Just a few years ago, an energy efficient LED bulb might have cost you $20 or more. But today, you may be able to get as many as six bulbs for that price, and consumers are taking notice.

LEDs were always extremely energy efficient and long lasting -- the high upfront cost was the last thing holding them back from being the obvious choice for most household lamps and fixtures. But while we waited for those prices to drop, many consumers turned to CFL bulbs -- the curly ones -- as a more affordable way to reduce their energy consumption.

Now that LEDs are so accessible, some homeowners are upgrading and wondering what to do with their collection of CFLs, some of which may have thousands of hours of light left in them.

Managing the Mercury

The primary reason why CFLs need to be handled and disposed of carefully is because each bulb contains a small amount of mercury. The mercury content is so low that you don’t need to worry excessively about health risks in the event of a broken bulb, but if thousands of CFLs pile up together in the same landfill, the combined mercury content could prove hazardous. Even in trace amounts per bulb, the risk of soil and water contamination is real.

To avoid this problem, every CFL bulb should be disposed of at a recycling facility, whether it’s broken, whole, burned out or still good.

Recycle Right

Not every recycling facility accepts CFLs. If you have curbside recycling, check the service provider’s website for information specific to CFLs. It may be that they’re able to collect and recycle these bulbs, but only if they’re packaged separately for disposal. Some facilities may require you to deliver CFLs yourself.

In addition to municipal recycling centers, CFL recycling is offered by many business, including hardware and electronics stores. If you’re looking for your nearest CFL recycling location, use Earth911’s recycling search tool.

Accidents Happen

CFLs are made of breakable glass -- a fragile barrier containing the mercury vapor within. Because of the low mercury content, you don’t need to call out the hazmat team if you accidentally break a bulb. But as a precaution, you should still treat cleanup more seriously than you would with an ordinary incandescent bulb.

If a CFL bulb breaks, immediately clear the area of people and pets. If possible, open a window or door to ventilate the room. Turn off the HVAC system so that the mercury isn’t circulated throughout the home.

When it’s time to clean up the mess, leave the vacuum behind. Like your HVAC system, it can blow the mercury vapor around your home. Instead, sweep up all the glass and bulb components into a dustpan and deposit them into a plastic bag.

Use a damp paper towel to wipe down the area, and if necessary, use sticky tape to collect small glass shards. Place all cleaning materials into the bag and seal it up. Afterward, take the bag to your nearest CFL recycling location for safe disposal.

And if you need help with more substantial lighting issues, don’t take the risk of playing with electricity alone -- call up your local, licensed electricians.

When your car isn’t running right or you have a leaky faucet, you may try and diagnose and repair the problem yourself. These are fairly innocent symptoms and a number of people can safely take care of the problem just by using Google or talking to somebody at the auto parts store or their local hardware store. Unfortunately, electrical problems in the home, even those that seem relatively simple, can be extremely dangerous for the average person to fix. It is absolutely imperative you call an electrician. Santa Monica homeowners who suspect they have something going on with the electrical in their home can call The Electric Connection.

Sometimes, the obvious problem is just a symptom of something much bigger. A light switch that doesn’t seem to work or an outlet that is loose or makes a popping noise may seem like no big deal, but it is. It is hard to say what is happening without an inspection from a trained and certified electrician in Santa Monica. It could really be a quick fix that requires a little tightening of the wires or a replace of the switch or outlet. It could also be an indication of faulty wiring or wiring that is old and brittle.

There are plenty of other scenarios that would require you to call a Santa Monica electrician. If you want new outlets, additional outlets or new light fixtures, you will want to leave the job to the professionals. This ensures the job will be done right and you can sleep better at night knowing it was handled by someone who has been through extensive training and been certified. It is too risky to ignore the problem or attempt to diagnose it if you don’t have the knowledge. Give The Electric Connection a call today if you suspect your electrical wiring may need a little help.

Take a few minutes to look for and correct electrical hazards in your home. It does not take too long to check the insulation on a table lamp cord, check for the correct wattage light bulbs and install a GFCI (Ground Fault Circuit Interrupter). Take the time. It will prevent an electrical safety hazard and save you and your loved ones lives.

Unsafe conditions such as overloaded circuits and damaged insulation as well as the misuse of extension cords and electrical devices create fire hazards and may result in serious electrical injury.

Studies of residential electrical fires show that the majority of serious fires could have easily been avoided. The conditions that caused the fires probably would have been detected by an electrical inspection. These problems were not detected or corrected because no inspections had been made for several years. In a number of cases homes ranging from 30 to 100 years old had not been inspected since they were built. A safety inspection should be performed by a qualified licensed electrician.

One good tip to determine when your electrical system was last inspected is to examine the door and cover of your electrical panel. The panel should contain a label or tag with a date, a signature, or initials on it. If there is more than one date, the most recent one should be the date of the last inspection. DO NOT remove the service-panel cover. This is a job for a qualified electrician. If the date is older than ten years, its time for a inspection and correction of any problems that show.

Call us for help at 808-647-0599

The end of the month has arrived, along with that same old utility bill. The cost of electricity can be a huge dollar amount, especially in larger homes with larger families. The utility bill has become just a part of life. Driven by the energy consumption of fridges, washing machines, lighting, and so much more, the electricity consumption of your home is dependent upon many things that often cannot be helped. However, there are a few household items that take up a surprising amount of electricity that you may not have thought about! Changing the way that you and your family uses these 5 common items could actually make a difference in that monthly bill in your mailbox! Here’s a list of these sneaky electricity users and some suggestions on how to decrease their energy use.

Personal electronics are a part of our everyday routine, whether it is our smartphones or our laptops. There’s no avoiding charging your device, but between 100% battery life and the idle time it spends charging afterwards, it becomes a major energy consumer. Leaving your cellphone or your laptop plugged in after it has reached a full charge still pulls in a decent amount of electricity. This does no good for your electricity bill, and it actually is worse for your device as well. Leaving your electronics plugged in past the full charge does damage to its long-term battery life.

The Solution: Immediately disconnect your electronic device from its charger when it gets to 100%. Unplug the actual charger, then do it all again when it’s time to charge again. Don’t plug in your devices at night when you go to sleep—that’s 8+ hours of idle charging time that racks up the dollar signs on your electric bill.

Xboxes, PlayStations, Wiis…the number of consoles that are available grow every day, providing entertainment and family fun. However, whenever those devices are on and not being used, it sucks up a lot of electricity to keep it powered.

The Solution: If you’re going to step away, turn the console off. Never let it linger and go idle, as this can use unnecessary energy. Unplug these devices when you travel, as well.

Surprisingly, your DVR or cable box can use as much energy as your refrigerator: one of the largest energy consumers in your home. These devices are always in standby, waiting to be used, which means that they constantly pull in energy just in case you press the On button on your remote. So not only do they use energy when they are on as you are enjoying television, but they are also using energy when they are off.

The Solution: Like the consoles, turn off the TV when you step away. Then unplug the actual DVR or Set-Top boxes when you know you aren’t using them or are traveling for a period of time. This could save you quite a few dollars on your next bill.

Summer time in Colorado means lots of dry heat. Especially if you do not have an AC system, like most older homes and apartments have, then ceiling fans are your only source of cool air. However, when they are big electricity users, so if you can help it, switch them off.

The Solution: Don’t keep the fans on for long periods of time, like when you are out of the house, or at night time when you’re sleeping. You could also upgrade to a more energy efficient model of ceiling fans, which could save you some money as well.

Just like DVRs, microwaves use energy both when they are on, and when they are off. When you’re not using your microwave, it sucks in constant amounts of energy to keep the buttons lit and the clock on. Then the energy levels jump to an all-time high when they are in use.

The Solution: Unplug your microwave when you’re not using it. Keep electricity levels low by only using the microwave when necessary. You could do this by doing things like avoiding defrosting meat in the microwave—letting it sit on the countertop for a few hours instead.

Though they seem small, these 5 household items are mighty when it comes to electricity use, even when they are not being used. If you’re trying to cut down your electricity bill, or want to be more energy efficient, these small changes in the way that you use these everyday items could make a huge difference in the long run.