Fans in the attic? The idea at first may sound odd. We usually think of fans as blowing somewhere in our home where we can feel their effects, like hanging from ceilings or mounted in windows. Few people spend more time in their attic than they absolutely must, so it seems useless to install fans there.

However, attic fans can form an important part of maintaining the overall efficiency of your air conditioning system. If you’ve taken all the steps you can to keep your HVAC system working its best (regular maintenance, duct cleaning, changing the filter, proper insulation), attic fans will take you a step beyond. We’ll explain why putting in attic fans will benefit you.

Attics are both heat traps and heat escape routes. You can use insulation to stop heat from escaping in winter, but what about summer, when heat gathers in the attic and creates excessively high temperatures that will seep into other parts of your home? (Go up into your attic on a hot day and see what it’s like. It can be miserable. You don’t want any of that to get to rooms you actually use.) To stop summer attic heat, you’ll need attic fans.

Attic fans should be wired to a thermostat that will turn the fan on based on the temperature. This saves energy since you won’t have to keep the fan on constantly or continually check on it. The movement of air in the attic will lower the high temperature.

The first benefit is the most obvious: your home will not get as hot during the summer. On average, the temperature in the attic will decrease 50 degrees with a fan, which means a drop of 10 degrees in your house.

This not only translates into comfort, it also means savings on your energy bills. A cooler house requires less work from an air conditioner to cool it. You’ll spend less, and your air conditioner will not receive extra stress that will lead to repairs and possibly an early replacement.

Attic fans will also extend the life of your roof. Rising moisture in your home will get into the roof, eventually creating mold in the insulation and the roof material. In winter, the freezing moisture can be extremely damaging. Attic fans move moisture away and keep it from settling.

Business owners have a responsibility to their customers and employees to keep them as safe as possible. This means it is imperative a business owner or manager chooses contractors with a good reputation. When you are hiring a person to come into your business to perform work, that person is a reflection of your business. You always want to put your best foot forward and make savvy, smart decisions when it comes to calling the right company to take care of any electrical needs you have. Business owners in need of a Los Angeles electrician can rely on The Electric Connection to fulfill their commercial business needs in a professional and timely manner.

It is always a good idea for any outside contractor to wear a uniform which identifies him or her as an employee of another company. This cuts down on customer confusion. A clean, attractive uniform is also important to the image of a business. Employees and customers will be able to easily identify the electrician. Los Angeles businesses need somebody who will not interfere with daily business operations whenever possible. Commercial electricians will also need to have a reputation of being prompt and have a flexible schedule that can accommodate a business’s needs.

There is also the matter of understanding how commercial equipment works. It is not the same as residential electrical work and requires additional training. You will want to choose an electrician that has knowledge and experience dealing with commercial electrical needs. Along with the know-how, you will also want to choose a company that can adhere to budgets and timelines for a project. Your business hinges on getting projects completed without any additional headaches. If you are in need of a commercial electrician, give The Electric Connection a call today and schedule your appointment.

Depending on the size of the warehouse we are discussing; the energy costs related to the lighting withing and even outside the warehouse can vary. But no matter what size, shape, or capacity a warehouse operation runs out of they all have one thing in common and that’s lighting expenses.

This is a common struggle for facility managers: trying to save money with the money that they have. And upgrading or investing in a new lighting system although can save money and produce a positive ROI overtime; can cause troubles considering it costs money upfront.

This post is here to identify the main points and benefits of a good lighting technology (LED), how it can improve a warehouse or factory facility, and how you can actually cut the upfront investment costs down significantly to make the investment even more-so worthwhile.

Improve safety through a better lighting system. In almost every aspect of the word quality; LED is the winner, especially in industrial applications. Firstly, if you’ve ever (or are currently) experiencing an issue with flickering or buzzing lights inside or out of your facility: you most like have metal halide or HPS fixtures in place. With LED they will never flicker or buzz not even near the ending of their lifespan.

Secondly, if you are experiencing an issue with dim lights just a few years after you’ve installed your MH or HPS light sources; you are experiencing a negative side effect of having these technologies. They are susceptible to higher lumen depreciation at a much faster rate than LED products do. Don’t get it wrong though, LED products still do safely and securely.

Decrease lighting bill costs. Did you know that you are burning up energy that you don’t really have to be burning up? It’s true, technologies such as metal halide are literally eating up 50% more energy than you would be with LED products installed. If you could reduce your lighting bill costs by 50% or more, what benefits could you see? For starters it would improve your bottom line. Otherwise, if you are proud to be a green company this could be just another way to further that mission and prove you are doing everything is takes to cut down on waste as much as possible. The list could go on but the main benefit that makes almost every person want to make the switch to LED is the 50% or more reduction in lighting costs month to month.

More Ways to Decrease Your Lighting Costs

Here we list a few ways that you can actually decrease your investment cost on a new LED lighting system in your DesignLights Consortium is, in basic terms, your rebate will more likely be better than just DLC standard.

Longer bulb life = Less Maintenance. LED technology is know to last 2-3 or even 4 times longer than other light sources out there. By upgrading to an LED system in your warehouse you are reducing the amount of times you need to pay someone to replace your burnt out lights. This can get especially pricey since most warehouses have high bay lighting which is typically high in the air. If you have 30, 40, or 50+ lights this can get very expensive for a warehouse facility. By opting in for a longer life light source (such as LED) you are going to reduce your maintenance costs dramatically (by 2-3 times).

Some Common Questions

Here are some very common questions that we are asked regarding lighting for a warehouse:

What exactly are the lighting fixtures used in warehouses and factories?

While an office in a warehouse will use the same lighting as any other office would (panels and tubes), the main floor and area of the warehouse is what we are talking about.

Typically people install high ceiling spaces.

What is a retrofit? And should I retrofit?

Any business knows that productivity is key to growth, let alone staying afloat. Whether you are talking about a production line, a traveling salesperson, and yes even your office space; productivity is going to be the main driving factor which will allow your business to not only stay in business, but also experience growth year over year, month over month.

Here we are going to describe 23 ways to improve office productivity which will in turn allow you to realize higher profits, more output, and less money being wasted to lost productivity.

First on the list? Improving office productivity through computer applications:

Science proves that taking more breaks allows us to be more productive.

How does that work if we technically will have less “work time” by taking all these breaks?

It gives us time to collect our thoughts, time to let our mind roam, and even some time to talk and bounce ideas off of others.

So, instead of making employees hate working because you limit them to one break a day; let them take a short one every hour or two and watch the ideas and productivity outputs increase!

Not only should you be organizing your desk, but also the entire office.

A cleared out area allows for a clear mind to work at much higher levels of clarity. Whether you have a cubical office design or a more open concept; requiring all areas of the office to be clear on either a weekly or daily basis should be a must.

Sure, not everyone likes to clear. But, if you give employees 10-15 minutes to clean their area at the end of every day I’m sure most people will be happy to do so (especially if you explain it is part of your initiative to improve productivity in the office)!

Some people have a habit of checking their email every 10 minutes while they are waiting for someone important to get back to them.

In reality, the likelihood of them replying back right away even if you get back to them quick is slim. On top of that, it seems down right desperate.

By implementing 2-3 time periods (again, depending on the department) that people should check their email; you will end the constant refreshing of email pages by a lot of your work force. This allows people to get back to work and pay much more attention to their work at hand.

There can be multiple things wrong with your lighting system that might be throwing off people in the office.

First of all, if you have fluorescent lights then you might just have a few (or a lot) of lights in your office that flicker or even worse, buzz. This can cause eye stress, annoyance, and a general distraction.

On top of that, you may have either an under-lit or over-lit office. Both are bad, and it’s up to you to find the optimal light output for your office. This can be done by surveying employees on your lighting system and going from there.

Lastly, low quality light can be an issue. An easy way to not only improve the quality of light but also get rid of flickering and buzzing light issues is by upgrading your reduce your energy usage by up to 30% or so. Sounds like a win-win situation here!

Not only will they help with productivity, but they will also clean the air of toxins which will keep the air fresh and not-so-stuffy.

Stop making it so difficult to get around. Make it easy to get to the bathroom, to the trash, or even to an outlet.

Time is money, and if people are having to spend time just to get to the most basic things you aren’t setting up your office for success (literally).

Using office design to increase productivity can be difficult, sure. But it doesn’t have to be all that complex. You could even get some people together to brainstorm what could be done to best optimize the space you have to best serve efficiency in the office. So while there will never be the “best office design for productivity” hack or tip (due to all offices being different), you can always use some general guidelines and common sense to help you out.

Wherever the noise may be coming from, while it may not effect everyone it may be effecting some people.

Now, this can be an easy fix if the noise is coming from within the office. To solve this issue, all you need to do is address the area of concern and fix it. But, what if the noise is coming externally on a frequent basis?

Well, you can do either of two things. Firstly, you can try to address or confront the external noise producer and see if there is anyway for it to stop at least during your time of work. If that doesn’t work, then you might need to install sound proofing technology into your walls. This can get pricey sure, but you’ve got to weight the benefits of having less noise in the office versus the cost it is going to be to make the upgrade.

Although you might think that you won’t be able to get everything in if you shorten meetings, you would be mistaken!

In fact, having shorter meetings make them much more focused and thus; more productive. Even if you have two meetings over one a week because they are shorter, it is much better to have two 10 minute meetings over one 30 minute one that lacks purpose.

On top of that, do you really need to have a meeting? Or, are you just holding meetings to “have a meeting?” If it is the latter, try scheduling meetings only when they are needed, rather just out of habit.

Looking for ways to motivate the office into getting stuff done? 43Folders.com and it’s a simple concept: work for ten minutes, break for 2, then repeat this 5 times (or an hour).

You might say, “are you mad?! No way I’ll let my employees take a break every 10 minutes.” But here it out…

Maybe you shouldn’t implement this tactic specifically, but make a variation that works for your needs but still allows for productivity to be most optimal. And yes, there will be times when extreme concentration is required for more than 10-20 minutes, and obviously this doesn’t have to be a “set in stone” type deal. Instead, make it a generally accepted practice to partake in such method of break and work balancing.

(We already talked about more breaks in #3, but we thought this hack was worthy of its own).

Have you ever listed a job listing opportunity with one of the qualifications as “multitasking?” If so, you’ve got it all wrong. In fact, you should be listing a qualifications as “the ability to be laser focused on one thing at a time.”

Multitasking Parkinson’s law” in short says that we will fill whatever time is allotted to complete a given task.

Why do you think people with a 3 month deadline to get a presentation done still find themselves struggling to get it ready to go last minute? Because they will fill the entire time they are given to finish it. This goes with any task, and if you shorten the time allotted to finish tasks you will see more getting done because people will work to fill the allotted time given.

This of course can be used too far and not given enough time to get things done with all the proper due diligence required. Finding a good balance of long enough but not TOO long will be difficult, but start looking into deadlines and what exactly defines how far out they get set and start thinking about setting shorter (yet still doable) deadlines.

Studies show that standing will not only improve health, but it will also improve productivity. Focus goes up and thus more work can get done.

call center workers showed that pollution in the office reduced productivity levels. As you can imagine, pollution is a major issue in a lot of places, especially in bigger cities.

An automatic transfer switch consists of an electrical power control device that reroutes electricity under certain power conditions. It enables the safe switching of power from one source to another. Consequently, this ensures a safe and reliable transfer of power while minimizing the risks of fire, damage, or back feeding of power to the utility lines.

An ATS ensures continuity of power to the load. However, the time between loss of power in the utility line and the time the load is connected to the alternative power source remains critical in some applications. For example, a power loss for a few seconds is unacceptable in some hospitals or with emergency equipment. In some of these installations, an intermediate power supply is utilized. These include the battery-based inverter or UPS power to fill the gap between the loss of power and connection to the generator power.

Advanced ATS devices may have the ability to detect the voltage dips characteristic of power failures and automatically start the generator before the utility power goes off completely.

Consumers need to ensure that the ATS will have adequate capacity to handle the generator power. Things to consider include the voltage rating, continuous current rating, and type of load. In addition, consider the mode of transfer, desired transfer time delay, ATS style, and more.

The four main categories of ATS devices are defined by the following transition modes.

Open-transition: The open transaction mode of operation disconnects the primary power before connecting the power from the secondary source. This break-before-make operation means a short duration when there is no connection to either of the power sources.

Fast closed-transition: The ATS is based on the make-before-break switching operation. It parallels the two supplies for about 100 milliseconds after which it disconnects one of the sources. This operation ensures that the load is never disconnected from power.

Soft closed-transition: The soft closed-transition transfer synchronizes generator power with the utility line and then transfers the load from the utility to the generator. When transferring the load back to the utility, follow a similar process.  In this case, the generator output slowly decreases until completely off.

Sub-cycle transfer: These are based on semiconductor switches and are the fastest automatic transfer switches. Upon detecting a power failure, the ATS transfers the load to the other source within the first one-quarter of the electrical cycle. This ensures no power interruption to the load. Sub-cycle ATS devices are the most complex and expensive compared to those using mechanical switches.

Since consumers may not have all the necessary technical knowledge to choose the correct application, it can be a good idea to hire a qualified electrical contractor to select the correct sizing and installation.