Electric cars are the wave of the future as gas prices continue to skyrocket. More and more people are realizing the benefits to owning an electric car and trading in their gas guzzlers in favor of one of these cars that requires charging before it will result in any real savings. Charging stations are becoming more popular, but for the most part, people will need to charge their cars at home. Which brings up another issue—can you plug an electric car charger into your existing outlets?

While the immediate answer is yes, there are a couple of things you need to take into consideration before you unplug the radio in your garage and plug in your car charger. Depending on how you answer the following questions, you may need an electrician in Pasadena.

1-Is the outlet capable of handling a charger? This will depend on the kind of charger you have purchased for your car. The chargers commonly used at home will require a 240-volt outlet. This is probably not something you currently have in your garage. You will likely need the services of an electrician. Pasadena residents can rely on The Electric Connection to install a new outlet dedicated to charging your car.

2-Is the outlet reliable and in good working condition? This is typically not something you can verify simply by looking at the outlet. If the breaker trips when your charger is operating, it is a good indicator you need the help of a professional. Considering how much the charging stations cost, and not to mention the cost of your home, it is best to have an electrician come out and do an electrical inspection to ensure the outlet can handle the charging station. You do not want to risk an electrical fire due to a faulty outlet.

Temperatures are falling rapidly, and some regions of the country have already seen snow. With winter settling in, renters and homeowners are cranking up their thermostats to stay warm and cozy while bracing themselves for a big bump in utility bills due to heating costs. Savvy consumers looking for a way to save money without sacrificing comfort might ask: Can I cut down on my winter heating budget if I lower the thermostat and make up the difference with an electric space heater?

Fuel Matters

Savings are possible, though, no matter what kind of central heat you have. According to Grist magazine, if you are using a space heater for less than one half to one third of your living space, and you lower the temperature on your thermostat for the rest of it, you can save money even if your main heater is an efficient gas model. So if your family spends most of its winter indoor time in just a few rooms of the house, go ahead and experiment with a portable heater and see if you can reduce your bills.

For even more savings, don't forget to take other steps to winterize your home, like sealing any drafty areas and hanging heavy curtains. Wear a sweater, too, so you can minimize the amount of time you need the extra boost in warmth from your heater.

Finally, avoid kerosene heaters if at all possible. They pose a greater fire hazard than electric models and can affect your indoor air quality. If they are your only option, take extra care to comply with the safety instructions. Only refuel outside and be sure the indoor space where it is used is properly ventilated. Some kerosene heaters are even illegal in certain areas, so be sure to check your local laws before you buy.

The federal Energy Star program does not rate portable heaters, but the Energy Department does provide more information about specific types of space heaters.

Your local Mister Sparky® electrician is always available to help with advice on choosing and using your space heater safely.

A safety switch is essentially a device that very quickly switches-off the electricity in case any electrical fault is detected. In effect, it reduces the risk of injury & death caused by contact with electricity. Current day safety switches are very different from the ones used even up until a decade ago. Today, it’s mandatory to have these installed in buildings where any kind of electrical addition or upgrade has taken place.

Apart from this, safety switches are also needed for power outlets that that supply electricity to mobile homes like caravans etc. It’s not mandatory to have these safety switches in older homes; however, the recommendation is that you should consider getting them installed. It is one of the most effective ways to protect your family & yourself from electric shock.

ELCBs or Earth-leakage circuit breakers are safety devices used to prevent shock in electrical fixtures which have high Earth impedance. The current installations use the circuit breakers that directly detect leakage in current. Here are some features of an ELCB:

RCDs or RCCBs are essentially modern electrical wiring devices which quickly disconnect a circuit if they detect that there is an imbalance in the current between the energized conductor/s & the return conductor. They are designed to immediately switch-off the electricity supply when the electricity leaking to earth is detected to be at harmful levels. These devices offer very high levels of protection from electric shock.

Voltage Earth-leakage circuit breakers were first introduced around 60 years ago, while the current ELCBs were launched only around 40 years ago. For a very long time, voltage-operated ELCBs & differential current-operated ELCBs were both called ELCBs; this was because it was a far easier term to remember. However, as expected, this common name caused a significant amount of confusion within the electrical industry.

If someone accidently used the wrong one in a particular application, the installations may not get the kind of protection it needed. It was to eliminate this confusion that the International Electrotechnical Commission decided that the differential current-operated ELCBs will be termed as RCD (residual current devices). Any current that’s over & above the load current is referred to as the residual current.

ELCBs have a number of disadvantages such as:

Today the RCD is preferred means of providing effective shock protection. The term is also most widely used across the globe.

For more information about RCDs and the best electrical solutions, call Allround Electrical at 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

One of the biggest challenges faced by electrical engineers, while designing and installing circuitry, is ensuring that electrical fittings can accommodate different plugs. The terms ‘electrical outlet’ and ‘electrical receptor’ are interchangeable, and they do a lot more than just provide electrical connectors for devices to plug into.