One of the easiest ways to dress up your space and update the style is by changing your chandelier. Before you run out the door in search of the perfect chandelier, make sure you know the dimensions of your space. An appropriately sized chandelier should serve as a beautifying focal point that fits seamlessly into your overall design scheme.

For a room without furniture: Add the length and width of your room in feet, and then convert that number to inches. For example, a room that is 12 feet by 14 feet (12 + 14 = 26) would require a chandelier this is approximately 26 inches wide.

For a room with furniture: If you already have a dining room table in the space, the width of your chandelier should be about a foot smaller than the width of your table. This will leave a 6-inch clearance from the outer edge of the chandelier to the table’s edge.

The bottom of your chandelier should rest at least 30-34 inches above the tabletop. Adjust according to personal preference, fixture style and ceiling height. It is okay to hang your chandelier a bit higher in dining rooms with cathedral ceilings.

Chandelier height should be about three inches for each foot of ceiling height, so for a room with a standard 8-foot ceiling (3 x 8 = 24), choose a chandelier with an approximate height of 24 inches.

It’s exciting to deck out the front yard, the house and of course all over inside the home with pretty holiday decorations. Bright lights and big, extravagant moving decorations are something many homeowners take pride in. For some, it is a bigger is better. There is certainly some friendly competition between neighbors, which can be great for visitors who love to see the grandeur. However, there can be some safety concerns when that must electricity is being used. One of the most important things to remember this season is electrical safety. Your electrician in Beverly Hills wants you to be safe this season. The team at The Electric Connection can help make your holiday decorating easier and safer.

Extension cords can help connect those lights and big decorations, but you want to be sure you use the right cord for the job. Outdoor electrical cords are specifically designed to withstand the elements. Never use flat cords that are only to be used outside to try and plug in lights outside. Stick with the big, heavy round cords that are typically 3-prong.

Never connect more than 2 cords together. Ideally, you will only want one cord connected to a light socket. If you find your cord is simply not long enough, call an electrician. Beverly Hills homeowners can have additional outlets installed in the outer edges of their yard and landscaping, which makes decorating a breeze and can prevent having to use an extension cord altogether.

Never connect more than three light strands together. This could overload the circuit. LED strands are a little more forgiving because they take very little energy to run. Again, call your Beverly Hills electrician to install more outlets if needed. It is cost effective and makes decorating a breeze. Give The Electric Connection a call today if you have questions or want those additional outlets before it is time to deck the halls.

The controller keeps on monitoring the application requirement in a continuous control loop. It then commands the inverter to produce the required voltage and frequency to meet the application requirements. To do this, the controller, comprised of a microprocessor, takes the input signal from the sensor and compares this with a reference signal. It then generates the appropriate control signal for the inverter to vary its output power.

In a typical application, the controller will monitor process parameters such as pressure, flow rate, temperature or liquid level. For example, an oxygen sensor in a boiler provides a signal to adjust the speed of the fan and control the amount of oxygen in the boiler system.

Today’s drives, using microprocessors, semiconductor power switches, and SMDs are now smaller, compact, cheaper, more reliable and efficient. A typical drive will also include a filter to suppress harmonics generated when converting the DC to AC voltage.