Many homeowners ignore the precautionary measures that have been detailed in different governmental policies, for different electrical installations. There will be times when you will be boggled as to why the inspector has failed your electrical inspection. There are many reasons for a failed inspection, which are very common and generally ignored by the house owners.

To understand the various electrical loopholes that are left by contractors, it is extremely important and necessary to learn about electrical inspection in general.

What is an Electrical Inspection?

An electrical inspection refers to the thorough checkup of the electrical connections and wiring installed in your home.

Who is an Electrical Inspector?

An electrical inspector is an authorized person from the government and municipality who is responsible for checking the electrical connections to ensure they comply with the law codes and requirements in the area.

Why is Electrical Inspection Important?

There are many reasons behind the necessity of getting an electrical inspection done. Some of the most common ones are:

How to Prevent Different Problems during Electrical Inspection?

Your mind just might be full of questions as to why you failed an electrical inspection. While the reasons may vary, it is always better to know what to do before an inspection to avoid failure. Some of the main points are:

As a facility manager or building owner, it is nearly impossible to know everything about everything in your building. But it is vital to know something about everything, and that goes for your facilities lighting system too. Whether you manage a warehouse, factory, or other industrial sized building or space, the lighting is a huge factor of many things including safety, productivity, and consistency in the work in your facility.

So while you don’t need to know every facility managers and building owners should know about there lighting system and how lighting can make all the difference in various amounts of ways.

1. Not all lights are created equal. This is an obvious one, not all lighting technologies are created the same and all output at different levels. Firstly you have lighting technologies that are less efficient than others. Such as metal halide and HPS which are 2-3 times less efficient than LED technology is. Then you also have efficiency based on a “product to product” basis. For example; while LED is the clear winner in efficiency over metal halide (and really any other lighting technology), one LED product from one company isn’t going to be the same as the next company’s LED product. This is where you really need to dig deep and find the company that offers the most efficient lighting products over all other companies.

Key takeaway? First, understand that LED is the most efficient in a general sense, but also understand that each company and product varies on its own personal efficiency and you should always do your homework before going with one LED product over another!

2. New lighting system upgrade costs can be reduced with rebates. This is only a true statement when you are buying commercially qualified lighting products that are DesignLights Consortium qualified. return on investment overtime by decreased energy costs associated with running your lights. Obviously this ROI period will vary depending on how long you run your lights per day on average, but especially in big facilities they almost always are used often and thus, provide a good and even quick payback period.

4. Create safer environments with a proper lighting system. With low quality light output, you create an unsafe environment that can cause various issues. Lighting fixtures that aren’t outputting the proper amount of light after a few years into there life is all caused reasoning to retrofit over fully replace.

Surely you have seen electrical outlets your entire life… but do you know how they work? Their purpose is so important, it can actually save your life. If you read our article last week, you will understand how the electricity has already arrived at the outlet. Grounded electrical outlets then take the energy from your home electrical system and make it available. Here is more about what they are and how they work.

In Canada we have the three-prong outlet that you are familiar with. The outlet’s left hole is smaller and it is the “neutral” slot. The right hole is slightly larger and this is called “hot”. The bottom hole is the “ground”. The electricity flows in a loop, traveling from hot to neutral. This means when you plug your television in the electricity will flow from the hot slot of the outlet, into your television to power it, and then out to the neutral slot.

You have probably noticed that some appliances have only two prong plugs and some have three. This is because some appliances need to be grounded. Electricity always flows towards the ground, and when the electricity flows into your body and into the ground, you experience electrocution. Instead of a body potentially absorbing this current, the grounder redirects the electrical current traveling into the outlet so you will not be hurt. Items that have metal casings, such as televisions and computers, will have their metal cases attached to the grounder so that a current will not accidentally run throughout the case and shock you when you touch it.

When electricity becomes unbalanced in the electrical outlet, the outlet will “trip” and shut off the flow of electricity. For example, if an electronic device comes into contact with water, electricity will escape into the water. Once the outlet detects that less electricity is coming into the neutral slot than what should be, it will shut down. This safeguard protects users from potential harm.

By playing or tampering with an electrical outlet, you can get hurt or severely injured. It is important to use the appropriate equipment and follow manuals before plugging in electrical devices. If you need to make changes to your electrical system you should consult a professional first.

If you’re longing for a bulb that’s going to save energy and that lasts, this LED bulb replacement guide is a great place to get a feel for the type you might need. Other than finding a bulb that fits the socket, has the correct voltage, and meets wattage requirements, there’s no list of rules as to what bulb you should use in a certain fixture. This guide shows that even the same type of fixtures can require or accept different bulb types. LED replacement bulbs are available in a variety of wattages, intensities, voltages, and with different base types; they can even emit different colors of light. You have the freedom to choose a bulb that fits your needs, and there are plenty of available options.

Clicking each picture below will direct you to a page of similar bulbs. Keep in mind, this post just touches the surface of available LED bulbs. If you don’t see what you need, use our site to see hundreds of lighting options.

Track light fixtures are found in many homes and allow for aimable illumination exactly where it’s needed. These fixtures almost always contain MR11 spotlight bulbs. In addition to track lights, these bulbs are often used in recessed, pendant, display case, and desk light fixtures. MR16 and MR11 LED replacement bulbs have GU10 or GX5.3 bi-pin bases and are available in a wide variety of styles with many LED configurations.