detecting sensors are designed to save energy by turning the light fixtures off during daytime hours. Shoppers can choose either a 120V AC or 208-277V AC tork sensor for the photocontrol fixtures.

 

 

 

 

 

 

 

 

These weatherproof LED lights are constructed of dark bronze die cast aluminum housings and shatterproof polycarbonate lenses. The LED canopy lights operate within a wide 90-277V AC range. Each surface-mount LED canopy light is equipped with a Mean Well constant-current driver as well as side and rear knock-outs that allow for various wiring options. A hassle-free five-year warranty fully protects against factory defects and malfunctions.

 

 

 

 

 

 

 

 

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

 

We are very proud of our LED Retrofit Kits – DesignLights Consortium came out with a new standard, Version 4, that allowed the most efficient LED Retrofit Kits a higher efficiency category. So be careful, there is no need to purchase DLC Standard LED Retrofit Kits when there are DLC Premium Qualified LED Retrofit Kits available. And this is important, because the more efficient the product is, the more you save. And the savings don’t end there. The whole reason for the more efficient standard was to offer larger utility rebates at time of purchase.

So you save 2 ways: potentially at time of purchase and over the life of the product. Let’s do the math, because the numbers don’t lie.