If you've ever experienced a partial power outage, you know just how weird it seems. You thought you had a steady stream of power, so if it was compromised, you’d experience less power throughout the house rather than half on, half off, right? That’s not always the way it works. From the viewpoint of an engineer or a professional electrician, a partial power outage would be better described as a phase loss.

Although the bulk of your appliances run on 110 volts, your stove and laundry use 220 volts, as does your water heater ad HVAC system. That extra amount of power isn't a doubling of your electric flow, but full use of what's available. Your lights and appliances are actually running on half your available electric source in order to cut your bill by using the electricity more efficiently. The power flow coming into your home is actually two sets of 110 volts, designated as “phase 1” and “phase 2” that share a ground to safely eliminate excess power.

What that means in layman’s terms is that you have two distinct power sources. They run together in what appears as a single line, but that’s why you have a breaker box. There’s more going on in that box than just safety circuits to prevent overflow. It directs the power according to your needs.

In the breaker box, that power that is supplied is magnified exponentially. The full 220 volts is sent to those few appliances that need it. The rest of your home, the lights, outlets, television and hair dryer, well, they are actually only running on one phase, or half the available power. That’s why you think in terms of 110 volts, because your plug-in electric units only use 110 volts.

Make sure that the voltage of your LED light is compatible with the truck’s operating voltage. For example, you wouldn’t want to use a 6-volt light with a 12-volt system. That bulb will burn out very quickly. Or say you use a 24-volt light on a 12-volt truck—if you get any light output at all, it wouldn’t be near what is possible from that light.

When you’re installing new LED truck lighting, lubricate sockets, terminals, or any associated electrical connections with dialectic grease to seal out moisture and prevent corrosion. Because the grease can dry up, you should check connections periodically. It’s important to keep connections lubricated to maintain the functionality of your light. However, too much grease can interfere with the terminal/socket connection and prevent a light from functioning.

Be sure to know and understand the rules set in place in the light’s warranty. Doing unauthorized repairs or disassembling the light will most likely void its warranty. A driver should also know the correct person to contact about their LED truck lighting in case of light malfunctioning. The point of contact could be the fleet’s parts department, the purchaser, or the company from which the light was purchased.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Electrical fires can be extremely destructive and uncontainable, once they break out. An electrical fault and severe sparking in the electrical installations in one part of your property can easily spread to the other areas very quickly. This means the destruction caused can be extremely high and the fire can pose a threat to the people living or working on your property as well.

When you get the electrical system on your property installed by credible professionals, you can rest assured that there will be no problems and that they will be quite safe. However, if you live on an older property that also has old wiring, it can deteriorate or get damaged over time, and can prove to be extremely dangerous. This is why you should make it a point to conduct routine checks on all the electrical installations in your home.

Most electrical companies also design preventive electrical maintenance contracts based on your specific needs; they will visit your property at pre-decided intervals and conduct thorough checks on all the electrical fittings and installations. This helps identify potential & existing problems beforehand and these can be fixed before they pose a major hazard.

Aside from this, it’s also important that you be wary and conduct some basic checks on all the electrical installations. Here are some signs you should look out for:

If you find that a particular circuit breaker trips once in a while, it may just be an indication that you have plugged in too many electrical appliances and devices all at once into that particular circuit. However, if you find yourself resetting the circuit breaker too often, it’s crucial that you don’t ignore it.

The circuit breaker is built specifically to alert you when something is wrong with the system; this is why you should call in a skilled electrician and get it checked without delay. The constant tripping could be an indication of a much bigger problem.

If you hear buzzing sounds or notice sparking in an electrical outlet or if you detect a burning odour emanating from the outlets, that’s a very strong warning that something’s wrong with it, and that it needs to be replaced as soon as possible. Not only will the electrician check the outlet, but will also check and update the wiring connected to it.

If you experience an electrical shock while operating any appliance or device in your home, it’s an indication that there is electrical current leaking at some point. This could be caused by faulty wiring or even a grounding fault. The electrician will use special testing devices to see where the problem lies and will fix it quickly and efficiently.

Sometimes a light bulb might flicker because it hasn’t been fitted correctly in its socket. However, there are times when this problem is caused due to a loose circuit or loose wiring. It’s the same with other electrical outlets that don’t function as they should.