Electricity is something we use every single day, at home and in our workplace. Commercial and industrial establishments would never be able to function without it, and yet we take it for granted – at least until the time something goes wrong with it. While the electrical fixtures and fittings are all within sight, the wiring and other related installations are typically out of sight. This also means that we don’t really pay much attention to them at all.

What we don’t realise is that while most electrical issues seem like they have arisen out of the blue, there are almost always some warning signs. Electrical issues can result in electrical fires that can be extremely dangerous. Melted wiring is one of the commonest causes of electrical fires. There are a number of things that can lead to melting of electrical wiring, such as:

Electricity anywhere has an electromagnetic field; and the electricity flowing through the wires on your property is that way too. This electromagnetic field is at a certain level and that is why it isn’t really evident. However, at times there is an excessive build-up of electricity in the wiring on your property, which weakens the wires. If you don’t address this issue on time, the wiring will melt and result in arcing, and that is when you hear the crackling, hissing or buzzing sound emanating from wires.

All electrical installations are made to carry a certain amount of power load. Older structures tend to also have decades-old wiring; that is unable to bear the load of current-day, power guzzling electrical appliances and equipment.

If you run too many of these all at once on your property, it results in an overload in the system. Typically when this happens, the fuse connected to that particular circuit blows. If, for some reason, this doesn’t happen and the electricity continues to flow through the system, it will cause the old wiring to melt.

A short circuit is caused when a neutral wire comes in touch with a live wire. Just as in the case of a power overload, if this occurs, the fuse will blow and the electrical supply within that circuit will get disconnected. However, if this doesn’t take place & the electricity keeps flowing through the wires, they will get heated up and melt.

If you find anything out of the ordinary with the electrical installations in your home/commercial establishment, never defer calling in an electrician to check what the issue is. The signs to look out for are arcing in electrical installations, switches and powerpoints that are hot to the touch etc.

Attending to all these issues on time will ensure that you have less problems to deal with, later. Never forget that electrical issues can be very dangerous and the more you defer getting them checked, the more you endanger your safety and that of anyone who lives or works on your property.

The one way to prevent electrical issues from surfacing in this manner, is to opt for preventive electrical maintenance services. As part of these services, the electrician will come in at pre-decided intervals and thoroughly test all the electrical appliances, fixtures, installations and wiring on your premises. If he notices anything out of the ordinary, he will inform you about it and it can be fixed before the issue aggravates and poses a risk to life and property.

We at Allround Electrical are licensed and insured electrical contractors, and offer a range of electrical services to commercial and residential customers. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

Air conditioning systems are complex electro-magnetic appliances that can very easily have an electrical issue develop at one time or another. If there is any time that safety trumps convenience, it’s when you have an electrical problem. So, be sure to contact the professionals on our team if you suspect you have an AC electrical problem, as our staff is highly trained and licensed to do this type of work. First though, you should understand what some of the most common AC electrical problems are.

Your AC system houses 3 different motors: 2 fan motors—the condenser and indoor blower—and the compressor motor. Since your AC system functions on an alternating current, these motors require 2 capacitors—a start capacitor and a run capacitor—that helps your AC start up and maintain its electrical flow. When you run into an issue with either capacitor on any of the motors, then you’ll probably observe stuttering at start-up, intermittent operational problems, or even a total breakdown of the motor itself.

There are many wires running throughout your AC system. With natural wear and tear over the years, these wires can begin to fray, corrode or disconnect. This can cause issues with electrical flow and overall operation. Locating faulty wiring can be tricky and should only be left to trained professionals.

Your AC draws enough power that it requires its own breaker in your home’s electrical panel. Because of the intense demands on this system, problems can develop. Common issues are related to a breaker that is faulty, undersized, or loose. While loose breakers may be tightened, an undersized or faulty breaker has to be replaced by an electrician who has the knowledge of how to do so safely and accurately.

The electrical field is one that has seen a number of remarkable discoveries over the decades. One very important lesson has been the aspect of grounding of electrical currents. It’s true that we need electricity for almost everything in our daily lives and can’t even imagine a world without it. However, it continues to be one of the most dangerous elements on earth. If you haven’t already properly grounded your home’s electrical systems, you are taking a significant risk by not doing so.

Every electrical circuit has an active wire which supplies power; there is also a neutral wire which is responsible for carrying the power back. There is a third wire (grounding wire) that can be attached to the power outlets & the electrical appliances and devices; this wire is connected securely to the ground in your breaker box.

This third wire is the additional path that the electrical current can pass through to be safely returned to the ground, in case there is a short circuit; this prevents any harm being caused to anyone. In the event that a short circuit occurs, the current flows through into this grounding wire and it’s when you notice a tripped circuit breaker or a blown fuse in the electrical main board on your property. If this wire hadn’t been grounded, it would have resulted in a fatal shock.

This is one of the most important reasons to ground electrical currents. It’s the best way to protect your family members from electrical surges when they are operating any electrical appliances in the house. In case a lightning strike causes an electrical surge on your property it can result in extremely high electrical voltages in your system. When the wiring has the proper grounding, all the excess electricity gets diverted into the earth, rather than burning everything that’s connected to your electrical system.

When your installation is grounded, it becomes very easy for the power to get directed exactly to where you need it; this allows the electrical currents to efficiently & safely travel across your home’s electrical system.

A properly grounded system makes it much easier for the power to be distributed in the right amount to the right places. This plays a significant role in ensuring that there is no overload in the circuits. The earth becomes the common reference point for all the different sources of voltage in an electrical system.

One of the primary reasons why grounding is extremely effective in keeping you safe is because the earth is an excellent conductor, and electricity always takes the path that has the least resistance. When you ground your electrical system, you are giving it a path that it can easily take, rather than into you; this can potentially save your life.

If your home’s electrical system isn’t properly grounded, you are just risking the appliances and equipment that are connected to your system, being burnt beyond repair. If the situation gets out of control that can also result in a fire risking your property and causing physical injury, sometimes even death.

If you aren’t sure about whether your electrical system has the right grounding, its best to call in a reliable local electrician to get it checked thoroughly. We at AllRound Electrical will check the system carefully and check it for any other potential faults as well. For more information, contact our friendly team at this number – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263