CCT indicates the hue and tone of white light emitted from a specific bulb or fixture. It’s measured in Kelvins (K), which is similar to degrees in Celsius. Different temperatures on the Kelvin scale represent different colors. For example, light at 2000K-3500K looks more orange/yellow and is called ultra warm or warm white, and as temperature increases in Kelvins, color changes to more of a “paper white” known as natural or neutral white (between 3500K and 5100K) and finally into a bluish-white known as cool white (5100K+).

As a light source’s color temperature increases, brightness often increases. While shopping for LED lights, pay close attention to the color temperatures that are available for any one bulb or fixture. Choosing a warm white bulb with a color temperature around 3000K might mean sacrificing some brightness. Whereas, if you choose the natural white version, it’s likely that it will have a higher output.

Any room can benefit from light strip, globe bulb,

In order to understand nanometers, you must first understand the electromagnetic spectrum and wavelengths. The electromagnetic spectrum is the entire range of invisible and visible light, and a wavelength is the distance between peaks of light waves. Wavelengths are measured in nanometers, which are simply units of length that indicate colors of light within the spectrum. Nanometers will tell you how red, green, yellow, purple, etc. a light source really is. These measurements start lower at ultraviolet and increase from green to blue, yellow, orange, and then red. The wavelength of a colored light can be found in the light’s specifications table.

MR16 beam angle in degrees (left to right): 36, 24, 15

Fixtures or bulbs that emit wide beams, such as BR LED bulbs for can lights are great for areas that require a lot of light, such as basements, kitchens, or living rooms. Narrow beam angles like those from can lights with MR LED bulbs are best for highlighting decor or small areas. Globe bulbs, such as G30 LED vanity bulbs, have 360-degree beam angles, which means that they throw light in all directions. Globe bulbs are the perfect choice for centralized light fixtures.

Electrical motors are devices that convert electrical energy into mechanical force. They operate on the principles of electromagnetism, using the interaction between winding currents and magnetic fields to generate force. Some motors, like those used in the transportation industry can reverse the effect and generate electricity too, converting force into electricity.

Many industrial plants attribute over 70% of their power consumption to motors, so even a slight increase in efficiency can dramatically cut energy spending and improve profits too.

When you are shopping at the home improvement store, many of the projects look so easy. It seems fairly simple to change out that tired old light fixture in your bedroom with a more modern one that matches your particular style. The box comes with everything you need, so how hard could it be? It can actually be very hard and extremely dangerous for the novice who has no idea how to connect wires safely. It is always best to be safe and hire an electrician in Burbank, like those at The Electric Connection, to complete any project that involves electricity.

Although those new light fixtures appear complete, there are still some serious safety precautions that need to be taken to ensure you don’t get electrocuted. There is also the concern of wiring the fixture incorrectly, which could be a serious safety hazard explains a Burbank electrician. When you hire a professional to take care of the installation, you get the peace of mind knowing it is going to be done right and it is going to look great once its complete. Light fixtures can be heavy and if you do not get them positioned just right, you risk them falling down or becoming loose.

Upgrading your light fixtures is something many homeowners do for aesthetic reasons, but there is also some cost savings involved in many cases. New fixtures are often designed to accommodate CFL bulbs or the much more energy efficient LEDs. You will save money on your electric bill by updating your light fixtures with the help of an electrician. Burbank homeowners that have found the perfect light fixture and want it installed can call The Electric Connection. Never risk your safety or the safety of your home by taking on an electrical job is you don’t have the knowledge or experience.

By: Jason Lee

Ever look at old family photos? You remember, the faded picture with the brown couch, wood panel walls and yellow(ish) shag carpet. Most people look at the photo and see these things and the smiling faces of the family. We look at these photos and are taken back to a time when another generation set the rules.

But looking a little more closely at the photo of years gone by, you might notice something that is still around the old house and room today. Hidden in the photo, but still prominent in the room where the photo was taken, is that old, painted over two prong outlet. You know the one. It had the gaudy horse-carved table lamp plugged into it. At one time it was white but it was painted to match the wall color when the paneling came down and the sheet rock went up. You changed the entire look and feel of the living room over the years but that outlet stayed the same. And, why not? It only served one function and how often does technology change, right?

The two prong outlets had been the norm for so long and years of remodeling and redecorating never seemed to affect the outlets. No upgrades were required. Just slap a new cover on it and it was good to go. When “new technology” came about, we were ready with the “cheater” outlet that still enabled us to use three prong electronics with the old two prong outlets.

But soon everything seemed to require three prong outlets and that left us having an abundance of those grey three-to-two prong adaptors in our junk drawer.

Old photos are great to look at and reminisce about past times. But, we are constantly changing and our technology is expanding at a rapid rate. Modern times call for modern outlets. Two prong outlets had a good run and they served a valuable purpose, but there comes a day when the grandfather, who led the head of the family for years, has to retire and give way to change and a new way of doing things.

Outlet changes should be made because today’s outlets give us piece of mind, safety and convenience. Safety has been a top priority for new outlet designs. All modern homes, those built after 2008, should have child-proof outlets installed.

Today’s modern three prong outlets come with a variety of features for convenience and safety. Although the days of the two-prong outlet are numbered, modern GFCI, child-proof and combination outlets will never forget their roots.