One of the best ways to relax outdoors is by sitting in your own private hot tub. After a long hard day at work, a soak in the hot tub can help rinse away all the stresses of work and life in general. A hot tub is also a great way to entertain a few friends on the weekend. Once you have picked out the tub that you have been dreaming of, the next step is getting it set up and ready for you to enjoy.

Setup

Although you may be extremely excited to start filling your new toy up with water for that first use, hot tubs require an electrician. Santa Monica homeowners will need an electrician to help wire the hot tub to the home. These wonderful devices are not something you can simply plug into the patio outlet.

The tub or sauna will need to be hard-wired into the home’s power. Typically, because of the electric requirements, a dedicated breaker will be needed. Depending on the available service, you may need an additional breaker installed.

It is not uncommon for permits to be required for the setup and installation of a hot tub. An inspection may also be needed. A qualified professional will need to make sure the hot tub is wired correctly and safely. These are all things that will need to be handled by an electrician. Santa Monica residents can call The Electric Connection to discuss the setup of their new hot tub.

Maintenance

Like anything that is run by electricity, there are times when the unit will fail. Never try and fix the hot tub yourself. In many cases, you could end up voiding your warranty by doing so. If you ever run into trouble with your hot tub, call an electrician to take a look and save yourself time and money from a voided warranty. The Electric Connection is here to help you get your hot tub up and running.

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Electrical troubleshooting in Fairfax, VA can help fix those electrical problems that, while perhaps not perceptibly major, can seriously hinder the performance of your home’s electrical fixtures. We’ve all had that one electrical problem in our homes that never seems to go away, leaving us in a state of constant frustration. At the worst, these problems can impact how we function in our homes on a daily basis, and even pose a threat to our safety.