In the past, most utility lines were strung overhead; in this day and age public utilities have gone underground. Everything from telephone lines, to cable television lines, to gas and power lines, and even sewer lines are buried at varying depths. It is important to handle these lines with care. A knick or a cut to any of these lines can disrupt your residential utility service.

In Colorado, smart digging means calling 811 before you start any outdoor job to have your utility lines located and marked. Digging without calling can disrupt service to an entire neighborhood, harm you and those around you and potentially result in fines and repair costs. Calling 811 before every digging job ensures your underground utility lines are marked for free, and helps prevent undesired consequences. *

Though electrical lines may look harmless, high-voltage lines used to conduct electricity from one place to another can be hazardous or even deadly if a person accidentally comes into contact with one. Failing to call before you dig means that a piece of excavating equipment or a hand tool like a shovel or spade could inadvertently sever an electrical transmission line. This means any type of digging, whether you are planting trees and shrubs, re-anchoring your mailbox, or even placing landscaping edging has a potential hazard.

Depending on the size of the line that is cut, the damage might result in power loss to the home where the damage occurred and to other nearby homes and businesses. In a worst-case scenario, the line damaged could be a major transmission line serving a large area that would completely lose power until service is restored. Workers and homeowners in the vicinity of a severed electrical line are also at risk of electrocution if they touch the line itself or are in contact with a piece of metal equipment that touches an exposed electrical line.

* Taken from Xcel Energy, co811.org

Central forced air heating is by far the most popular kind of Zone heating, also called zone control heating, is a system of dampers installed in the ductwork of your home. The dampers are basically large valves that can open and shut to direct air flow. A damper is installed at each room junction, effectively splitting the house into a number of isolated zones. A thermostat is installed in each room with a damper, allowing that room total control over the air flow into it.

Zone heating is often installed to remedy the two problems mentioned above. Normal central air heating is inaccurate in which rooms it heats, so zone heating isolates each room to allow precise control over their climates. Central air heating causes a lot of uneven hot and cold spots, due to its reliance on a single thermostat. Zone heating compensates for this by installing many thermostats, ensuring that each room can be set to the comfort level of whoever occupies it.

By solving these two issues, zone heating saves energy and makes the rooms in your home more comfortable to be in.

Doing work around the house without calling for help is a common point of pride for many people, but an amateur should never tackle an electrical panel installation — regardless of the bragging rights on the line. No amount of pride is worth an incorrect electrical panel installation, especially when you consider just how important and complicated this component can be. Additionally, you should remember that electrical work can be extremely dangerous for anyone who isn’t a professional.

This principle most definitely applies to putting in a new electrical panel. If you’re knowledgeable enough, you may be capable of replacing an outlet or switch on your own. For bigger jobs like this, however, it is critical that you bring in an electrician. Not only would you be in danger during the installation itself, but even small mistakes made during the process can lead to future risk of fires and electrocution.

Electrical code requirements control the size of a panel in a newly built or renovated home, and these rules can vary based on your location. There is a reason there are strict measures for electrical panel installation, and those reasons are clear when you consider just how important these panels are. Panels are essentially a central hub for the electrical system in your home. They are an important safety measure as well. The power that comes in from the electric company passes through your electrical meter, and then into the panel. The panel directs the electricity through your home.

Electrical panels use circuit breakers, which control the amount of current provided to an outlet. They also serve to protect your system (and home) from power surges. If the breaker identifies an excessive amount of current, it shuts it off and protects components from the overload. It does this in a fraction of a second. This keeps appliances safe and also protects your home from the risk of a fire.

An incorrect electrical panel installation undermines the safety measures of your panel. An inexperienced installer might accidentally connect a wire to a breaker designated to allow more current than the wire can safely handle. This means unsafe amounts of electricity would be passing through, and the panel would not be able to do anything about it. An overloaded wire could easily spark, which could then lead to a fire.

An electrical panel isn’t a component you want to worry about after installation. Unless you’re a professional, there’s no way you can promise this won’t be an issue after you’ve finished working. Beyond that, an experienced electrician can make sure the panel lasts for a long time.

By using sophisticated equipment and materials, as well as in-depth knowledge of local energy code requirements, a professional will be able to achieve a level of efficiency and quality that would be out of reach for any amateur. Your home will be better protected from future issues after thorough wire testing once the installation is complete. A new panel installation is an involved, intricate process, and it’s important that even the smallest steps are correct.

When a fire breaks-out, most people just assume that it’s been caused by some inflammable substance. While that might be the case, it’s important to keep in mind that fires can also be caused by electricity. The one thing to keep in mind is that an electrical fire can’t be doused by water. Faulty or old electrical installations can lead to a fire and cause untold damage to life and property.

There are times when the electrical equipment or appliances in an electrical system can be the cause of overheating & overload, which can end up causing a fire. So, exactly what is it that causes an electrical fire? There are three main reasons, let’s take a detailed look at what these are and what can be done to prevent this from occurring:

Some properties have wiring that is decades old and electrical wires do tend to deteriorate with age. In fact, if the wiring in your house is over 15 years old, the recommendation is that you should get the entire property rewired. Older wiring wasn’t designed to bear the electricity load that current-day appliances demand. At times the electrical contractor might have cut corners and installed wiring of poor quality and this can lead to a similar problem, both of which can result in fires.

Arcing is quite a common problem with electrical wiring. As mentioned earlier, most homes have a range of heavy-duty electrical appliances. When you run a number of these appliances simultaneously in your home, it results in overloading and overheating of the wires. If the wiring is old, it will get heated up which will cause the insulation around it to melt – this results in arcing and an electrical fire may erupt too.

There are times when electrical wires are just too close to an external heat source which causes the outer insulating sheath of the wiring to melt. If this goes unnoticed, it can result in an arcing and fire.

Regardless of what has caused the electrical fire, if you attempt to contain it by pouring water on it that will escalate the issue. Water doesn’t have any effect on electrical fires; in fact, if you try to use water to douse an electrical fire, you can get electrocuted. What you need to deal with an electrical fire is a Class C fire extinguisher.

This type of extinguisher has dry chemicals that help contain the fire. Depending on how severe the fire is, it might be possible to completely bring it under control using a Class C fire extinguisher. If you don’t have this extinguisher, baking soda might help to some extent.

In case there is a break-out of fire on your property, the first thing you should do is switch off the power-mains; this is effective in containing the fire. Ideally every home and commercial establishment should have a Class C fire extinguisher or two, based on the size of the property and that should be used in case of any fire in the electrical wiring. An electrical fire is an electrical emergency and it’s crucial that you keep the number of a local, reliable electrician handy.

Never try to fix any electrical issues on your own. That can only lead to more complications and will compromise the safety of your property. We at Allround Electrical can rectify all types of electrical faults and we provide a range of electrical services. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263