If you have ever went to the store to buy new light bulbs for the home or garage, you have probably been a little surprised to see an entire aisle filled with a variety of bulbs. It can be a little overwhelming. What kind do you need? Are your current light bulbs adequate or should you be using something else? When you start to read packages and look at various price points, it can all become a little confusing. The cheaper the better seems like a good plan, right? Wrong. You need to understand the differences in light bulbs and what they mean to you and your home. An electrician in Los Angeles, like those at The Electric Connection, will explain.

Incandescent Bulbs

These are the old bulbs we all became used to. You could by a pack of 4 bulbs for around a dollar. Unfortunately, they were simply not energy efficient explains an electrician. Los Angeles residents may be surprised to learn those bulbs would only last about 2 years if you used the bulbs only 3 hours a day. Most of the energy the bulbs used produced heat, which ends up being a fire hazard. These are the bulbs that have been phased out. Yes, you can still buy the smaller incandescent bulbs for your fridge and certain lamps, but they are no longer mass produced.

Compact Fluorescent Lights (CFLs)

These are the bulbs that have replaced the incandescents. They have that swirl shape that makes them difficult to put into some light fixtures and they do take a few seconds to heat up to their full power. The lights are extremely energy efficient and use 75 percent less electricity than the incandescent bulbs. You can save a great deal of money on your electric bill by switching to these bulbs. They also last about 5 times longer. If you have a light fixture that will not accommodate, consider having it upgraded by a Los Angeles electrician. Give The Electric Connection a call today and schedule your lighting upgrade.

We use electricity everyday of our lives; powering our televisions, lights, and appliances. While these may seem easy enough to turn on with one click of a button, the steps that go into powering these things can be complex. Here is a look at the systems that go into powering your home.

All electricity originates from the electrical utility company, BC Hydro in most cases. The electricity is transferred through power lines or underground lines to your home where it will go through the following series of connections:

Problems can occur at any point in this process. The inner workings of all these systems are complex and dangerous if tampered with. Expert Electric understands all the complexities and inner workings of your home electrical system. We can assist at any point to diagnose and fix any problems you may be experiencing.

By: Emilie Sims

Electrical outlets are found in nearly every room of the home, which represents a constant risk if you have small children. According to the National Fire Protection Agency, approximately 2,400 children each year suffer severe shocks and burns from inserting objects into the slots of electrical outlets. Additionally, there are an estimated six to 12 child fatalities each year related to this. Prevent this from happening to your family by childproofing the electrical outlets in each room of your home.

Also known as safe plates, these are additional covers that sit on top of your existing outlet and are held in place by a screw. There is a spring-loaded plastic cover that prevents your child from poking anything inside of the outlet.

Installing tamper resistant receptacles (TRRs) around the home provides a permanent solution to help reduce the risk of childhood shock and injury. TRRs, which look like ordinary outlets, are designed with small, spring-loaded receptacle plates that close off the slots, but open when equal pressure is applied to both sides. This design prevents children from inserting fingers or other foreign objects into the slots, and reduces risk of electrical shock or injury.

There are also several types of childproof electrical outlets that you can choose to install that will provide a permanent way to reduce risk of child injury.

This tamper-resistant outlet contains both a switch and an outlet to plug in devices. The dual mechanical shutter system blocks the insertion of objects into the outlet, increasing your child’s safety.

A ground fault circuit interrupter (GFCI) outlet can be identified by the “test” and “reset” buttons located on the receptacle. A GFCI outlet helps protect you from electrical hazards by shutting off the electricity circuit when it detects an imbalance. The National Electrical Code requires these outlets to be installed in water susceptible areas, such as the kitchen and bathroom. Test these outlets once a month to ensure they are working properly.

These receptacles look similar to standard ones, but the two outlets have the ability to spin 360 degrees. These outlets also allow you to use two large plugs at once.

Visit the Electrical Safety Foundation International and the National Fire Protection Association for more information on keeping your family safe around electrical outlets.

Lighting is a critical aspect in a number of industries such as manufacturing, mining, marine, packaging, and even sports. Electrical fixtures for such industries are designed for heavy duty performance and can last even in the most adverse conditions such as extreme temperatures and climate.

Apart from ensuring proper lightening and enhancing the output, electrical lighting also helps in maintaining safety in your workplace. If you have a well-lit work space, then your workers can avoid unwarranted accidents like stepping on sharp tools, bumping into equipment, etc. You can use a wide range of electrical light fixtures such as LED, magnification lights, fluorescent lamps, halogen machine lighting, etc.

You must choose the right light fixtures based on the environment you work in and the lighting demands of the space where you need to install them. Let us look at some industrial lighting fixtures that are available.

5 Types of Industrial Lighting Fixtures

In industries like mining, transportation, steel, marine, etc., there are high risks of explosions which you cannot overlook at any cost. You have to make sure that the lighting fixtures have the ability to withstand the heat and pressures that are generated by an explosion. Explosion proof fixtures meet some of the most stringent quality standards of the National Electric Code.

Indoor fixtures can be installed in a number of indoor work areas like workshops, workstations, bays, etc. As different work environments have different requirements for lighting systems, it would be ideal to contact a supplier who can offer you customized lighting requirements. Ensure that the lighting systems are capable of withstanding harsh working conditions as well as extreme temperatures.

Roadway fixtures are ideal for places where you need high mast lighting. Safety is extremely important on the roads and is of major concern for the protection of all those present on the road, which is why you need a brightly lit road. You can control the amount of light generated by these roadway fixtures to make them brighter or dimmer, based on the time of the day they are being switched on.

Every sports ground requires proper lighting. It isn’t a pleasant experience for the spectators when they can’t clearly see what’s going on in the ground/field and it would equally hinder the players from performing well if the lighting is compromised. Regardless of which sport it is, be it tennis, football, cricket, basketball or rugby, flood lights are an indispensable part.

Places like nuclear plants, mining fields, oil rigs and underwater operations require high quality and failure-free lighting solutions. It is important that there are various kinds of light sources as well as lights so that the work doesn’t halt due to lighting failure of any kind. Ideally, you must not use regular industrial lighting fixtures in such places. Make sure the lighting you use are reliable, have a long life and have low maintenance costs.